Your cart is empty.
Your cart is empty.Product Description
Features:
Efficient Use of Space
With a slim 17.5 in. width, this kegerator is able to fit in many spaces that standard sized units cannot, allowing for optimal user flexibility.
Digital Thermostat
The digital control panel allows you to easily adjust and monitor your temperature settings to ensure your beer is perfectly chilled. The ultra-low thermostat maintains temperatures as cold as 32 degrees without freezing the keg.
LED Bulb
The interior light is an impressive blue LED, illuminating your beverages in a flattering light
Integrated Door Lock
The built-in lock enables for your KC1000SS to remain completely secure, which also helps maintain the desired interior temperature
Keg Types & Capacities:
Sixth Barrel Keg
1/6 Barrel (42 Pints)
Cornelius Keg
1/6 Barrel (40 Pints)
Sixth Barrel Keg
1/6 Barrel (42 Pints)
Cornelius Keg
1/6 Barrel (40 Pints)
Beer Components Included:
- Stainless Steel Column Draft Tower
- Chrome Plated Brass Faucet
- Domestic “D” System Sankey Coupler
- Single Gauge Regulator
- 5 ft. of 3/16 in. I.D. NSF Approved Beer Line
- 4 ft. of 5/16 in. I.D. Vinyl Air Line
- 2 1/2 lb. Aluminum CO2 tank (Empty)
- Drip Tray
- Black Tap Handle
Since 2004 EdgeStar has been an industry leader in the specialty appliance field, developing products designed to elevate your lifestyle. We focus on providing products at a good value with an emphasis on quality construction and attentive customer support.
Dallas
Reviewed in the United States on September 14, 2024
Would be 5 stars but when it arrived the ground connector was a little loose causing the power to flicker. Simple fix and the problem is noted on the troubleshooting guide. Keeps beer cold can’t beat the price only works with 1/6 size kegs and cools down to 34 degrees.
Toni Jo Wagoner
Reviewed in the United States on September 21, 2022
We ordered this product so that we could have fresh, cold beer just like our favorite bar. It was easy to put together and easy to get the temperature set to begin the cooling process. We had the temp set at 32 but the readout kept showing it was 37°. My husband called the company and she sent us another electrical control board. This time it would cool to 34. We decided it was time to drink beer…but the beer was not cold. A refrigerator thermometer inside the unit showed 30° while the unit showed 34°. We also used a thermometer in a freshly poured glass of beer. The temperature in the beer would not go below 40°. The company says, after giving them this info, that the unit is working properly. It is too late to return it so I guess we are stuck with it! That was one expensive mistake!
Jason T Neton
Reviewed in the United States on September 15, 2021
I was skeptical at first as I had read some complaints that Edgestar systems didn't cool that well and that folks could not get the beer down to temps like 37-38. I have had no issue with that, and my unit sits in a rather warm garage. I actually thought that getting a unit that would hold a full keg was more wise but given they were about $150 more, and also didn't have digital temp control (or the cool blue lights) I decided to take a gamble and try this. It has been about 3 weeks, and no complaints at all! The beer pours wonderfully, and I love the unit.
Lolo
Reviewed in the United States on September 11, 2020
I’m giving this one star based on our inability to use this . I bought for my husband as a gift in May , and no distributor in our area has the 1/6 keg to use in this .... I patiently waited all this time to hopefully get some beer and try it out , but looks like I wasted lots of money , since I can’t return it .UPDATE!! The seller was kind enough to take this back , since we were unable to get a keg to fit in it .... we will be shopping for a new one soon !
Matt
Reviewed in the United States on July 23, 2020
Keeps the beer so cold when set on 32. I'm just sad I never got a kegerator sooner, the 1/6 keg lasts almost a month for me and finding a place to fill the 2.5lb c02 tank was a little hard. Most places want you to join an exchange program you have to buy into with a deposit. Having the supplied tank saved me another 80 bucks or so not having to do the tank exchange. Highly recommend even if it's just for the street cred! People flip when they find out you have an ice cold keg at home, especially if you filled it with something decent.
IAN
Reviewed in the United States on May 8, 2019
Recently purchased this unit after doing some serious homework on the competition. This unit has a digital thermostat, an internal fan and a completely stainless tower / faucet from the factory which is unheard of at this price range!I wanted a small compact unit and could not be happier with my decision. The added bonus is that this kegerator will accept a 5 gallon carboy if you set it up on the shelf and support the other side hanging off. I could not find a solid answer anywhere online. Posted an image to prove it, i was thrilled. You will need to run a blow off tube because an airlock will not fit above. I am also able to fit a standard 5 gal corny keg with 5lb gas bottle without an issue. I upgraded to an Intertap SS flow control faucet and shank right from the start, however the standard setup worked perfectly when i initially tested it. I also went a 10ft beer line, did not try the included 5 footer. The temperature controller can get stuck as mentioned in many reviews, however you can cycle the F/C button to get the correct current temp which is easy. I have found that setting and forgetting has worked out perfectly for me. The insulation in the tower is not the greatest as it restricts airflow, however that is an easy fix with a bit of tinkering. The regulator has been holding pressure correctly for me so far. I may try to figure out a way to keep the tower colder to prevent foam on the first pour. Overall, very pleased with the purchase.
Keith T Stratton
Reviewed in the United States on January 21, 2018
This product is advertised as having capacity for a single Sixth Barrel Keg or Cornelius Keg, but be advised that many craft breweries now regularly use disposable alternatives such as Rehrig's "PubKegs" for their Sixth Barrel Kegs as opposed to the traditional stainless steel solution. Whereas a stainless steel Sixth Barrel Keg is about 9¼'' in diameter, a PubKeg is about 11'' in diameter. I've purchased kegs from several different craft breweries in the NY/NJ area over the last two years and all Sixth Barrel Kegs have been PubKegs. Although you can fit a PubKeg into this kegerator, it's a very tight fit and the door will pop open unless you use the door lock (I've verified that the unit is leveled, so that's not the issue). Luckily the door gasket appears to be fully sealed, even though the top of the door protrudes out slightly.I'm enjoying the kegerator so far, but I'm worried about the unit's longevity considering the door will only remain shut when the door lock is enabled, and it's unfortunate that EdgeStar does not communicate the exact dimensions of compatible Sixth Barrel Kegs more clearly. For craft beer enthusiasts looking to purchase this keg, I'd recommend another kegerator with greater depth to comfortably accommodate any Sixth Barrel Kegs.
Derek
Reviewed in the United States on December 21, 2016
I bought this ahead of a Christmas party we were hosting at our home, mainly because I always wanted one and it seemed like a good excuse to buy one, but also who doesn't want to pour their own pint? It was a great conversation piece at the party and such a huge hit that at least two of my friends are getting their own as Christmas gifts from their wives. It took about 10 minutes to put this together. Word of advice, after connecting the keg and CO2, let it sit for a few hours. The first few pours will be foamy but it will subside as it beer settles and the CO2 regulates. I recommend buying a stainless drip tray and also, buying a branded tap handle is also a nice touch but the tray/tap they come with do the job.
Recommended Products
$1,739.00
$ 99 .00 $99.00
$758.84
$ 99 .00 $99.00