Your cart is empty.
Your cart is empty.Product Description
Why do you need a cylinder compression pressure tester kit?
1. Troubleshooting: Gauge tester will reflect problems through its readings after a quick and perfect test.
2. Saves time&money: Normally, the work is no more than 10 minutes maximum. And if it helps find out the problem of the engine, obviously, it costs much less than its value.
What makes JIFETOR cylinder compression pressure gauge tester kit special?
- 1. Quick and convenient diagnostic test. Helps find out the problems.
- 2. Push-on connectors for quick check (no need to thread into head).
- 3. 4-sized straight extension rods instead of brass thread adapters.
- 4. Blow molding box keeps everything in place and protects the pressure gauge during storage.
PACKING LIST
- 1 x Compression Gauge (0-300psi, 0-20bar)
- 4 x Extension Rods with Metric Thread (10*1, 12*1.25, 14*1.25, 18*1.5)
- 2 x Quick Push On Connectors
- 1 x Long Extension Hose
- 1 x Instruction
- 1 x Blue Blow Molding Case
3-WAY USAGE
First Type
Gauge with push on connectors.
Second Type
Gauge with extension hose.
Third Type
Gauge with extension hose and straight rod.
TOOLS DISPLAY
Cylinder Pressure Gauge
With safety relief valve and quick coupler for quick test.
Push On Connectors
Straight type and angled type for you to choose from.
Tapered head, universal and easy for connecting the spark plug
Long Extension Hose
17" in length. Adopts rubber nylon resin material for pressure and temperature resistance.
Aluminum Extension Rods
4 optional sizes (10*1mm, 12*1.25mm, 14*1.25mm, 18*1.5mm) for use on extending hose distance.
EASY TO OPERATE
- 1.Before the compression test, run the engine till it reaches normal temperature and stop the engine.
- 2.Disconnect all the spark plug wires, clean the dirt around and remove the spark plugs. Remove the air filter and fully open the throttle. Disconnect the ignition system.
- 3.Tightly insert aluminium rod rubber cone adapter into the tested cylinder's spark plug well. Or you can test the cylinder pressure by screwing the right size dedicated adapter, hand tighten only, do not by a wrench.
- 4.Observe the gauge and record after the pointer stabilizes. Press the release valve to zero position. Repeat the test, do it at least twice for each cylinder and take the average of the values.
- 5.If the measured cylinder pressure is within the vehicle manufacturer's specifications, and the readings are not vary by more than 10% from cylinder to cylinder, then there is no problem for the engine compression. (A variation in compression readings between cylinders is often a better indication of engine problems than the absolute values of compression.)
USAGE AND FUNCTION
JIFETOR engine cylinder compression measuring meter tool set is perfect for checking compression pressure on most gasoline/gas/fuel engine cylinder, but not suitable for most diesel engine because of the low pressure range 0-300PSI.
Assist to diagnose following problems:
- Valve sticking
- Carbon build-up
- Cracked cylinder head or defective main gasket
- Poorly seated or worn piston rings Burned or damaged piston
James Dearth
Reviewed in the United States on March 7, 2024
Worked as it was supposed to.
Sean
Reviewed in the United States on February 23, 2024
Not sure if it will hold up. But worked for the two times I needed it.
Pristine Shopper
Reviewed in the United States on December 2, 2024
Worked perfect !!!!!!!!!!!!
Andy
Reviewed in the United States on January 31, 2024
Some double cam engines don't like a twirling flex hose shoved down those dark tubes, looking for a bite.
Terry N.
Reviewed in the United States on June 24, 2023
I thought I would pay a little more than some of the other like kind products to get better quality. Do not waste your time considering this pressure set. Did not come close to being accurate. I tried both the compression tip and the screw-in and got 60 lbs. difference. The compression tip was at least closer to accurate.
Bruce Firus
Reviewed in the United States on December 12, 2023
As soon as the package was delivered I popped the box open an was able to get compression readings on my sons car. Eezy Peezy to use, especially on engines with deep spark plug access.
Mayra Rosalez
Reviewed in the United States on August 11, 2022
Bought this for my daughter who does mechanic work, they worked better than the expensive snappy ones I own. Aka blue point. Amazon has become our go to for quality tools.
Caveman
Reviewed in the United States on December 2, 2021
Quality looks excellent. I will be creating a centering donut to reduce side loading on the extensions when screwed into aluminum head.
Recommended Products