Your cart is empty.
Your cart is empty.This engine oil pressure sensor is designed to match the function of an original sensor on specified vehicles. It is engineered to help accurately monitor oil pressure when an original sensor has failed from heat or internal component damage.
L B
Reviewed in the United States on January 9, 2025
Bought an autozone equivilent part, returned the autozone part once I saw this was half the price. This part is higher quality than the autozone part. Not sure how it compares to an OE part, but it works just fine for me now. If it fails, I’ll come back and change my review
Customer
Reviewed in the United States on January 4, 2025
no issues with product works great
Unknown
Reviewed in the United States on January 31, 2025
I installed this oil pressure sensor in late November 2024 to replace my factory sensor, which had failed and was causing the gauge to max out constantly. Installation on my 2004 GMC Sierra was straightforward, and it worked fine at first. This sensor came with a screen, but my truck didn’t have one from the factory, so I left it out.After two months, the oil pressure gauge started reading extremely low, down in the red at around 5 PSI and never above 20 PSI, even at high RPM. I replaced it with a different brand in late January 2025, and the issue was immediately resolved. The dash gauge is now reading normally again. When I checked this sensor after removal, it was clean with no visible issues, but for some reason, it failed after just two months.
Worked for less than week than failed
Reviewed in Canada on January 21, 2025
Sensor failed in less than week
Minitruckmafia
Reviewed in the United States on July 26, 2024
Seems decent. Time will tell
Daniel
Reviewed in Australia on March 6, 2024
Busted after about an hour. Leaking through the electrical connection. I live in Australia, so not easily replaced either..
Computer Technician
Reviewed in Canada on February 15, 2024
Works on the LS1 in a 2000 C5 Corvette.
draven
Reviewed in the United States on December 27, 2024
Fit good on 6.0, once installed and the engine started it took about 45 seconds to register but not it registers as soon as the end gone starts as it should.
Chris
Reviewed in the United States on December 13, 2024
Nice cheap part, OEM fit and easy to installDurability is great and no leak issues
Ben_the_Builder
Reviewed in the United States on November 4, 2024
I was getting a check engine light and code PO523 high oil pressure. Watched lots of videos on how to change this thing out.It is not an easy job but it’s doable. This sensor is way at the back of the motor on top near the firewall. Make sure you have a sensor socket and swivel adapter and small extensions. I used a headlamp and mirror just to see what was going on, because you can’t really see it directly and have to do a (ahem) reach around to get the job done!Oh yeah, don’t drop the old sensor down into the darkness…I did and it was a PITA to get it out!Make sure to remove the little filter under the sensor if it has one. You might need a small pick to get it out. The new sensor comes with a new little filter so make sure to put that in before installing the sensor.The check engine light and code is finally cleared now!
Pam
Reviewed in Canada on August 28, 2023
I watched a couple of you tube videos and had it installed easily!!
Conrad Hutchings
Reviewed in Canada on October 17, 2023
wored great on my boss 2005 cadillac escalade ext
Recommended Products
