Your cart is empty.
Your cart is empty.Product Description
Eastwood Rust Encapsulator - Black
Thoroughly Tested and Proven Durability
Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective protection from rust yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.
It fills tiny pin-holes and surface irregularities and is compatible with lacquer, enamel, and urethane topcoats.
- One 15 oz. net wt. aerosol covers about 10 sq. ft.
- Contains no isocyanates.
- The finish is 2%-10% Gloss Level
Made in the USA.
Formulated with Superior Corrosion Resistance
- Heavily tested with 500 hours in a Salt Spray Chamber.
- Epoxy-fortified for better adhesion and topcoat compatibility
Easy Application!
- Roll on, Brush on, Spray (with a paint gun) or use our Aerosol.
- Requires minimal prep required! Simply use a wire brush to remove loose rust, scale and paint. Remove dust, grease and oil deposits then apply the Rust Encapsulator.
Tons of Protection!
Protect against future rust and prevent corrosion from spreading.
Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas.
- UV Resistant
- Heat Resistant to 400 Degrees Fahrenheit
Available in Multiple Sizes
Eastwood Rust Encapsulator - Black is available in multiple sizes:
- 15 oz Aerosol
- Quart
- Gallon
My 67
Reviewed in the United States on January 1, 2025
Have used this product on a few different things and so far has worked very well. It dries faster than I thought it would, a little tacky when you are putting it on but works well even with a sponge brush. Not going to complain, it's a little pricey but this stuff actually works.
Christopher F.
Reviewed in the United States on September 14, 2024
Works well with proper application. The chassis looks great , but longevity ? Buy a cheap HVLP gun to apply. Clean up is a little tough. It uses humidity to cure out so cover up yourself, the object , the neighbors cat etc.
Eric
Reviewed in the United States on March 31, 2024
Easy to use, time will tell with exposure to water how well it counteracts corrosion, seems quite good for adhesion and coverage
Mark A Scheuer
Reviewed in the United States on December 7, 2024
Worked out ok. Finish was not what I had expected. A little flat in color shine.
Mr.R
Reviewed in the United States on December 5, 2024
A little thin, need at least two coats
Phil's TT
Reviewed in the United States on December 16, 2024
This product cove great.
Jay B.
Reviewed in the United States on December 14, 2024
I am using Eastwood's Rust Encapsulator to coat surface rust I can't completely remove inside a classic car door skin to stop/slow the expansion of the rust. So far, it looks like its going to help. Easy to apply. One word of caution -- the product separates into a heavy goop at the bottom of the can, with black liquid on top. Its is really difficult to mix by hand; fortunately, I have a paint shaker, which did a great job mixing the Encapsulator into a nice homogenous blend.
Blee
Reviewed in the United States on October 29, 2024
Covered the runs on the inside of my husband's old truck great. Covered great in one coat.
Recommended Products