Your cart is empty.
Your cart is empty.Exterior Lifetime vinyl Shutter-Lok's are the perfect shutter screws to install your vinyl shutters.
Phoenix1776
Reviewed in the United States on January 11, 2025
These are way stronger than the ones sent from the manufacturer that broke. The color wasn’t a perfect match but it’s close enough to where no one but you it’s ever gonna notice. I’d definitely recommend this product and seller.
Briane Phibrick
Reviewed in Canada on September 4, 2024
The shutter Loks worked flawlessly. Just used a small mallet and softly pounded on the head and they secured the shutters to the side of the house in the original drilled holes.Had some high winds a few days later and shutters remained solidly fastened.
Okletsgo
Reviewed in Canada on July 3, 2024
Need these for a Project. Wish the quality were more in one package
Barry Whaling
Reviewed in the United States on December 17, 2024
I was very lucky that they match the color of the shutters. Works great; however her ea re a few tips when replacing. Remove the entire shutter. Make sure all all broken off pieces are removed. Drill out the hole just to make sure and check for depth. Cut the peg accordingly. Place the shutter and pens back in place and gently tap with a hammer to get it to seat properly. Shutter must be removed for the best result.
SCwoman
Reviewed in the United States on November 17, 2024
Shutter kept falling off my house. Then I ordered these after the Hurricane in SC which knocked it off again. Worked like a charm, so far.
Bartek
Reviewed in the United States on October 21, 2024
The Ekena Millwork Shutter Lok is an excellent choice for anyone looking to enhance their home’s exterior! This 12-count pack of black fasteners provides a sturdy and attractive solution for securing shutters.The installation process is straightforward, and the sleek black finish complements my shutters beautifully. I appreciate how these fasteners not only serve a practical purpose but also add to the overall aesthetic of my home.Overall, I highly recommend these shutter loks for anyone wanting to ensure their shutters are secure while enhancing their curb appeal!
RCI
Reviewed in the United States on October 12, 2024
Needed two of these for a shutter that was installed by the siding contractor. Contractor did not get the holes in the shutter and siding lined up very well and these were hard to install as the shaft bent too easy. I had to use an older used pin that was stiffer in one location as the new pin would just bend.These would be ok if the holes line up.
Onahunch
Reviewed in the United States on April 22, 2024
The Ekena Millwork LVSL0012BL Shutter Lok Fasteners are a great choice for securing exterior shutters with a clean, professional look. The black finish blends well with most shutters, and the durable plastic construction holds up against weather, ensuring long-lasting performance.Installation is quick and easy—they go in securely and hold shutters firmly in place without the need for complicated tools. They’re also sturdy enough to withstand wind and harsh conditions without loosening or breaking.With 12 in a pack, you get plenty of fasteners for multiple shutters, making this a reliable and cost-effective option for home improvement projects. Highly recommended!
Garrett
Reviewed in the United States on August 27, 2023
I got tired of looking at my sun bleached shutters on my house and decided to paint them. In order to do that I had to take them down. Vinyl shutter locks are disposable, sing use items. So, once I cut out the old ones they were useless. In order to put my shutters back up after I painted them, I needed new locks.Because I used a custom paint, I could not use pre-color locks. I needed the paintable ones. The paint adhered to the locks pretty well and the color blended seamlessly with the shutter's. I installed them in brick and siding and since they were replacements, the holes were already there. Putting them in siding was much easier and more forgiving. Putting them back on the brick and lining them up were a bit challenging, but I was able to make it happen. If you are installing the shutters up 15 feet high, like I was, You want to be able to make it as easy as possible. One thing that I learned to run a drill bit through the holes to clear the holes of anything loose in there, including broken pieces of the previous locks.I also recommend buying more locks than you need. I had a couple of them break because I was trying to hammer them into a hole that had pieces of the old lock. And I had to cut others because they were not seating properly and as I have mentioned, they are single use. The locks breaking had nothing to do with their construction. They are pretty solid. I was more my fault.One final thing to consider is do you want to paint them locks before you install them or after. I painted them before I installed them by using the box they came in as a holder. I understood that I would probably have to touch them up after I hammer them in, which I did, but wanted at least one coat on before I installed them.You could also wait until you instal them to paint them. It is pretty much six and one hand and a half dozen in the other. Its whatever your preference is. These are some very nice replacement locks that seem to be holding my newly painted shutters very securely to my house. I highly recommend them.
Reji
Reviewed in Canada on June 4, 2023
parfait pour remplacer ceux qui ont brisé(un peu plus long mais ca fait)
Cowgirl 4 ever
Reviewed in the United States on October 28, 2023
I purchased these for my MIL's shutters on the front of the house so that I could replace them after painting the front wall. I have to say, these things are tough. I could not get them to drive in all the way on the first time and I had even reamed the original hole out. Once I realized I wasn't going to be able to get in to go all the way in, I then had to get pliers to get it out. I then figured I better cut the next one off some to get it to go all the way in. Once I did, I tapped it in and it's really sturdy. Have to say, it was a learning experience, but it worked out great!
mike richard
Reviewed in Canada on September 24, 2021
Exactly the color I was looking for and used it to attach something to my PVC fence.
Customer
Reviewed in Canada on June 28, 2019
These provide an easy way to secure shutters and they look great! I bought these to replace a similar product when I painted my vinyl shutters. The colour was a great match for the shutters. I used a light mallet to hammer them into the existing 1/4” holes in my brick.I followed the advice of another review and purchased an extra couple of packages. As noted, if they aren’t lined up to the hole, they will bend and break. I broke 3 of them during install so I was glad I bought extra.
Recommended Products
