Your cart is empty.
Your cart is empty.4.5 out of 5 stars
- #15,076 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden)
- #48 in Garden Edging
Heavy Duty EasyFlex No-Dig Landscape Edging has a thicker, taller (1.7 inch) wall compared to regular No-Dig Edgings to create a clean line between your landscaping and grass or weeds. The heavy duty recycled plastic is ideal to keep ground cover materials in your garden beds, including river rock, lava rock, pebbles, wood mulch, pine needles, and more. Installing EasyFlex Landscape Edging is as easy as clearing the area of debris and loose dirt, laying the edging along the desired shape and hammering the anchoring spikes (included) through the tab. Easily cut the coil with garden shears or utility scissors to use in multiple garden beds. Use No-Dig Edging with weed fabric to help prevent unwanted weeds and grass in flower beds. The spikes easily pierce through weed fabric and help secure the barrier. Recycled plastic No-Dig Edging is durable, yet flexible enough to give a clean edge to any shape garden or create tight circles around trees. The patented No-Dig L-shaped design eliminates damage from digging into tree and plant roots. Kit includes (1) 100-foot coil of landscape edging and (40) 8 in. spiral spikes. This Heavy Duty No-Dig Landscape Edging kit can complete a 100 linear foot installation.
Kresziel
Reviewed in Canada on September 4, 2024
Very easy to install and very durable. Suits my design ideas perfectly!
Kresziel
Reviewed in Canada on September 4, 2024
Very easy to install and very durable. Suits my design ideas perfectly!
Patricia S.
Reviewed in the United States on June 19, 2024
Like other reviewers, I did find that within a couple days after installation it did get wavy. I used an 8" pin in every other hole and in some areas in every hole, and it still got wavy. I am in Florida, so heat may be a factor. For my purposes, I don't care if it is wavy- I just needed something to protect my landscape fabric when I use the weed-whacker. It works fine for that purpose, so far. It has been installed for a few months now and is very sturdy. Easy to install.
Patricia S.
Reviewed in the United States on June 19, 2024
Like other reviewers, I did find that within a couple days after installation it did get wavy. I used an 8" pin in every other hole and in some areas in every hole, and it still got wavy. I am in Florida, so heat may be a factor. For my purposes, I don't care if it is wavy- I just needed something to protect my landscape fabric when I use the weed-whacker. It works fine for that purpose, so far. It has been installed for a few months now and is very sturdy. Easy to install.
Mrs. B. W. Hardegree
Reviewed in the United States on December 13, 2024
I have used this product for many years. I have some beds that have been outlined with it for more then 5 years and it is still holding up. So easy to use. I do spray round up exactly where I am going to lay it and then don't even have to dig up grass. Lay it down immediately and weed eat right up to it. Easy!
Mrs. B. W. Hardegree
Reviewed in the United States on December 13, 2024
I have used this product for many years. I have some beds that have been outlined with it for more then 5 years and it is still holding up. So easy to use. I do spray round up exactly where I am going to lay it and then don't even have to dig up grass. Lay it down immediately and weed eat right up to it. Easy!
Paulina
Reviewed in Mexico on September 18, 2023
Práctico y fácil de instalar.
Paulina
Reviewed in Mexico on September 18, 2023
Práctico y fácil de instalar.
TM
Reviewed in Canada on June 2, 2023
It is very easy to install! I like the sturdiness if the material. As someone else pointed out- best to unwind the coil before use to lose some of the memory from the packaging. Could use a few more spikes. All in all, I would but again if needed.
TM
Reviewed in Canada on June 2, 2023
It is very easy to install! I like the sturdiness if the material. As someone else pointed out- best to unwind the coil before use to lose some of the memory from the packaging. Could use a few more spikes. All in all, I would but again if needed.
Y.B.
Reviewed in the United States on July 17, 2022
We used this to edge around our back yard lawn and fill the tree area with playground mulch to prevent weed growth. This edging works quite well! It's pretty strong, and is pretty straight if you install it correctly. Here are some installation tips that will help:1. Unroll the edging and make sure it's not twisted. Let sit in the sun for ~30 minutes so it can warm up and expand.2. Use spikes as needed BUT DO NOT hammer the spikes in as if it was a nail. As others have mentioned, hammer only until the spike touches the edging. Hammering it further is not necessary, and will cause the edging to bend / warp right away. So don't do it.3. Use landscape staples in between spikes. Same as spikes, don't hammer these in too hard so as to not warp and bend the edging.With these 3 tips not only will your installation be easier, but the edging will look straight and have enough room to expand / contract with the weather. Treat it as a "floating floor" where you need to leave a gap between the spike and the ground so that the edging can "float" over time as it expands and contracts and remain looking straight.We ordered 2x more 100ft rolls to do the rest of our landscaping!
Y.B.
Reviewed in the United States on July 17, 2022
We used this to edge around our back yard lawn and fill the tree area with playground mulch to prevent weed growth. This edging works quite well! It's pretty strong, and is pretty straight if you install it correctly. Here are some installation tips that will help:1. Unroll the edging and make sure it's not twisted. Let sit in the sun for ~30 minutes so it can warm up and expand.2. Use spikes as needed BUT DO NOT hammer the spikes in as if it was a nail. As others have mentioned, hammer only until the spike touches the edging. Hammering it further is not necessary, and will cause the edging to bend / warp right away. So don't do it.3. Use landscape staples in between spikes. Same as spikes, don't hammer these in too hard so as to not warp and bend the edging.With these 3 tips not only will your installation be easier, but the edging will look straight and have enough room to expand / contract with the weather. Treat it as a "floating floor" where you need to leave a gap between the spike and the ground so that the edging can "float" over time as it expands and contracts and remain looking straight.We ordered 2x more 100ft rolls to do the rest of our landscaping!
C. Sunshine
Reviewed in Canada on May 15, 2022
It is really easy to use. Very durable and just malleable enough to do curves. I only give it 4 stars because they don't provide enough stakes out of the box.
C. Sunshine
Reviewed in Canada on May 15, 2022
It is really easy to use. Very durable and just malleable enough to do curves. I only give it 4 stars because they don't provide enough stakes out of the box.
NB
Reviewed in Australia on November 24, 2021
All good. Just as expected from description.
NB
Reviewed in Australia on November 24, 2021
All good. Just as expected from description.
Blue Leaves
Reviewed in the United States on June 3, 2020
I love this edging! To clarify, I do not use it as “no dig” edging. That was never my purpose. I dig a low edge for easy mowing purposes and to keep mulch in the bed. (I also think it looks more professional.) I then use this to line the edge. It helps keep the weeds at bay more effectively than just digging and the mulch seems to stay in the bed better as well. It’s also easy to mow around. Perfect!I learned about it through some helpful videos by pro landscapers. I had purchased other edging, but it was much more of a hassle.The only negatives to me:1) It is a large, fairly heavy roll, so you may need help moving it around. I’m a fairly strong, middle-age female, but I ended up measuring how much I needed and cutting off that length until the roll got smaller and more manageable. (The box arrived with a “heavy” warning label on it).2) The other thing is that you have to purchase the stakes separately.I thought those two things are easy to work around for the quality and value of this product, which is why I give it 5 stars. It is fairly easy to install, you can cut to length easily, it’s flexible and yet durable. It lays against the curved edges of my dug beds great and stakes in securely. Overall, the end result is exactly what I want.TIP: the ends can tend to curve in a bit since it’s rolled, however, I found that bending it back in the opposite direction for a few seconds straightened it nicely. I also didn’t stake it right on the end, but one or two holes down, which seemed to hold it straight better. Once the mulch is in the bed, that helps it keep shape as well.
Blue Leaves
Reviewed in the United States on June 3, 2020
I love this edging! To clarify, I do not use it as “no dig” edging. That was never my purpose. I dig a low edge for easy mowing purposes and to keep mulch in the bed. (I also think it looks more professional.) I then use this to line the edge. It helps keep the weeds at bay more effectively than just digging and the mulch seems to stay in the bed better as well. It’s also easy to mow around. Perfect!I learned about it through some helpful videos by pro landscapers. I had purchased other edging, but it was much more of a hassle.The only negatives to me:1) It is a large, fairly heavy roll, so you may need help moving it around. I’m a fairly strong, middle-age female, but I ended up measuring how much I needed and cutting off that length until the roll got smaller and more manageable. (The box arrived with a “heavy” warning label on it).2) The other thing is that you have to purchase the stakes separately.I thought those two things are easy to work around for the quality and value of this product, which is why I give it 5 stars. It is fairly easy to install, you can cut to length easily, it’s flexible and yet durable. It lays against the curved edges of my dug beds great and stakes in securely. Overall, the end result is exactly what I want.TIP: the ends can tend to curve in a bit since it’s rolled, however, I found that bending it back in the opposite direction for a few seconds straightened it nicely. I also didn’t stake it right on the end, but one or two holes down, which seemed to hold it straight better. Once the mulch is in the bed, that helps it keep shape as well.
Diane Kistner
Reviewed in the United States on September 3, 2019
First of all, it is very easy to install if you have enough stakes and if you unroll the whole thing and roughly lay it on the ground first. The very first thing I did was run my lawnmower around the area to be sure my curves aren't too tight for the mower, then went from there.My heavy-duty edging came with 40 stakes. I also ordered a second bag of 50 to be sure I have plenty of stakes, but they aren't here yet. Because I will be plugging in liriope sprigs every 8" on the inside edge of the bed, I decided to rough-stake everything down first to be sure I like it; also because it's so hot outside, and I'm taking the advice of those who advised not to install this until it's cool to avoid breakage on cooling if it's stretched too taut when hot.I followed this strategy, using the holes in the tabs to count: STAKE one two three STAKE one two three STAKE one two three. Or, in my case until my new stakes come, STAKE one two three SKIP one two three STAKE one two three SKIP one two three. The distance between two stakes using this skip-three-holes method is 16" so that means the middle skipped hole is 8" and that will help me space the liriope. Skipping where I'll put in more stakes allows me to get the whole 100 feet rough-staked down so I can live with it a while and be sure it's what I want. I pounded the stakes in just far enough to hold the edging roughly in place. Counting it out this way ensures I'll have extra evenly spaced holes if I need to do a tight curve (STAKE one STAKE one STAKE) if needed. I'll go around it with an edging tool to score the edge of the grass to remove when I've got it like I want it, then use wet cardboard underneath and on over the grassed area in what will be my permaculture beds when I'm ready to stake it all down. Then I'll add lots of woodchips on top of the cardboard. I think it's going to work nicely.The only reason I got the heavy-duty edging is because other reviewers said the heavy-duty holds up better in the heat, but mainly because it came with more stakes. I'll have to set my lawnmower up higher with this edging because it's about a quarter inch taller than the other edging I've used in the past. But because I was careful to mow first to ensure leisurely curves the mower can handle, once the liriope grows up and out over the edging, I think it won't be an issue.
Diane Kistner
Reviewed in the United States on September 3, 2019
First of all, it is very easy to install if you have enough stakes and if you unroll the whole thing and roughly lay it on the ground first. The very first thing I did was run my lawnmower around the area to be sure my curves aren't too tight for the mower, then went from there.My heavy-duty edging came with 40 stakes. I also ordered a second bag of 50 to be sure I have plenty of stakes, but they aren't here yet. Because I will be plugging in liriope sprigs every 8" on the inside edge of the bed, I decided to rough-stake everything down first to be sure I like it; also because it's so hot outside, and I'm taking the advice of those who advised not to install this until it's cool to avoid breakage on cooling if it's stretched too taut when hot.I followed this strategy, using the holes in the tabs to count: STAKE one two three STAKE one two three STAKE one two three. Or, in my case until my new stakes come, STAKE one two three SKIP one two three STAKE one two three SKIP one two three. The distance between two stakes using this skip-three-holes method is 16" so that means the middle skipped hole is 8" and that will help me space the liriope. Skipping where I'll put in more stakes allows me to get the whole 100 feet rough-staked down so I can live with it a while and be sure it's what I want. I pounded the stakes in just far enough to hold the edging roughly in place. Counting it out this way ensures I'll have extra evenly spaced holes if I need to do a tight curve (STAKE one STAKE one STAKE) if needed. I'll go around it with an edging tool to score the edge of the grass to remove when I've got it like I want it, then use wet cardboard underneath and on over the grassed area in what will be my permaculture beds when I'm ready to stake it all down. Then I'll add lots of woodchips on top of the cardboard. I think it's going to work nicely.The only reason I got the heavy-duty edging is because other reviewers said the heavy-duty holds up better in the heat, but mainly because it came with more stakes. I'll have to set my lawnmower up higher with this edging because it's about a quarter inch taller than the other edging I've used in the past. But because I was careful to mow first to ensure leisurely curves the mower can handle, once the liriope grows up and out over the edging, I think it won't be an issue.
Recommended Products
