Shopping Cart

Your cart is empty.

Your cart is empty.

Engine Oil Pressure Gauge Transmission Fluid Diagnostic Tester Tool Kit 12PCS, 500psi Automatic Gearbox Pressure Meter with Hose and Adapters

Free shipping on orders over $29.99

$22.99

$ 10 .99 $10.99

In Stock

1.Color:Blue Case


About this item

  • Engine and Transmission Oil Pressure Test and Diagnostic: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc
  • Easy to Check Engine Oil Pressure: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done
  • Fitment Type: The transmission pressure gauge kit includes 12 pieces selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on
  • Pressure Gauge: Transmission pressure gauge adopts rubber cover protected 3-1/2 inch large dial. 0-500 pounds per square inch big scale range, is more suitable for testing big engine. No pressure holding function, the gauge pointer will automatically return to zero when the measurement is finished
  • Premium Hoses: The 40 inch long rubber nylon resin hose is equipped with a 1/8 inch NPT brass adapter, can be screwed to connect other 11 pieces adapters. The maximum working pressure for the hose is up to 500 pounds per square inch
  • Blow-Molded Case: This automatic transmission pressure tester gauge set includes 1 piece oil pressure gauge with hose and 11 pieces adapters. Easily accessed and organized in a sturdy wearproof plastic case for easy transportation, simple storage, and quick identification. Locking buckles for added security and molded handle for comfortable travel



Product Description

JIFETOR Engine Oil Pressure Gauge Transmission Fluid Diagnostic Tester Tool Kit 12PCS, 500psi Automatic Gearbox Pressure Meter with Hose and Adapters

engine oil pressure gauge

PACKING LIST

  • 1x 3-1/2" Pressure Gauge with 40" Long Hose and 1/8" NPT Brass Adapter
  • 1x 3/8" NPT Male x 1/8" NPT Female Brass Adapter
  • 1x 1/8" NPT Female x 1/8" NPT Female Brass Adapter
  • 1x 1/4" NPT Male x 1/8" NPT Female Brass Adapter
  • 1x 1/8" NPT Male x 1/8" NPT Male Brass Extension Adapter
  • 1x 1/4" NPT Male x 1/8" NPT Male Brass Adapter
  • 2x 1/8" NPT Male x 1/8" NPT Female Brass Adapter(90 Degree Elbow)
  • 2x 1/8" NPT Male x 1/8" NPT Female Brass Adapter
  • 2x 1/16" NPT Male x 1/8" NPT Female Brass Adapter
  • 1x Customized Blow Molding Case, 12-3/4"L x 10"W x 2-1/2"H
  • 1x Instruction
easy used

EASY TO OPERATE

1. Remove low oil pressure switch

2. Attach tester using appropriate adapter(s) for the engine

3. Start engine

4. Read the pressure on the gauge

5. Verify vehicle oil pressure is normal against manufacturer's recommendations

6. Remove tester and turn off the engine

7. Replace the low oil pressure switch

result

DIAGNOSTIC RESULT

Please refer to equipment manufacturer's operation instruction and compare to the manufacturer's recommended readings, to check if the reading is out of the normal range. And check if the dashboard light works well or not

Below the minimum oil pressure: blocking oil strainer or oil filter, broken pressure-limiting valve spring , poorly working oil pump, low oil viscosity

Above the maximum oil pressure: high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open

NOTE

1. Please wear gloves and goggles when use

2. Test oil pressure by professionals or under the guidance of a professionals

3. You can use Teflon tape to wrap around thread connector to get better sealing

Customer Reviews
4.5 out of 5 stars 694
4.3 out of 5 stars 173
4.2 out of 5 stars 589
4.3 out of 5 stars 329
4.3 out of 5 stars 533
4.3 out of 5 stars 238
Application Engine cylinder pressure tester Engine oil pressure tester Engine cylinder pressure & leak down tester Fuel injection pump pressure tester Fuel injection pump pressure tester Engine oil & transmission fluid pressure tester
Gauge Index Range 0-300psi 0-100psi 0-100psi, 0-100% 0-100psi 0-140psi 0-500psi

Mike reid
Reviewed in the United States on December 21, 2024
Guage never worked & most adaptors are wrong.
Skubasteve
Reviewed in the United States on May 21, 2023
Kinda sketchy markings on the hose - 300psi w.p. - hopefully it doesn't explode when I use it. It was $28, so I wasn't expecting much, heck just the fittings it includes are probably worth that.
SanDiegoV
Reviewed in the United States on July 11, 2022
Used to checkout oil pressure on our boat’s 2 Diesel Cat engines. Easy to connect, worked great
Richard
Reviewed in the United States on March 24, 2022
I knew my old Jeep's oil pressure was not 90 PSI. This gauge showed it was 35 PSI. I replaced the oil sending unit and it now reports 35 PSI. Easy to use and to clean up when you remove it.
Sean
Reviewed in the United States on December 13, 2022
Had an issue with my oil pressure sensor that I recently had done at Midas (don't take your car to Midas) which I'm assuming they only took my money and did nothing else I was still getting the light after I left them I tested it with this thing tested fine put a new sensor in it myself cuz I didn't know where it was at first works fine this this pressure tester worked great for me help me find out that it's not my engine it's just the sensor they put in.
Paul Zoff
Reviewed in Canada on November 30, 2022
Couldn't use this product didn't have the right fittings for the job I needed it for
Ryan
Reviewed in the United States on January 21, 2022
Assembly was cumbersome, you kinda have to twist the whole hose/assembly to install it. At startup, the pressure was reading at half of what it should have been. When the engine was hot, it read 0. My oil pressure isn't perfect but it sure isn't 0. Sure enough, tested with a name brand calibrated gauge and my oil pressure was fine.Take it from me, don't cheap out and settle for junk products like this. Rent or buy a good unit.
Charles Cutsinger
Reviewed in the United States on September 2, 2021
the gauge worked well. readings with it saved me from buying a oil pump i did not need. great seller.
Gabriel
Reviewed in Mexico on February 21, 2021
Le falto el niple para chevrolet
roberto
Reviewed in Mexico on February 11, 2021
muy bien el producto. solo le falta el adaptador para el sensor de chevrolet trailblazer envoy etc. por que ninguno es de rosca similar por lo demás funciona bien.
Larry C Amick
Reviewed in the United States on January 21, 2021
I used it to be sure my oil pump was good it worked perfect great tool.
Magali Hernández
Reviewed in Mexico on April 8, 2021
Muy buen producto de relaciona totalmente la calidad con el precio
Armando Rangel Ramirez
Reviewed in Mexico on December 8, 2020
Muy buen producto