Your cart is empty.
Your cart is empty.Product Description
Compatible with:
2008-2010 Fit for Chrysler 300 2.7L,2008-2010 Fit for Chrysler 300 3.5L,2011 Fit for Chrysler 300 3.6L,2008-2011 Fit for Chrysler 300 5.7L,2008-2010 Fit for Chrysler 300 6.1L,2008-2010 Fit for Chrysler Town & Country 3.3L,2011-2015 Fit for Chrysler Town & Country 3.6L(More models can be found in the Product Description so that you can know whether it is suitable for your vehicle)
FCC ID: M3N5WY783X,IYZ-C01C,GQ4-53T
How to replace battery?
Take out the key and use the tip of a very small screwdriver as a tool to open the back case, replace the same battery carefully. You can use a clean cloth to clean the battery in case some dushes existed
Battery Model: CR2032
Buttons: 3
Frequency: 433 MHz
Circuit Board Inside
Connect our key fob programmer to your vehicle and install it in less than 10 minutes without the help of a professional car key programmer
Wear Resistant Key Fob Design
One key fob has all the necessary buttons that are most important for regular use: lock, unlock, and panic buttons
360°Scientific Design
100% same function and design as the original
Uncarved Key Blade
Fine workmanship, providing a perfectly fitted replacement key
Eduardo
Reviewed in the United States on July 10, 2024
works great, i programmed the key with a napa scan tool.
Travis
Reviewed in Canada on December 10, 2024
Buttons broke inside already
Brenda Shepard
Reviewed in the United States on November 7, 2024
Way cheaper than buying locally. Easy to setup, works great
Erle Snobel
Reviewed in Canada on October 23, 2024
Had to get programmed but was a fraction of the cost the programmer wanted for a new one.
Customer
Reviewed in the United States on December 10, 2021
We were able to find a local locksmith who programmed this key fob for a reasonable price! It works great as our backup key fob since our vehicle only came with one original. We had ordered one before and it lasted 7 years so well worth the money!
Gerald B
Reviewed in the United States on April 5, 2021
This review is for those who are having problems with their key fob not those who plan to program and cut the included key. I had my original key fobs but both were messing up. I could just rest my finger on the fob without pushing the buttons or very often while the fob was in my pocket it would come in contact with my pants and unlock my truck and even roll my windows down. As long as I was in range it was quite often doing these things. I don’t live in the safest of neighborhoods so a unlocked truck and especially one that’s windows are down would at least be robbed and not long would it have been stolen. So I had a serious issue. That being said I bought this fob to rob parts from it to fix this problem. It was perfect for this purpose. I kept the hard case of my old because it said dodge on the back of it and this one does not. I kept my computer board from my old replacing the touch sensor cups with the ones from this case which was the problem with my old computer board in my fob. This fob has the cups on a sticker so I was able to peel off the new board and apply on my old one with ease. I used the new rubber touch part from this fob and presto. Brand new fob in my old case which nicely says Dodge. For this purpose this is the fob to get without a doubt. I have no idea about programming this fob to the truck but I will say it is almost identical to my factory fob from dodge. I’m buying another to fix my second fob as it is doing the same thing as the one I fixed. Must be a thing for these fobs as both mine eventually started messing up. Highly recommended to fix old fobs
James D
Reviewed in the United States on May 2, 2020
One programed perfect (locks, Ignition-immobilizer, ect), one only programed Ignition-immobilizer. So buyer beware. I updated my rating more so for the vendor as they did refund my money for the one that did not program. Nice to see them make it right.
ronky
Reviewed in the United States on September 25, 2019
Initially I was hoping to do the 2-key programming trick but it didn't work on my 2010 Dodge Journey. I ended up swapping the original chips into these FOBs; this required peeling off the tape that held the metal platters on the sensor off the new chips, and tapping them back onto the original ones. Put the old chips on the new FOB body (I tried keeping the original backing with the Dodge logo but it would not close) and all buttons work fine. I was able to turn on the car, but the keys seem a bit loose in the ignition. Also, I'm using the original key (the insert key to manually unlock the door) and it also seems to just barely stay in place. For now I'd say this is good enough due to the fact that all features are working in this replacement.
Craig Schepens
Reviewed in Canada on May 15, 2019
Great price on these replacement fobs was able to have them programmed and cut at the dealer was still cheaper than buying OE
Samantha Woodruff
Reviewed in the United States on October 3, 2019
These are great! I was unsure they would work for my van because we have a 2016 Grand Caravan and that was outside the year range listed. But my husband is a locksmith and we compared part numbers, hoped it would work and figured we couldn't beat the price to give it a shot since we both needed new fobs. Took a little extra effort on his part figuring out the programming since we only had one original fob left but he got it working and we are both really pleased! Great deal!!
John Herron
Reviewed in the United States on July 24, 2018
These could not have worked out better for me. I was able to cut the keys for 2 bucks at a local hardware store. I called around and had the keys programmed for 60 bucks at a local dealership. I was crossing my fingers that they were able to be programmed and it all worked out. The dealership wanted alot more if I bought their keys and had them programmed. Buying these saved me a tremendous amount of money. I am very pleased.----> Eleven months later....They stopped working. These left me and my family stranded. At first I thought it was the batteries. Replaced them and still didn't work. Went back to the dealership to reprogram and the van kept saying "bad key". I just chalked it up as a loss and paid the "stealership" two bills for their key. I tried to save the money and it just didn't work out for me this time.
Michael P Jessome
Reviewed in Canada on September 11, 2017
The battery needed replacing within a week.....otherwise all is good...
Recommended Products
$45.99
$ 23 .99 $23.99