Shopping Cart

Your cart is empty.

Your cart is empty.

EPEVER MPPT Solar Charge Controller 40A 12/24/36/48V Auto Max PV 150V XTRA4415N-G3 Solar Panel Regulator for Gel Sealed Flooded Lithium User

Free shipping on orders over $29.99

$149.99

$ 72 .99 $72.99

In Stock

1.LensColor:Mppt 30a (xtra3210n-g3)


About this item

  • EPEVER MPPT solar charge controller 40A, Max PV 150V, 12V/24V/36V/48V auto. 2024 upgraded version(XTRA4415N-G3) add new function: Independent voltage regulation constant voltage output function, namely, the controller’s battery terminal can be connected to loads directly when there is no battery. It is friendly to various lithium batteries, avoiding the instability output voltage caused by the internal protection of the lithium batteries. The low self-consumption design significantly reduces the static power consumption and extends system standby time.
  • Support multi battery types: Sealed, Gel(AGM), Flooded, LiFePO4, Li(NiCoMn)O2, User. Equipped with a stable self-activation function for the lithium battery. Battery temperature compensation. Upgraded ultra-quiet design solves the problem of sharp noise from previous versions of the device.
  • Comprehensive electronic protections: Protection Built-in Against Reverse Polarity, Overcharging, Over-discharging, Overload, Short-circuiting, and Reverse current. Charging power reduction automatically for over-temperature. Limit the charging power & charging current to no higher than the rated value. Operation at full load without charging power reduced in the working temperature range.
  • Advanced MPPT technology: ultra-fast tracking speed, tracking efficiency is up to 99.5%. Maximum DC/DC transfer efficiency is as high as 98.5%; full load efficiency is up to 97.2%. Wider MPP(maximum power point) running voltage to optimize PV utilization. Real-time energy statistics function.
  • Monitor and Set parameters: Three different color LED indicators and LCD display show your PV/Battery/Load working Status more intuitive; Five buttons easy set working mode and parameters; RS485 communication interface with optional BLE or Wi-Fi modules for remote monitoring to adjust settings by EPEVER APP, or program via PC software, remote meter MT50. Wide range applications such as communication base station, home system, street lighting system, marine system, RV solar system, and site monitoring system.



4.4 out of 5 stars Best Sellers Rank
  • #491,624 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden)
  • #483 in Renewable Energy Controllers
Batteries required No Included Components MPPT40A(XTRA4415N-G3)

Product Description

EPEVER 40A MPPT Solar Charge Controller XTRA4415N G3 New Version


EPEVER MPPT Solar Charge Controller 40A,12V/24V/36V/48V DC auto work, Solar Panels Max PV 150V, Max input Power 520W/1040W/1560W/2080W. Common negative grounding. Applicable battery types : Sealed, Gel(AGM), Flooded, LiFePO4, Li[NiCoMn]O2 and User-defined

Package List:

  • 1 X MPPT Solar Charge Controller 40A (Model: XTRA4415N-G3)
  • 1 X Temperature sensor unit for controller(Model: RT-MF58R47K3.81A)
  • 1 X Manual (English)
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

video

Merchant Video
Rated charge current : 40Amp
Rated discharge current : 40Amp
Nominal system voltage: 12V/24V/36V/48V DC auto work (Manually select 12V/24V/36V/48V for Lithium type)
Max. PV input power: 520W charge for 12V battery, or 1040W at 24V, or 1560W at 36V, or 2080W at 48V
Max. PV open circuit voltage: 150V(at minimum operating environment temperature) , 138V(at 25℃ environment temperature)
Support Battery types : lead-acid: Sealed(default), Gel (AGM), Flooded, User ; Lithium: LiFePO4(12V/24V/48V ), Li (NiCoMn)O2(12V/24V/48V), User(9~68V)
Battery voltage range : 8~68V
MPP voltage range : (BAT+2V)~108V
Grounding : Common negative
RS485 interface: 5VDC/200mA (RJ45)
Working environment temp : -25℃~+50℃
LCD backlight time : 60S (Default)
Recommended Wire cable : #6AWG(16mm2)
Mounting hole size : Φ5mm
Dimension : 255*189*83.2mm
Weight : 2.47 KG

Connect solar system in the order of 1.battery > 2. load > 3.PV array

mppt solar charge controller
  • Capable with Lead Acid,Sealed, GEL(AGM), Flooded, LiFePO4, Li(NiCoMn)O2 Battery, user mode support custom battery parameters manually to solve the voltage matching common issue of multiple battery.

  • Adjust parameters by controller five buttons or Opition accessories : Bluetooth/WiFi module supports connecting APP to realize the communication function and parameter setting.


perfect thank u
Reviewed in the United States on January 21, 2025
good quality
Altivec
Reviewed in Italy on September 6, 2024
Epever Xtra-N, 40A, 100V.Regolatore di carica efficiente, di costruzione solida che è garanzia di sicurezza. Una volta fissato alla parete basta collegare i cavi della batteria e subito dopo i cavi dei pannelli per vederlo subito all’opera. Siccome ho dei pannelli collegati in parallelo ma con caratteristiche diverse tra loro, questo regolatore è in grado di ottimizzare la quantità di energia solare in ingresso e di mettere al contempo in sicurezza la batteria essendo di tipo MPPT e quindi in grado di intervenire rapidamente in caso di sovra e sotto tensioni. Un ottimo acquisto, tra l’altro in promozione, che non fa altro che consolidare la fama mondiale dell’azienda Epever. Ho avuto modo anche di contattare il loro supporto tecnico che, gentilmente, mi ha guidato nell'ottimizzare le impostazioni in base agli elementi (batteria, pannelli) in mio possesso, consigliandomi per il meglio.
Morris W
Reviewed in the United States on August 26, 2024
I compared it to the internal solar charge controller of a Jackery 1000+ and it delivered under quite sunny conditions 45W of a 100W solar panel, while the Jackery could make it to 48W.I consider this a very good result. The minimum voltage for the PV charging is 2 V above the battery charging voltag since this is not a buck-boost-charger. For e.g. a 15V DC module will not deliver enough volts to charge a 12V Lifepo4-Battery. This is not really a minus, since it is clearly stated as such in the manual, but is somehwat inconveniant since a lot of available smaller
Jorge
Reviewed in Spain on August 24, 2024
Contento con mi compra buen producto
Roy
Reviewed in the United States on June 9, 2024
Very good controller.Till now used simpler ones, this one gave me at least 20% more Ampers.Simple configuration, bought the wifi adapter, and can see view and configure though the phone app.
straight facts
Reviewed in the United States on June 17, 2024
I needed a quality solar charge controller I could trust out in the middle of a forest where it functions for months without being there. With the FOB WIFI added, I am able to remotely monitor the solar system.Well worth the money.
pam
Reviewed in France on December 4, 2024
Installation pour reguler un ensemble de panneaux solaires sur un camping car.Recharge des batteries lifepo4 sans problème. Très satisfait du produit.Je recommande
Kris
Reviewed in Germany on December 2, 2024
Mittlerweile sind bei mir 1500 kWh durchgelaufen ohne das es abgefackelt ist
Rick Tara
Reviewed in the United States on July 3, 2022
Great solid charge controller.
Handy Evenhanded
Reviewed in the United States on December 4, 2021
This XTRA 3210AN was my second Epever charge controller, which I paired with my first LiFePo battery. I had worried about the firmware update process, since I use Macs, and the software was for Windows. No sweat. I borrowed a Windows and the seller patiently guided me through every step of firmware update process. They answered each question I posed within, at most, a few hours. After I'd updated the XTRA3210, they even helped me update my previous Epever, a Tracer 4210, so that I'll be ready to replace the AGM battery it controls with a LiFePo when the time comes.
tootie
Reviewed in Mexico on November 3, 2021
Controlador MPPT Funcionando y gestionando de manera adecuada mi pequeño banco de 4 baterias de 100 ah, mucho mejor que mi antiguo controlador PMW
Alex
Reviewed in the United States on October 25, 2021
While the unit seems solid and well reviewed, It is very misleading to claim that this supports lithium and user-defined batteries. To be clear, the EPEVER MPPT Solar Charge Controller DOES NOT Support lithium batteries or user-defined battery parameters. This is VERY MISLEADING and I only hope I can save others from completely wasting their times . I have owned many charge controllers over the years and all have been adjustable directly on the unit so this is very unusual.
RJ
Reviewed in the United States on October 12, 2021
This does a good job of converting solar panel power to battery power. The manual is confusing though. It has 2 controllers in it. The Lithium setting is GEL . This is because GEL does not use equalize.
Recommended Products