Your cart is empty.
Your cart is empty.Product Description
EASY TO ASSEMBLE
Quickly cut your desired cable length with scissors and connect the ¼ inch jacks using the magnetic screws and screwdriver provided. No cable stripping required.
CUSTOMIZABLE
Tailor the length of 5 low profile patch cables with 10 feet of cable and 10 right angle solder-free connectors. Our versatile kit can also make straight cables by simply leaving the connector caps off.
SUPERIOR TONE
Shielded oxygen-free copper cable provides low capacitance for pure audio signal transparency and low noise while preventing electronic interference.
BUILT TO LAST
The simple yet rugged design is made to withstand use on stage or in the studio, while the stylish gold tipped connectors resist corrosion.
CONTENTS & DIMENSIONS
- Kit includes 10 connectors, 10ft of cable and 1 magnetic screwdriver.
- Cable width measures 0.16".
- Connector cap measures 0.39" x 0.47”.
INSTRUCTIONS
- Cut desired cable length using scissors or hobby knife. Be sure to cut the cable straight and not at an angle.
- Remove screw on the connector cap, detach cap and firmly insert the cable. To make straight cables, simply leave the connector caps off.
- Replace the connector cap and tightly refasten the screw. Test each cable individually before wiring up your pedalboard.
TROUBLESHOOTING
If a cable is not working or there's a loss of tone or volume, tighten the screw as firmly as possible until a connection is made. If that doesn't work, try backing the screw off a little. If there's still no connection, make sure the cable is cut straight and firmly inserted into the connector.
MORE GREAT PRODUCTS FROM CROSBY
Crosby Pedalboard Grip Kit
Behind every great pedalboard is a strong hook & loop kit. Made from 100% nylon, The Pedalboard Grip Kit includes 10 feet x 2 inches of industrial strength hook & loop plus 6 cable ties to keep your pedals locked down and your cables under control.
Crosby Slotted Pure Bone Bridge Pins - Abalone Dot
Add clarity, tone, sustain and volume to your acoustic guitar with our Pure Bone Bridge Pins. Made from genuine ox bone with abalone inlay, our bridge pins offer an easy and affordable way to improve your guitar tone.
Crosby Slotted Pure Ebony Bridge Pins - Abalone Dot
Add clarity, tone, sustain and volume to your acoustic guitar with our Pure Ebony Bridge Pins. Made from genuine African ebony with abalone inlay, our bridge pins offer an easy and affordable way to improve your guitar tone.
Crosby Monster Piano Stickers
Monster Piano Stickers may look silly, but they're serious about making it easy for kids and adult beginners to learn how to play piano or keyboard. The fun, vibrant design will delight players of all ages and can adapt as they progress by simply removing the monster letters and leaving behind just the notes.
Jason Shoenfelt
Reviewed in the United States on February 26, 2025
Love this pedalboard wiring kit, this is my second one. So easy to use, just cut to length, no wire stripping and all my patch cables worked the first time.
Richard Davies
Reviewed in the United Kingdom on February 25, 2025
Bit apprehensive about going down the solderless route again as previously, a different brand was not so good!However, needed custom cable lengths for a new board build… after investigating and reading many reviews, settled for this one. Crosby. It’s far exceeded my expectations. This kit is brilliant. Unobtrusive, silent and easy to create. Bought two kits but there was plenty of cable left from just using one. Will look to buy just the jacks only for another smaller build for a fly rig. Very impressed. Great product.(Board-Boss BCB90x)
Paul H.
Reviewed in the United States on December 5, 2024
Incredibly easy and dead quiet operation. Essential if you want to build a professional looking pedalboard.
Micah B.
Reviewed in the United States on November 7, 2024
They cables are solid and easy to make. The parts are highly consistent and fit together well. I have gorilla strength, so I overtightened one and had to remake it. Don’t overdo the screws and they should work well on a pedalboard if you’re not retooling things much. My rig will remain as it is for a very long period, so I expect they will work there for a very long time. No need to pay more; these are at least as good as D’Addario and Boss cable kits.
TicoSF
Reviewed in the United States on October 31, 2024
I set up my pedal board in a non traditional way, putting my always on pedals on top, but still wanting a traditional chain. This means needing some long patch cables. This kit SAVED me from having to use patch cables that were too long and gave me the freedom to put my pedals wherever I wanted.Assembly is somewhat easy. Push in the cable all the way into the connector, bend the cable back and screw in the back harness (USE a magnetic screwdriver for this).I got 5, perfect length, cables from this kit, keeping the underside of my board clean and simple! I love this product!!
M R
Reviewed in the United States on October 17, 2024
My first impression was that this was going to be garbage. Glad I was wrong!The cable is small, but don't let it fool you. The sound is incredible. As can be seen in the picture, I was able to get pedals close! Too close actually and I'll have to deal with that, but Crosby cables exceeded my expectations for sure.One thing to note, and I can't stress this enough... DO NOT OVER TIGHTEN THE SCREW. I messed up 3 cables doing this. The screw only needs to be close to flush or flush with the cover. Fortunately, all I had to do was cut and reinstall the good cable into the jacks. I have leftover, with 3 mishaps, and actually bought a pair of extra jacks, so 6 lines. Would recommend, and will be purchasing another set.
Frans Hansson
Reviewed in Sweden on April 22, 2024
Riktigt trevlig produkt!
Matthijs Gaspar
Reviewed in the Netherlands on May 27, 2023
If you are looking for a great solderless cable kit don't look further and buy these with confidence. It's hands down the best value for money you can find on the market. Super easy to assemble and they work and sound great. Small footprint and these work great with for instance the Boss ES-8 switcher. Highly recommendable and you can save yourself a lot of money compared with other brands. Great stuff from Crosby!
AK
Reviewed in the United States on April 17, 2023
Once you're acquainted with the things that prevent a cable from working, these are great. Make sure the cable is in the tip far enough, then make sure the screw is tight enough. I thought these would be wayyy more finicky.IMO, this product is priced fairly. I think the better known alternatives are not. I'll pay for value. Those alternatives have a pretty poor value proposition. But people are ridiculous about cable. They obsess over replicating old technology to get "the tone." But for some reason think they need a $65 guitar cable, when in reality "the tone" probably came from long, coiled cable with oxidized hardware that was repaired with electrical tape (like the cheap kind at Menard's).Get it.
kinder
Reviewed in France on April 1, 2023
Franchement, très agréablement surpris, facile à assembler, zéro soudure, et pas d'influence sur le son.Je n'utilise plus que les kits Crosby pour mes pédales et pedalboard. Beaucoup plus simple que de sortir un fer à souder, connectiques coudées pour gagner de la place, câble relativement rigides mais ok, et tarif incroyablement bas par rapport à du George L. (made in China vs made in USA :( ).
Jmart
Reviewed in the United States on September 7, 2022
Easy to assemble. Enough length on the provided wire. Sound quality has been spot on so far. I used two packs (of 10) to make my board. A bit on the pricier side, but the quality is there. Out of 20 connections, all work perfectly. I have one hang up on my first round that required me to troubleshoot each cable individually. Once I found the problem cable I cut a small piece off, and replaced the tip. I love that you can continue to use the tips to make different sizes as needed. The shorter size I have is probably only 1 inch, but I was comfortable doing it because I can just take the tips off and use more wire to make a bigger cable after that. If you think about expensive interconnects, they can cost $4-5 a pop (if not more). I suppose these cables are right on par with those. Positives are the customizability (something I value a lot), sounds quality, and build quality. Negatives are: still on the pricier side compared to low cost bundles (admittedly lower quality), some DIY capability (while they have made the process SUPER simple, you can still have a faulty connection which requires a redo of that tip). I am DEFINITELY buying more when I need them. 5 stars from me.
Raí Herrera
Reviewed in Mexico on June 12, 2021
Si bien, uno tiene que ser cuidadoso en el armado, son sumamente sencillos de ensamblar. Son de muy buena calidad, transparentes en sonido y a un precioso bastante bueno. Mucho mejor que cualquier otro
Shane hughes
Reviewed in the United States on February 2, 2021
**Update: I recently fixed my cables and they are currently working again. These cables can be tricky and frustrating at times but they are worth it when you get them working because they look nice and sound great. YOU HAVE TO MAKE SURE THAT THE NEEDLE IN THE TIP IS POKING INTO/TOUCHING THE COPPER IN THE CABLE. I had to spend a lot of time going over mine and making sure that the copper was exposed enough to create a solid connection. Lets hope it lasts! The main thing to note with cables like these is that they have some short comings, but if you have patience then they can be a great asset to your board.Old review:Save your money. I like the look and the sound quality when they worked. I have only had these about a couple months and I not only had to play with the cables for hours to get them to work initially, but afterwards they even lost the connection!! And now are dead. I really liked how nice these made my pedal board look and sound so Im very disappointed that it didnt work out. Go with D'addario!
Recommended Products