Your cart is empty.
Your cart is empty.
Technical Product Bulletin
- This 2 Part Epoxy is made from FDA Grade Raw Materials all U.S.A Made.
- The raw materials have been tested in accordance with USP biological reactivity tests, in vivo and received Class VI approval.
- Color is amber and hardens at room temperature after 24 hours. Does not bond instantly
- For bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment and devices.
- Provides low permeability to gases and vapors, and good resistance to water, weather, petroleum solvents, lubricants, to mild acids and alkalis, and to many other organic and inorganic compounds.
- 1 to 1 Mix Ratio
- Operating Temperature -70 to 145 °C / 90 to 293°F
Typical Applications Bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices.
Steven
Reviewed in the United States on February 26, 2025
Applied it to an item and let it sit for 24hrs to fully cure and it did not hold up at all. If even a bit of liquid gets on it the bond is no good and desolves (this happened after the 24hr cure process). So when it states "Weather Resistant" in the description it is a lie.
Igp
Reviewed in the United States on September 8, 2024
I needed this in the worst way possible! I was desperate! I was scheduled to give a special talk over a 3 day period and out of state, well, my upper plate had broken and I was worried 😧 sick! A friend who is a dental technician, told me to get this. And it worked like a dream, I’m so thankful for her advice and for the Amazon Seller, who gave great instructions 🩷😊
Robert zygarowski
Reviewed in the United States on September 27, 2024
It's excellent for bonding material, but you might want to change or clarify it's uses.People think they can cement teeth in their mouth, absolutely never !!!!!
Markus D
Reviewed in the United States on August 29, 2023
I use for repairing the occasional cracked bowl or plate. It's proved extremely durable and I haven't had any failures even after multiple times in the dishwasher etc. Great for kitchen and dishware repairs.
R. Goodman
Reviewed in the United States on August 15, 2023
Do not buy, the only info it comes with is a label full of warnings but no directions as to how to set it up or how to use it. In trying to figure out how to get the plungers into the container I got the glue on my hands and counter. Had to use alcohol and goo gone to get it off. Has a very strong odor to it Any company that won't include instructions on how to assemble and use an item is not a company that I wish to buy from. It says on the info can be used on dental products which is my I purchased it to repair my denture but I would never put this nasty stuff on something that is going in my mouth.
Customer
Reviewed in the United States on May 25, 2022
IF your tooth can not be held in place without glue do not attempt. You simple can not hold the tooth for six hours until the epoxy gets hard enough to hold tooth. --- hey Parent; be smart and dont do this to your kid. Do the right thing and take your kid to the dentist --- FDA-Bond 2 Food & Drug Administration Medical Grade Epoxy ... NOT!!! ... Amazon prints warning ... also Warning on tube ... BUT after a two weeks of screwing around with a loose cap and attempting to use "RECAPIT" junk also sold on Amazon had to get-r-done. SO I am not recommending this BUT this is how I did it: STEP #1 call your dentist for an appointment STEP #2 put on mixer cap and squeeze out at least three inches of stream on a baggie. #3 call your dentist for an appointment. #4 squeeze out a second stream of now better mixed product for use. take a sharp pinpoint object like a toothpick or as I used a DENTEK one of those plastic tooth flossers with a sharp point on other end. #5 Call your dentist for an appointment. #6 mix row two better and let sit on a clean plastic baggy for 45 minutes. This will allow off-gassing and curing time that doesnt have be done in your mouth. #7 Call your dentist for an appointment. #8 use mouthwash to clean and brush "tooth base" and cap. #9 clean and dry tooth. #10 call and make a dentist appointment #11 In my case the cap and tooth was a tight fit so I placed a drop about the size of the black circle inside your keyboard "O" key. (less than half a drop) IT IS IMPORTANT NOT TO PUT TOO MUCH AS THE PRODUCT WILL SEEP ONTO YOUR GUMS AND SMELL AND TASTE WAY TOO MUCH. If the product oozes out under the tooth - CLEAN AND START OVER. #12 so place your cap on tooth and ensure its tight and correct and place a cloth between the teeth and bite to ensure the tooth is tight. DO NOT MOVE . #13 the tooth will now off-gas a little for the next three hours. Check the glue on the baggie and it will help you realize when the tooth if tight enough to hold itself and allow some normal activity. You will likely discover it takes about six hours before the epoxy is hardened and little. I wouldnt recommend using this tooth for eating or tearing. It took about 12 hours to get any close to tight. #14 when to go to the dentist expect to get scolded and maybe charged extra to re-clean the tooth for permanent placement. GOOD LUCK WITH THAT !!! UPDATE: despite best efforts to follow bestest procedures ... fell off ... forget about using this for teeth ... contact you dental provider and get it done the correct way !!!!!!!!!!!
Storming Bunnies
Reviewed in the United States on September 28, 2018
Exactly the adhesive I needed for my cold brew filtering system.
iamanooj
Reviewed in the United States on October 25, 2018
Good epoxy, and great application mechanism. Just be aware that it is not very viscous, and takes a good amount of time to cure/become viscous.
Recommended Products
$65.52
$ 25 .99 $25.99