Your cart is empty.
Your cart is empty. Low Profile - 37.5"/95.25 cm from Base of Stand to Airlock, 33.5"/85.10cm without Airlock
Sturdy, solid metal construction
Arrives Flat
Easy to Set Up with instructions
Powdercoated black
Designed for the 7.9G/30L FastFerment
Works as a secondar, tall stand for the 3G/11.3L FastFerment
Draude
Reviewed in Canada on May 31, 2023
Was not the easiest to assemble, hard to get screw holes to line up. Once assembled it is fine.
Saulopez
Reviewed in Mexico on October 31, 2023
Me parece genial la forma que se ancla el fermentador
Customer
Reviewed in the United States on January 31, 2023
I’m a big fan of the entire fast fermenters system. I own two, one which I ordered with a wall mount. That is why I purchased the stand for more location flexibility. My only minor complaint was the Allen wrench, that they included in the package was a 5/32” but requires a 3/16” hex key wrench. The directions DO say to use pliers or a 3/16” hex key, I’m just puzzled why include the wrong wrench in your kit?
James Barrientez
Reviewed in the United States on September 14, 2022
Easy to assemble and made very sturdy to hold the fermenter!
John Conner
Reviewed in the United States on April 24, 2022
Came on time. Very happy with how sturdy this is. Told my wife I could use it as a car jack-stand. However, the allen wrench it came with was the wrong size and the threads have paint on them so this is hard to screw together. You will need plyers. Over all, it is worth it. Pay attention to the angle of the threaded holes.
S
Reviewed in Germany on March 23, 2021
Leider ist es nicht sehr gut verarbeitet. Schrauben drehen durch. Die Preisleistung stimmt für mich hier nicht.
M. England
Reviewed in the United States on August 3, 2020
The instructions are vague. It is not difficult to assemble but you have to know that the angle of the holes determine whether the long poles are at the correct angle. Trial and error is how I discovered it. Paint seeped into some of the holes making it nearly impossible to screw in the poles. I ended up using a pair of pliers and that resulted in scratching the paint.
Nick
Reviewed in the United Kingdom on March 30, 2019
Makes the Fast Ferment easier to use
Farmboy
Reviewed in Canada on August 18, 2018
Nice piece 'o engineering. Came in a med pizza size box. I have a genuine FastFerment conical and stand and it looks like the real deal. This 'kit' has 2 rings one large one small, 4 straight rods and 4 allen bolts with plastic caps. Bonus! I received 5 allen bolts and caps. Each rod has a threaded male end and threaded female end. The male end secures itself very nicely in the threaded upper smaller ring. Do these first and tighten. The bottom ring is secured by screwing allen bolts in to the end of the rods thru the holes in the larger ring. Screw them all in loosely at first then tighten firmly in a crisscross pattern. Thought it would be flimsy -- don't recall if it said FastFerment on the instruction page or not -- but it's a nice sturdy unit. The V-Vessel conical I bought it for sits in it quite nicely. Recommended!!
David G
Reviewed in the United States on May 1, 2018
I tried to avoid buying this, but it really is a necessity. I did my first batch without it and cut a hole in the bottom of a bucket to stick the FastFerment on but it just wasn't sturdy. This is a sturdy base and I would say it is a requirement for the FastFerment.
Aaron D. Larson
Reviewed in the United States on April 2, 2017
No installation issues. Nice and durable. The only "knock" I have on this is that I wish the stand would give 4-6 inches more clearance at the bottom to make bottling easier. I quickly figured out a work around that caused no undue harm to stand, FastFermenter, or beer so I am still giving this 5 stars.
J.Walter
Reviewed in the United States on December 12, 2016
The holes you were supposed to screw the vertical pieces into were either too big or too small. One of the four wouldn't even stay in, it just kept falling out. The others were to difficult to get into the holes as the threads were rusted... Who sends out rusty equipment? As you can see from the picture, the vertical pieces angle into the top piece, this is not how it is made. The pieces go straight up and have to be bent to fit the top piece. When you bend them, the holes don't line up and you can't get the screws in.Overall, an awful piece of equipment. Worst part is, while they accepted my return, they are making me pay for shipping. Be careful when buying this product or from Home Brew Ohio. They may ship you a terrible product, then make you pay to ship it back. Awful experience.
Bob Watts
Reviewed in the United States on July 19, 2015
Maybe they changed the construction of this item - or maybe the other viewers here were expecting more than I was expecting. I was expecting a flimsy few pieces of wire that was somehow welded together. What I got was a sturdy and well made stand! I used my FastFerment on the wall bracket and wanted to see if this would work in an alternate environment. The item I received does not, in any way reflect the cheap waste of money that I saw described in the reviews for it. I usually can rely on reviews here on Amazon - in fact I do almost 100% of the time. These reviews were simply wrong. I delayed my order unnecessarily. I'm glad I took the chance and ordered this stand. My only regret is that they haven't come out with additional accessories for the FastFerment set up.
Recommended Products
