Shopping Cart

Your cart is empty.

Your cart is empty.

Emery Edger Edging Tool for Edges and Trim | Paintbrush Not Included - Attaches to 2 Inch Brushes - Patented Design

Free shipping on orders over $29.99

$12.99

$ 6 .99 $6.99

In Stock

About this item

  • WINNER OF THE “RETAILER’S CHOICE AWARD”: At largest home improvement show in the world. Emery Edgers offers the best-performing paint trim tool available.
  • TWO-SHIELD RESERVOIR DESIGN: Our innovative Patented Two-Shield Reservoir Design has finally made it possible to quickly paint perfect edges without tape. Other edgers can only access about 30% of your total trim work. The Emery Edger successfully tackles 100% of your trim work.
  • PAINTBRUSH NOT INCLUDED - ATTACHES TO 2 INCH PAINTBRUSHES: Do not use an angled brush with this edger. The edger works best with a flat sash brush.
  • NO DRIPPING PADS AND MESSY WHEEL MARKS ON YOUR TRIM: Guaranteed to produce error-free edges every time. Thin molding, baseboard edges, popcorn ceilings, edges on textured drywall, uneven trim, vents, light switch plates, smoke detectors, on and on.
  • BETTER THAN EDGERS WITH PADS AND WHEELS: Emery Edger utilizes a patented "two shield system" which ensures paint does not travel around the shield and reach your trim. Edgers with pads and wheels make many messy mistakes that cost you too much time and frustration.



Product Description

Emery

logo
Two-shield system

The Emery Edger utilizes a "two-shield system" in which paint creeps around the inner shield, but then travels into a reservoir and is blocked from reaching the trim by a second outer shield. The inner shield is also extremely thin, which produces a professional tight edge with absolutely no gap between the paint line and trim every single time.

Award Winning New Paint Edger (Awarded by National Hardware Show - 2019)

The Only Edger Able to Tackle 100% of your Trim Work

Emery Edger is the only tool available that can successfully tackle 100% of your trim work, while other edgers can only reach roughly 30% of your edges.

All paint edgers on the market utilize some type of single shield system with wheels, and they simply do not work effectively.

  • High Quality Blended Nylon/Polyster Paint Brush
  • Built-In Double Shield Perfect Edges
  • Fabric Pads Sold Separately
  • 1.5" Solid Wood Handle
ytf

43

Old and Uneven Baseboard

Only the Emery Edger can successfully create perfect edges against uneven trim. The shield simply follows along with the brush, tackling any area accessible with a brush.

small

Impossible Areas To Tape

Only the Emery Edger can tackle any type of awkward trimming area, reducing the amount of tape needed to zero.

brush

Textured Drywall

Only the Emery Edger has success on textured drywall. All other edgers need a perfectly flat and even surface to function, while still not achieving a perfect edge.

4

Difficult Fixtures

Stop wasting time removing light switch plates, electrical plates and vent covers. No other edger is able to reach these areas with such ease.

Edgers

Prosa599
Reviewed in the United States on February 17, 2025
The paint goes right throw to the other side and it doesn’t do what it supposed to do
Gary Chauhan
Reviewed in the United States on January 24, 2025
This was exactly what I needed! Please consider adding these to local stores as well. Great product!
Freeride
Reviewed in the United States on September 27, 2024
As a pretty handy guy who’s always adding to my home improvement list, the Emery Edger is a game changer. I’ve tried other edgers before, but they either drip or leave marks—this one does exactly what it says. No messy pads or wheels to worry about, and it attaches perfectly to my 2-inch flat brush. Makes painting trim and edges a breeze. I knocked out an entire room without tape, and the lines were crisp every time. If you’re serious about your projects, this tool needs to be in your kit. Worth every penny!
Kimberle
Reviewed in the United States on July 5, 2024
I had to repaint my daughter’s room and was looking for an easier way to paint the edges without having to use tape. This easily attached to my paintbrush and worked like a charm. I can’t wait to share this with my dad who always seems to be painting something.
Erin Schwartz
Reviewed in the United States on April 29, 2024
The idea for this product is wonderful. Taping before painting is such a tedious job, but the mess you have if you don't tape is worse. I was hopeful this would save me some time and clean up. I ordered it to fit the 2 inch paintbrush I had purchased, however it didn't fit. It was too tight, it wouldn't screw together. I was unable to use it.
Fooliggy
Reviewed in the United States on December 6, 2022
Lot's of marketing hype but very little value in having this tool. It was disposed of after several attempts at using it! NOT worth the money.
Gadget Guy
Reviewed in the United Kingdom on August 28, 2021
Avoid, just buy some sash or cutting in brushes instead.
Customer
Reviewed in the United States on January 10, 2020
I would hate to give one star for anything, but this one deserves it , first the idea sounds good but it does not function : your hand has to fully level so the shield can slide along the edg . Then if you want to add more paint to the brush you have to push the shield up and get paint on your hands .The quality of the brush bristles are not regular brush quality , they are super fine that can not apply any pressure on the brush . I ended up buying and using an edger brush from Lowe’s works nice.
Mama Bear
Reviewed in Canada on February 5, 2019
Horrible. Does not do a good job. Better off cutting without it
Ash
Reviewed in the United States on September 21, 2018
I did not find this product particularly helpful and ended up returning it. I did follow written and video instructions.The paint brush was abysmal. I’m not someone who generally buys the best quality brushes for my projects. I’ve often made use of brushes from the dollar store and this paint brush had nothing on those. It just didn’t hold a lot of paint and that combined with the design of the tool made the device a non-starter for me.Because the tool has to be set even with the tip of the brush bristles, you can’t push down on the bristles to even get a little more bang from the amount of paint the brush will hold. The tip of the brush just doesn’t hold enough paint. You can’t even paint a 6 inch long strip of wall space before needing to re-dip (which while easily done is a 3-step process, so not very effecent if you’re having to do it every 10seconds). The tool itself was of good quality material and the edging line was thin enough that the tool could have been effective with a really good quality brush (an additional $8 or more). Honestly though, if I think about spending over $20 total to get this product to work right, I’d rather spend less money and get better (and more effecent) results by purchasing a Shur-line type edger with refills.I’d originally tried this product over a traditional style edger in hopes it could help with painting molding itself (near the wall, floor, or ceiling line), but it was alomost completely useless for that purpose. To be fair, the manufacturer doesn’t claim it can be useful with painting molding. It only claims to be effective with painting the wall space leading up to the molding, but as mentioned above, it was ineffective there as well.
Customer
Reviewed in Canada on November 15, 2018
Just another cheap tool that does nothing. Total waste of money when