Your cart is empty.
Your cart is empty. This USB to TTL/UART data cable is very suitable for electronic engineering development or burning various firmware. Compared with other CP2102 serial adapters, this UART adapter uses CP2102N chip. CP2102N is an upgraded version of CP2102 chip, the maximum transmission speed can reach 3Mbps, which is equivalent to FTDI FT232RL.
Specification:
Model: SH-U09BL
Main chip: Silicon Labs CP2102N
Pin Definition: RXD,TXD,GND,VCC,CTS,RTS
Output VCC: 5V
TTL Logic Level: 3.3V
USB interface: 2.0
The maximum speed: 3Mbps
Length: 1.2M/4 Feet
Application:
Support EEPROM, Vendor ID re-write, unbrick routers ,program ESP8266 module, interface to GPS modules, flash firmware on hard drive, update transmitter, interface to set top box and other compatible UART interface devices
Packing list:
1 X SH-U09BL USB to TTL Cable
1 X User Manual
WARRANTY:
DSD TECH offers a 1-year warranty and lifetime technical support for this USB to TTL Serial Cable。If you meet any question, Please contact us, We will fix your issue within 24 hours.
Client d'
Reviewed in France on January 9, 2025
le câble servait à un devoir pour mon fils
Glitchvid
Reviewed in the United States on January 30, 2025
Used this to interface with the serial headers on a Seagate HDD, worked perfectly.
ED
Reviewed in the United States on June 25, 2024
First, what serial device comes with printed color instructions on how to use a terminal? I got this to add the the big collection of serial converters one needs to talk to all sorts of IC modules. Hint: there are 6 different serial chips/converters out there, and you need most of them. If you find a device to connect and you just have to give up because no baud rare works? Nah, switch to a different converter and there like a 90% chance it will just work. But the packaging with this one was very impressive, so much so I had to get online and write a comment on it.If you're wondering, here are the other converters I've had to switch between over the years (and a can bus one). Not because they are bad, it's just it's a hit or miss. Also, don't believe those "throw away all ur converters" all-in-ones, they are just one of the chips i link to below (and a lot cheaper):https://amzn.to/45JWosC, https://amzn.to/45N6nNO, https://amzn.to/3VUVvtQ, https://amzn.to/4cifhVPLastly, if I had any negative, it would be that more converters need GPIO pins to flip bits and power cycle things. My crowd supply version works very well for that.
Mel M.
Reviewed in the United States on May 4, 2024
Overall no issue. However, when first received the product, the Tx and Rx wires were label incorrectly. I has to swap the two.
y.d
Reviewed in Japan on December 26, 2024
aruba AP-305というアクセスポイントで、コンソールポートが普段使用しているものと異なる端子で困っていました。調べるうちに左からGRD・RXD・TXDの順に繋げると使用できることが分かり、ダメ元で本商品を購入しました。恐る恐るつなげてみたところTeratermへ見慣れたプロンプトが現れ、入出力問題なく使用できました。
Jack
Reviewed in Belgium on November 15, 2024
I have tested it in Linux and works very nice
R&H
Reviewed in the United States on September 11, 2023
I've found through experience that the CP2102 chipset and drivers (linux, mac, and windows) are the most reliable USB-to-TTL adapters for work. These cables are well built, and the labeled leads are quite nice. One of the cables I ordered was mislabeled. I'll update to 5 stars when I receive the correct replacement.
Rich C
Reviewed in the United States on August 24, 2023
One of the best USB to serial TTL cables.Very simple use with PUTTY software.
MasterTacoChief
Reviewed in the United States on February 27, 2023
I use these at work, and I've purchased a lot of them now too. These always work, have never broken, and the labels on the connectors are great so you don't have to remember what color is what signal. A couple more dollars than some other options, but definitely worth it.
Cousin Larry Appleton
Reviewed in the United States on December 12, 2023
Definitely was much higher quality crafted than 99% of the rest of the TTL cables around. However I wasted so much time it was not even funny to the point I returned it. The cable Leeds color scheme does not match the documentation or websites documentation. As in the colors are completely different and labeling doesn't match whatsoever. Therefore you're left trying to try combinations of gd, tx, rx, Hope the right lead gets on the right pin. Not cool, at all!
"Matt_from_Charlotte"
Reviewed in the United States on August 29, 2022
Replacement for an older/slower converter, with this you have options by building your own rs232 interface. Works great!
taldegh
Reviewed in Italy on September 15, 2021
Qualcosa mi è andato storto nell'aggiornamento firmware del router Netgear WNR3500v2, in particolare volevo installare il firmware originale su uno custom, purtroppo alla fine dell'operazione il router non dava segni di vita ovvero si accendeva solo la spia "power" col colore arancione. A quel punto o lo buttavo o provavo di ripristinare il firmware in qualche modo. Per ripristinare il firmware originale o acquistato questo cavo seriale dotato già (in un dischetto allegato) del driver per Windows 10. Una volta riconosciuta la porta com è sufficiente seguire una procedura dettagliata passo passo disponibile online e il gioco è fatto ovvero il firmware è correttamente ripristinato e il router torna a svolgere il suo servizio. Consiglio l'acquisto in particolare agli smanettoni (come me), perché la procedura di ripristino è comunque piuttosto laboriosa.
WillCW
Reviewed in the United Kingdom on November 6, 2020
From what the pictures showed. I had expectations that this would be a cheap cable. When I received it, it didn't feel like that. The cable felt strong and sturdy and the head which houses the main components is well sealed and doesn't feel like breaking any time soon. It seems like some thought has gone into the product as I can see that the pin cables are labeled too. Like someone said, although this is 5V VCC, it does not tell you on the cable and instead only on the manual. I think it's worth noting on the cable this, just in case you loose the box it came in. I would consider the flat cable more beneficial as it prevents the cable from being tangled up. The pins are separated, which I think is better as some boards place the pins in different locations and this removes the need to use an extension. The length of the individual pin cables are around 50mm long, which I think is the perfect length, allowing you reach the pins you need, without it being too long.I don't really want to repeat what the other review said, but I have to emphasize that the labelling is really useful especially since the red cable isn't normally what you'd expect it to be. I have used it once, and it has worked fine, however, it hasn't gotten much use right now so can't write a full review right now. If any problems arise, then I'll update this, but right now, I am happy with this product.TTL cables are versatile and can be used for debugging and programming. Reading outputs is a popular use for them. Occasionally you can have bootloader problems, and this can help identify them and potentially fix the problems before yo attach them to your PCB.(The cable arrived in a box, so you can be sure that the cable is safe.)
Recommended Products
