So easy to tell when plants need more water!! Mostly use with houseplants, but works well outside in flower bed, too! does not check ph, but price is right for a watering monitor.

Essais fait dans différents pots avec les deux appareils. Mesures identiques et conforme à l'humidité de la terre.A voir dans le temps

These do an amazingly good job of measuring soil moisture levels and no batteries needed. They work so well I've given these as gifts to many of my friends and family. Keeps me having to answer questions like how often do I need to water my plants.

I can’t even express my relief these meters brought. No more guessing! The top may be dry but the soil is moist down by the roots! I was over watering for sure. So easy, just stick the probe in to get an instant reading

They are good sized, which makes them easy to find. I use them on all my plants and it helps me give great, custom care in terms of watering a variety of plants. Works to measure moisture on very tiny to oversized pots. Came with two, so that added value to the purchase. Durable and versatile too!

I love this gadget! Inexpensive, you get TWO in a package, perfect size, and easy to use! The reading is instantaneous, so I can check my numerous plants (indoor & outdoor) within minutes! No more over-watering -- no guesswork. My plants are much "happier." Thank you!

This is my third purchase of moisture meters for my potted plants and I'm hoping that these two last longer than the last two I bought. These appear to work fine right now and they look just like the others I've owned, although the brand name is different.But, I think they're all manufactured in the same couple of factories in China.I think the key to keeping them working longer is to treat them gently. Protect them from the elements (don't leave outside in the hot sun or the rain) and, also, when you stick them into a pot and pull them out, don't grasp by the plastic casing--instead, push it into the pot and pull it out by holding the metal stem.On the back, it also says, "Clean tip after use," which I've never done in the past, so I'll try doing that, too.

I tend to either overwater or underwater my flowers. I bought these water moisture meters to help solve that issue and so far my plants seem to be thriving. I like the large head and easy to read scale. You insert the probe into the soil for a few inches (close to the roots) and it almost immediately gives you a moisture reading. I thought I would just leave one in each pot but that is not the case. You only keep the meter in the soil until you get a reading, then you pull it out. The meter immediately resets so you can check another plant. The 7" long strong metal rod is long enough to reach close to your roots. The best part - no batteries needed.

Mon cadeau a plu

I'm appalled at the negative reviews from people that can't follow simple instructions. Stick the probe in, wait a couple of seconds for the readings, REMOVE IT from the soil and clean it up with a towel.I'm praying these people will never have to take a dog's temperature as the poor creatures might end up with a thermometer stuck up their rectums for the rest of their lives.

Fungerade helt perfekt. Mycket nöjd med både pris och produkt. Rekommenderas!

I would have never thought that growing a lawn could be so frustrating, and part of that frustration has come from purchasing garden tools that are junk. In my quest to find the perfect sprinkler and the perfect water meter, two tools that go hand-in-hand, I've tried a considerable segment of the market with a very small amount of success.My thought on ordering a two pack of water meters was to have a back up for when the first one broke. And it will break. I know this from experience. I was hoping to get more than one use out of it, though.My last meter lasted about 2 years. That was a new record. My experience with these meters didn't start off well, as I received an empty package on the first go. Amazon was quick to send a replacement. Great.The replacement arrived, and I was excited to see the moisture content of my soil because, well, my last meter had broken. I live in Phoenix. The soil is a bit rocky. I was gentle when I inserted the probe. I got a reading (needs water). Great. I pulled the probe out of the ground, and the sensor remained in the ground. Hmm. One use, one broken probe. Good thing it's a two-pack.I need to test about six different spots because, quite frankly, I haven't found a decent sprinkler head yet, either. So I'm already ordering a backup. Not a good sign.I've now gone through seven probes in the five years that I've been trying to grow a lawn. I think it's time to shell out some money to get a decent one.

As they come from the factory, these (at least the two I got) seem to only be good for desert plants (cacti & succulents) that need to be totally bone dry before watering.First let me debunk a couple of reviews I read that said these were 'crap' because when the customer put them in a glass of water they read 'dry'. They are NOT made to read the presence of PURE water! They only take a reading on water that has impurities. I got some clean pure water, stuck the probe in it and it read 'dry'. I then boiled the water and made a cup of strong black coffee, and a cup of strong black 'Earl Gray' tea;stuck the probe in each one of those and the meter pegged over to a 10++ reading. If you get a pot of good soil, and soak it well with water until it's dripping out of the bottom of the pot (waiting until all water dripping stops first) and then stick it in the dirt, it also reads 10++. Makes sense, the water in the pot is also impure due to the soil.OK, so now we know what these are designed to read, and how the work. Now I'll discuss what they are good for as they come, new from the factory; they are VERY sensitive to moisture. Almost all cacti & succulents need to have the soil get bone dry between waterings. For those types of plants, you really don't need these meters so long as you are willing to invest in a large supply of disposable tongue depressors or pop-sickle sticks. The way to check the dirt in your cacti is to insert the dry stick; if it comes out even slightly discolored (indicating some moisture in the soil has impregnated into the wood) then you need to withhold water longer. Only when the stick comes out just as dry and the same color as before you inserted it, do you add water to your cacti (and even then, it's usually best to withhold water an additional 2 weeks in most climates except for low desert southern Arizona where it's 110+ degrees). The way this meter comes from the factory it's perfectly calibrated for this type of water monitoring.However, if you are trying to keep sensitive water-loving tropical plants alive (such as papaya, guava, pineapple, passion fruit, etc.), especially in a hot dry place like low desert southern Arizona in summer time, these meters WILL kill your plants if you simply go by the readings they give rather than by common sense and how you wilty plants are actually looking! If you wait until these meters read in the 4-7 (moist) range before you water these types of plants, your water loving tropicals will wilt and start to die (even in the Arizona winter when it's only in the low 70's outside). But that's 'OK' because I've got a fix for you that you can implement.I took the back off of one of the meters and took it into my electronics lab to see what makes it tick. There are no markings on the meter to indicate it's full scale deflection; I'm going by my 45 year's experience as an electronics tech to go out on a limb and say they must be either 100uA or 500uA meters (uA means micro-Amperes for you non-technical types - a very small amount of current that's non-lethal even to a baby newborn mouse). One micro-Ampere is one millionth of an amp. Remember above I said the probes are very sensitive? OK, so I carefully pried the back off of one of the meters - they are held on by the press-fit of 6 little plastic pins protruding from the back of the case, that fit into 6 little sockets in the main case of the instrument. None of mine were actually glues, but still they are a tight fir and you have to VERY carefully pry off the back a little at a time. I eventually got mine apart, and even though they are not glues, I still broke off one of the 6 little pins (no big deal).I then got some banana-to-minigrabber test leads and hooked them up to the output of the probe (right on the little soldered tabs on the back of the meter). I connected the other end of the test leads to a calibrated Hewlett-Packard model 34401A bench-top DMM, set to read DC millivolts. Sticking the probe into the cup of black coffee (or the black Earl Gray tea) gave a reading of 485 millivolts (or or just a tad under 1/2 volt for non-technical types). That was a lot more than I anticipated it would read, considering there is no battery in these things. Then I desoldered the red wire going to the meter and read the output of the probe without the meter movement's internal resistance to load it down; back into the cup of tea and it read 5512 millivolts (just a tad over 1/2 volt). Then I dried off the probe with a paper wipe and a little application of gentle heat from a heat gun. Next experiment was to get my hungover coworker with the obnoxiously strong stale old alcohol breath to breath some humid exhaled air over the probe tip - that gave an open circuit reading of 4.3 millivolts! So yeas, this probe is sensitive indeed!Obviously what was needed is a way to reduce the sensitivity of the thing so that is would better read the correct water level in the soil of water-loving tropical plants. I found an extra sealed mini-potentiometer laying around (well, actually I had 6 different values to choose from) so I chose a 1,000 ohm trimpot. I didn't think one of a larger ohmic value would be needed, and the size of the potentiometer was such that it easily fit inside the instrument's case. It's the type of potentiometer that has a 1/8" slotted shaft for adjustment with a small screwdriver, and it has a 5/16" nut that you can lock down the shaft after making the adjustment so's it won't change afterwards. It's a sealed military grade 1/2W linear taper potentiometer, part number RV6NAYSD102; these are available at digikey.com or mouser.com (and maybe Amazon though I didn't check). There was plenty of extra red wire inside the instrument already, so no additional wire was needed. I put the potentiometer in series with the red wire going to the meter, and I wired it so that rotating the slotted shaft will result in decreasing the instrument's sensitivity.Next experiment was to insert the probe back into the coffee and the Earl Gray tea (no potted plants in the lab to check it in soil); I rotated the shaft of the potentiometer so that instead of the meter reading 10++ it was now reading 9.5. I then hooked up the Hewlett-Packard 34401A DMM across the potentiometer and I found that I had set it up so that only 178 ohms out of the 1000 ohms available were used in order to get that reading of 9.5. So I considered that a good outcome for my experiment - I still had plenty of adjustment range in case I needed to make it even less sensitive to moisture level in actual soil.Then I used a 'P-Touch' label maker to make two 1/2" high labels (white letters on black tape); one label says "Desert Plants" (for the un-modified instrument) and "Tropical Plants" (for the modified instrument). You can see the results of this in the attached photos.After work I checked out my work in actual soil. I used the "Desert" one to check out the pots of cacti, and verified (by checking it against the pop-sickle stick method) that my wife has been over watering those plants because the meter was reading between 8 and 10++ depending on the pot I checked - I counseled her to stop watering those cacti & succulents for a month or so, then check them again. After that I looked at several potted tropical plants with the "Tropical" meter - these pots had all been watered yesterday until water came running out the hoeld in the bottoms of the pots. I decided to reduce sensitivity a bit more on the modified meter, based on how the soil looked and felt in the fist of my hand (it had drip-dried out a bit more since watering yesterday).So now, overall, I'm satisfied with my purchase and these meters. It's good that they came in a pair, that way I have a perfectly calibrated meter for each type of plant that I'm raising in pots.I was going to give a 4-star review, because the meters aren't perfect. But after my lab experiments, I decided to up the review to 5-stars; reason being is that I think all of the meters like this that you can buy (different brands) are all going to be the same basic thing (regardless of price and outward appearance). No one meter would be the perfect meter for all kinds of plants! Unless the meter came with a toggle or rotary switch and two (or more) trimpots, so that you could self-calibrate them to the sensitivity you need for what ever type of plants you are raising (in the case of wanting to use one meter for multiple types of plants). Or at the minimum the meters should have at least one trimpot in them so that you can self calibrate it to one given setting at least. And indeed I DID find such a meter on Amazon - it had a much stiffer 3/8" diameter stainless steel probe, and the box at the top of the probe was heavy duty metal and it had a trimpot in it for calibrating it. I suppose THAT meter would be the perfect one, but then again it's priced like a perfect meter and I didn't want to pay that much. So I'm happy with this inexpensive purchase of a pair of meters, and using the un-modded one for plants that want dry soil, and the modded one for my water loving plants.