Your cart is empty.
Your cart is empty.Product Description
Product Description
The multi-function doorbell adapter saves you the trouble of frequent battery replacementSpecial design and high quality materials ensure that the adapter is kept in low temperature to charge safely，Suitable for various doorbell videos and thermostats
Note: Before purchasing, Please confirm that the voltage and current required by the doorbell are consistent with this power supply. Please consult the Voltage requirements of your doorbell for specific recommendations. Please connect the doorbell before connecting the power supply, and be careful not to let the two cables connected together cause short circuit
Continuously Charging
It can be continuously Power supply your device without worry about taking off the doorbells/ thermostats and low battery, which is time-saving and effort-saving.
For Doorbells
1.Keep adapter unplugged.
2.Install wires from 24 volt adapter into the terminals for your doorbell unit (Simply attach the two exposed copper wires to the doorbell and tighten the screws, regardless of positive or negative polarity)
3.Plug adapter into outlet.
4.Power up and verify your doorbell is receiving necessary power using the accompanying application.
For thermostats
1.Cut off the power of circuit breaker.
2.Install the wire from your 24 volt adapter to the “C” terminal and the other wire to the “RC” terminal. You need to use included jumper and connect from “RH” to “RC” terminals，if HVAC system has a cooling.
3.Plug the power adapter into the socket and turn on the power of the circuit breaker. Install the panel on the thermostat.
Specifications
Input voltage: 120 V AC, 60 hz,
Output voltage: 24 V AC, 500 mA,
Dimensions: 2.46 x 2 x 1.6inch
Cable length: 500 cm ( 16.4FT)
Wire Type: Stranded copper wire
FOR DOORBELLS
- Keep adapter unplugged
- Install wires from 24 volt adapter into the terminals for your doorbell unit (any wire can be connected to any terminal)
- Plug adapter into outlet
- Put doorbell face plate on housing unit
- Power up and verify your doorbell is receiving necessary power using the accompanying application
FOR THERMOSTATS
- Shut off the circuit breaker power supply
- Install any wire from the 24 volt adapter to the "C" end and another wire to the "RC" end. If your system has a cooling system, you may need to use the included diode and connect the “RH” to the 'RC’ terminal.
- Plug the power adapter into the socket
- Open the circuit breaker power supply
- Install the panel on the thermostat
Compatible with:
- Ring Video Doorbell
- Ring Video Doorbell 2
- Skybell Doorbell
- Honeywell Smart Wifi Thermostat
- Nest Thermostat
- Ecobee Thermostat
- Sensi Thermostat
Save your money and time
Ousaly provides customers with high-quality and low-cost replacement parts, making machine repair easier, and making your life healthier, more comfortable and more convenient
Our original intention is to help customers solve all kinds of home appliance problems encountered in life, and provide accessories to make it easier for customers to solve problems independently, making life easier.
Able to help you solve your problems, your smile is our eternal pursuit.
This is a device that you can keep your machine continuously charging your doorbells or thermostats. Many old homes or apartments do not have a "C" wire to their current thermostat, and newer devices require a C-wire to power the device.This simple product allows you to make the problems
Shannon I Quick
Reviewed in the United States on March 9, 2025
Works perfect for ring doorbell and stays charged at 100 percent.
David J. Willey
Reviewed in the United States on February 5, 2025
works perfect
Joseph Schutz
Reviewed in the United States on February 13, 2025
This transformer worked great on my ring doorbell for exactly 2 and a half months. Then, with no warning, it simply stopped providing the doorbell with power. I would not recommend!
Sylvia
Reviewed in the United States on February 11, 2025
works as described
Rob M
Reviewed in the United States on January 7, 2025
I've had this transformer for about a month now. It works as it's described. No glitches, no issues.
Lance R. McGlynn
Reviewed in the United States on January 29, 2025
Easy to install.Good length had excess but that is much easier to use.Just used insulated staples to make length work
Average reader
Reviewed in the United States on November 1, 2024
I’ve had this doorbell installed a little over a year. I usually could get a few months before needing to charge it. Since I recently got new neighbors that walk through my front yard daily and set off the motion detection at least 3-6 times a day, EVERY DAY, I barely get a month before the battery is low. I got this to keep a constant power supply.This adapter is working so far. I had to do some troubleshooting at first. It does matter what side you connect the wires to so switch them if you don’t have power at first. At first it only showed that the power supply was the battery in the ring app even though the doorbell button light was on. After I rebooted the doorbell it would finally show that it was hardwired. If you see the doorbell button light is on when plugged in but the app says the power supply is battery not hardwired try rebooting the doorbell.Also I recommend testing it out before installing the doorbell on the mount. I ran the wires behind the mount so the doorbell would sit flush.My main concern at this point is how thin the wires are. I don’t know how well this will hold up to the weather and wear from opening and closing the door. I don’t have the option to run the wires in the wall. I may try covering the wire with electrical tape for some added protection.
Jonathan I Hiser
Reviewed in the United States on October 30, 2024
I bought this for my 2024 Ring Battery Doorbell Pro. I was actually about to return it because the battery percentage kept dropping from a full charge, despite the device power source reading “hardwired.” Turns out the ring doorbell either charges up or depletes down to an 80% battery level. It’s just how this doorbell model manages the battery. Otherwise, the charger works perfectly as advertised and powers the doorbell just fine. I appreciated that the cables are particularly thin, at least compared to competitors. Installation was easy. The length was a little overkill for my needs, but the price was markedly less than the official Ring hardwired charger.
CARLOS
Reviewed in Mexico on October 3, 2024
LO CONECTÉ A UN TIMBRE RING Y NO FUNCIONÓ
Recommended Products