Your cart is empty.
Your cart is empty.Evan-Fischer Header Panel is an affordable replacement product for your restoration needs; this is an OE replacement item, manufactured in accordance to industry standards to ensure product durability and reliability. All Evan-Fischer products are covered by 1-Year Unlimited Mileage Warranty.
ShaneFluff
Reviewed in the United States on October 21, 2024
Fit the mustang perfectly
Wanda Hill Stroud
Reviewed in the United States on April 7, 2024
Good price and value for a replacement that was damaged in a small bump. This allowed me to fix myself without going through a body shop. Very pleased with product
Stephanie L.
Reviewed in the United States on April 10, 2024
Perfect fit very pleased
Ryan
Reviewed in the United States on May 27, 2017
i installed this on my 2001 mustang v6 and it fit perfectly.. its not as thick and durable as the original part but it does the job just as well as the original. It shipped almost immediately after i placed the order and was the first part of a large order to arrive. Kudos to the seller for prompt shipping. I also bought some new headlights and they fit perfectly into this piece. Dont be afraid to buy this header panel. Its a perfect fit...
Ralph Hackney
Reviewed in the United States on February 8, 2017
Work pretty well...had slight bow in the center but with the bumper cover on it you can't tell
Customer
Reviewed in the United States on July 16, 2016
Came fast and perfect fit. The only negative is that one of the bumper mounting holes was busted off not even loose in the box. Not such a big deal because the bumper is mounted with plastic screws in that spot anyway and it is still easy to secure.
Edward A. Robertson
Reviewed in the United States on March 24, 2016
Compared to the original, brittle, hard plastic OEM header panel, this replacement header panel is made of more flexible ABS plastic. It is significantly lighter than the original, but still seems to be quite strong. But it was a bit of a struggle to install. I loosened up the inner metal brackets to provide some play, but the width of the inner section of this header panel was still too narrow. I muscled it on and all eight fastener holes ended up matching up with the inner and outer brackets. However, the bottom panel of the center section ended up bowing upwards from the overly tight fit. I was a bit worried about that, but it was not visible after installing the bumper cover and grill. The new replacement headlights slid snugly into the replacement header panel and the slide locks fit perfectly. I debated whether to give it three or four stars. The good news is that it is inexpensive compared to the other options I found, the fastener holes line up well, the headlights fit well, and it works fine once you manage to muscle it on. The bad news is that you may have to muscle it on. I also had to trim off a few areas of mold flashing before I installed it, but that was quite simple to do using a utility knife.
John
Reviewed in the United States on July 6, 2013
Excellent, perfect replacement. Don't spend $100-200 from the factory or from "upgrade" shops, this is exactly what you need. It comes black, fresh out of the mold, so if you want it painted, obviously you need to go get that done. I don't care though, I just wanted to replace it on my Mustang. Another thing, this one is a bit lighter than the stock one. The box that this was delivered in weight about 7.5 lbs., the same box with my old one that had a few chunks missing weighs over 10.5 lbs. So that's 3 lbs of savings.INSTRUCTIONS:1-Open hood, prop it up.2-Remove headlights by removing the Skewers behind them (2 on each side) and unclip your headlight and turn signal. Jiggle the headlight a little bit and it will slide out.3-Remove the bumper (there's 7/16" nuts you want to remove next to the fender, there's also a screw on each side, there might be more on yours but that's all that there was on mine)4-There's 8 5/16" bolts that you'll want to remove, 2 behind each headlight, and 2 on the inside edge of each headlight area.That's it! It'll slide right out. If you have the Mach 1 Delete kit, just swap everything and bolt it back up. Took me probably 30-45 minutes, and that's only because I'm very messy with tools and have a hard time finding the things that fit (that's why I included it for you)I bought mine from the seller Autos Depo, and they were helpful as well. I asked them if it was the right part to replace a certain piece of the panel, they responded right away AND they send me an extra picture.If you need a header panel for your mustang (and you will eventually if you don't know), get this one! I uploaded a few comparison pictures as well, hopefully this helps you decide if this is right.
Recommended Products
$135.55
$ 62 .99 $62.99
$235.79
$ 99 .00 $99.00
$72.83
$ 29 .99 $29.99
$205.11
$ 81 .99 $81.99