Your cart is empty.
Your cart is empty. 💚This thermostat is simple-stage, electronic temperature controller. The large, lighted LCD screen display is easy to read. The case is designed with fireproof ABS material for human engineering. Temperature sensor is waterproof with high quality, high-accuracy.
Features:
❤️💚💛Large LCD screen
Display the sensed temperature, setting temperature, and custom icons on the display indicate working mode, glare free and eye protected.
Support reading with Centigrade or Fahrenheit unit
Easy to use and program
Only 2-step settings for your application, and plug and play design.
With a temperature correction function
Allow user to adjust measuring accuracy base on diferet probe, etc.
Delay starting protection
Protect refrigerating compressor lifetime, avoid compressor to start frequently.
❤️💚💛High and low temperature alarms are available
Over-temperature and sensor fault alarm
Specifications:
Power Supply: 100-240VAC 50/60HZ
Max output load: 1650W@110V, 3000W@220V
Max current: 15A
Temperature Control Range: -40~120℃, -40~248℉
Temperature Control Mode: Heating or Cooling
Temperature Resolution: 0.1℃, 0.1℉
Temperature Accuracy: ±1℃, 1℉
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: Waterproof NTC Sensor
Sensor length:Approx 2m(6 fts)
Input Power Cable Length:150cm (5ft)
Output Power Cable Length: 18cm (7inches)
Controller Dimension: 137*65*28mm
❤️💚💛Please note:
The controller will save all settings when power failure. The DIGITEN products are guaranteed to the original owner for one year against defects in workmanship and materials. If there are any questions, please contact us, we will help you.
❤️💚💛Packaging include:
1 x DTC151 Temperature Controller
1 x NTC sensor
1 x Manual
Client d'
Reviewed in Canada on June 5, 2024
Bon rapport qualité/ prix
Ryan Newman
Reviewed in the United States on December 16, 2024
I’ve got two of these in our greenhouse powering 1500W space heaters for the winter time. They work great
Somewhat Rational
Reviewed in the United States on January 14, 2024
It does what it describes and is easy to read and configure but only after you understand their abbreviations. They use (SV) for Start temperature Value and (RV) for Run temperature Value. Once you understand their codes it is easy to configure. My complaint is that in a year you will not remember what RV and SV mean and will need to find the manual. I think something like SP for stop and ST for start would be better.
Stephen F Roth
Reviewed in the United States on July 23, 2023
It worked fine only one time and then stopped triggering the device.It would not turn on the heat or cool setting. I even put a dummy load on the outlet with a Fluke meter and it would not trigger the load. The green RUN light was on but it would not trigger.Seems like a nice device. But if it does not work it gets zero stars.
Ed in San Diego
Reviewed in the United States on July 1, 2023
I have had this unit for over a year. It continues to work as advertised. I think it is difficult to set up because there are so many applications for this device. I bought it to run a small pump that pumps my spa water through a solar panel and then back to the spa. Once I set it up it worked fine. I keep the swim/spa at about 92 degrees F in the summer. I have a regular 110 v "outlet timer" to turn on every day between 11am and 4pm. It turns on this thermostat device and the device wakes up and turns on the water pump that feeds water from the swim/spa through the solar panel (2'x12') and heats the water in the spa if the sun is shining. It is a small pump which lives in the 2,000 gallon swim spa. RV= 91.5 degrees F SV= 93.5 degrees F.
Grant County Golfer
Reviewed in the United States on March 5, 2023
I bought an oil filled space heater for my bedroom, controls are mechanical, no digital precision temp keeping. As hard as I tried to dial it in the temperature swings were as much as 5*F. Unacceptable! So I bought this item to see if it were capable of holding to a 1-2 degree range. It does, and better than 1-2 degrees, it holds the temps to + or - .5*. Amazing! I may buy another one plus another heater to replace a wall heater with fan. It's noisy and irritating. I have a heat pump mini-split, but they don't work in low temp high humidity very well. I save that unit for cooling in the 90+ temps in summer.I was led to believe this unit performs without a sound. Well, the relay clicking on/off is not quiet, but I've gotten used to it. I can recommend this for heating or cooling solutions. Just make sure what you want controlled has mechanical controls, or for digital controls, comes back on after a power outage, or you'll be reprogramming your heater or AC after each interruption. Easily determined, just pull the power cord from the wall connection while the unit is running, wait a few minutes then plug it in. If it continues on like nothing happened then this unit should work fine.
RT
Reviewed in Canada on February 19, 2023
pas de problème depuis que je l'ai acheter
doug t
Reviewed in Canada on January 26, 2023
great quality and easy funtion
Long-time Shopper
Reviewed in the United States on July 24, 2022
The media could not be loaded.
juan serrano
Reviewed in the United States on October 3, 2022
I have a fridge in the basement I use as a beer fridge/ extra fridge for items that overflow from our kitchen fridge. I'm not sure what's wrong with it, but it has been coolling TOO well and everything in it was freezing. It could be malfunctioning or I read that it was too empty and didn't have enough stuff inside to soak up the cold air so it was freezing. Either way, this saved it and it now keeps everything just over freezing without actually freezing. As for usage, it is not the most intuitive controls. It is set to heating by default andbyou have to figure out how to navigate through the settings to change the temperature settings. You have to set the temperatures correctly and it will automatically swutch to "cooling". Aside from that, its "Set it and forget it!"
Customer
Reviewed in Canada on January 12, 2022
Easy to use
Finch
Reviewed in the United States on April 2, 2022
The settings are easy enough to understand though you will need to fiddle with the settings in order to get to maintain the temp you want. I have my controller set to turn on at 39F and turn off at 37F however there is some delay while the fridge cools off and it will overshoot by a few degrees. With those settings I’m able to maintain a temp between 34F in the lowest part of the chest (where the sensor is sitting) to 42F in the upper most part. The placement of the temp sensor will be important as it will determine what your settings need to be.
Nathan Leclair
Reviewed in Canada on December 29, 2021
Used to control temperature. Works awesome
Recommended Products
