Your cart is empty.
Your cart is empty.Product Description
How to installation:
1.Gauge May Be Mounted In 2"/52mm Dia holes Or In Auto Gauge Custom Mounted Panels .Secure Gauge With Mounting Clamps Supplied.
2.Drill 3/8" Dia .Holes And Install Rubber Grommets Where Pressure Or Vacuum Line Passes Through Sheet Mental Such As Firewall.
3.Attach Nylon Pressure Line To Fitting On Back Of Gauge Using Adaptor ,Ferrule ,And Compression nut .Route Line Through Grommets To Engine Compartment .Connect Line To Pressure port On Engine By Using 1/8" Adaptor Ferrule And Compression Nut For Turbo And Prossure Gauge Or 1/8" Adaptor And Fitting For Vacuum Gauge.
4.Start Engine And Thoroughly Check Installation For Leaks. Twist In Light Socket Assembly And Connect One Wire(Yellow) To Dash Lighting Circut Or Other 12V Power Source And The Other Wire(Black) To A Good Ground.
Package includes:
1 x Oil Pressure Gauge
1 x Oil Pressure Sensor
Smoke tint lens during the day,Clear and bright LED Display during the night.
High quality movement Make product measurements more accurate,
Faster measurement, pay attention to your car in real time
Configure the LED to light up, cool and bright, and watch more clearly in Night
ben
Reviewed in the United States on February 27, 2025
The guage is great... the oil sending unit is hugeIf you have a tight space... nope..
joe blow
Reviewed in the United States on February 15, 2025
great !!!
Customer
Reviewed in the United States on February 16, 2024
The gage installation was pretty straight forward install. It looked and worked great for the first 4 months and then failed. This unit is installed in a Polaris side by side in Maine and it is used daily. The unit stated to intermittently read 0 psi oil pressure after it was installed for 4 months. Oil levels are completely full and I've verified the oil pressure is correct with another gauge so it looks like the gauge or the sending unit failed.
pete prieto
Reviewed in the United States on December 4, 2024
It’s a great product. I never thought it was bad looking gauge it just that the first one didn’t work, but it’s a wonderful looking gauge. Thank you for the craftsmanship Mr. P.
Deb
Reviewed in the United States on December 30, 2024
This looks really good in my husband's 71 scamp
Ben
Reviewed in Canada on November 7, 2024
Cheap and works great
Shawn Bolinger
Reviewed in the United States on November 17, 2024
Installed in race car and works perfectly. No complaints here.
Armando
Reviewed in Mexico on June 26, 2023
Le conecté el negativo y ni aún así marcó correcta la temperatura, el bulbo original del coche reportaba correctamente 90C por ejemplo, y este medidor andaba brincando 110-120. No lo compraría nuevamente
Kapila Patikiriachchige
Reviewed in Australia on March 18, 2023
The media could not be loaded.
Pablo N.
Reviewed in Mexico on March 16, 2023
Fácil de instalar
Tim S
Reviewed in the United States on October 11, 2023
I installed this in my John Deere 6x4 Gator to keep an eye on the engine temperature. The vehicle does have an idiot light that came on a few times but I wanted to know what the temperature actually is since the radiator fan does not run constantly.This was an easy install. I purchased an Universal Radiator Hose Sensor Gauge Adapter (28mm) to spice into the radiator hose coming out of the engine an inserted the sensor into the adapter. I cut a 2" hole in the plastic dashboard to mount the gauge.The minimum reading on the gauge is 104F when cold. But as soon as the engine warms up the thermostat opens, the gauge responds immediately.
Conrad Welsing
Reviewed in the United States on April 18, 2023
The media could not be loaded.
Ryan
Reviewed in Canada on June 9, 2022
I bought the volt, oil pressure, water temp and tachometer guage. DONT BUY!.Volt Guage - reads 1.2v under what my Trucks actual voltage compared to my fluke meter.Oil pressure - my old guage worked fine. The new one won't read on the included sending unit or off my old sending until only ever stays on 150. Even when truck is not running.Water temp - mine read about 10-12 degrees coler then the truck actually was running. RPM guage - Well what they don't tell you in the ad description is this guage is NOT compatible with carberated engines. It does not matter what setting you set it to 4cyl, 6cyl, or 8cyl they all read for my between 7000-9999 rpm idling.They look nice and bright. To bad they don't work properly.
Recommended Products