Just bought a NR200P V2 from this seller.As soon as the product is out of the package, you can see lite scarf one side of the case. Thought I could live with it, but I started to be scared it would be a quality issue. So at the end, I ask for a refund before even installing anything in it.Little reminder about the seller: approved the refund, but shipping is mine to assume? Since when, the costumer should be accountable for the bad quality of a product? Think well before buying from this seller!Edit* The seller is actively trying to find a solution so I can be provided with a prepaid label, since I brought Amazon Customer Services in the conversation. Will keep up to date.

Perfect case for me , I can fit total of 6 fans , 7 of I go one fan into 80mm

تركيبه سهل لانك تقدر تفك كل شيءوصل من الصين بحالة ممتازةراكب عليه مروحة 92وفي مروحة 120موجودة تركب كبس بدون براغي مع شبك حمايةوفي شبك حماية أضافي اذا بتشتري مروحة اخرى

I crammed a rtx 4080 from msi in there. Works but not beautiful.I’d recommend not using a 12vhpwr adapter and instead invest in a custom flexible silicone cable that has a direct connection if you plan on putting a 4080/4090.

I’ve built in several ITX cases, but none as easy as this one. Theres enough space once the panels are off that you will easily be able to position the components as long as you follow the guides.The custom pieces of this case (toolless mounting for SSD’s and Fans) are easy to use and well made. Additionally there are filters EVERYWHERE which are easily removable.The front panel little holder included made putting those pieces in a cinch.Temperatures with just the included fans are relatively good, capping out at about 70c for my Ryzen 5500 and 6650xt.Lastly, but certainly not least, it looks awesome for a minimalist desk shelf PC. I cannot recommend this case enough, especially at the price.

Satisfied

I recently built a system around micro-ATX motherboard and micro-ATX case.At the time of choosing components, I seriously debated if I should go with mini-ITX.I love small cases but I didn't want to pay the premium for "going small" since SFF parts are usually more expensive.Little time have passed, and every single day, I was itching to switch to ITX platform, almost driving myself crazy.This would mean that I would have to spend more than $300 to get a mini-ITX mobo (~$120), NR200 case ($80), and SFF PSU ($120).That wasn't going to happen.Few days ago, I stumbled upon a post on this case and he said very few micro-ATX motherboards will actually fit in this case.By coincidence, one of those boards was the board in my system.Then, I found another post saying that somebody put a ATX PSU in this case without the bracket using zip ties.If everything works out, only extra expense I would have is for this case at $80.Time to discuss some details of the build.SystemAMD Ryzen 5 3600ASRock B450M-HDV R4.0Powercolor RX 5600 XT Red DragonCorsair Vengeance LPX 2X8GB 3200MHzSabrent Rocket Q 1TB NVMe M.2ARCTIC Freezer 7 X - CPU Cooler2 X 120mm White LED PWM fansAresgame 500W 80+ Bronze PSUCaseI chose this case for the clean look, relatively cheap price, and, of course, compatibility with my motherboard.Upon unboxing this case, I was very pleasantly surprised.1. Build quality - being heavy doesn't always mean high quality, but being light usually mean crap quality.This case is surprisingly heavy and solid2. Extras - tons of accessories included1 X 92mm PWM fan, 1 X 120mm PWM fan, 2 X fan grills, 3-way fan header splitter, mount for vertical GPU, small zip ties, and couple of velcro strapsFit / Compatibility / Build1. Motherboard - my micro-ATX motherboard (230mm X 201mm) barely fits in this case. Only 4 mounting screws meant for ITX boards, but I'm not too concerned since GPU is held in place with screws on PCI bracket.2. Connectors - front panel audio connector was too short for this motherboard. But I never, ever use it so no problem for me. Everything else fits and reaches just fine.3. CPU Cooler - CoolerMaster lists clearance up to 155mm, Freezer 7 X at 132.5mm easily fits.4. GPU - since my mobo is micro-ATX, I had to use bottom two slots of PCI bracket. This doesn't leave room to mount fans on the bottom of the case.5. PSU - my ATX PSU is mounted against front panel with daisy-chained zip ties. You can buy 3D-printed brackets to mount ATX PSU to NR200 from *bay, but this is additional cost and I'm cheap.6. Fans - used included fan splitter to mount 3 fans to a single fan header. 1 included 92mm as exhaust, 2 X 120mm fan on top of case also as exhaust. PSU fan will also exhaust to top of the case.Performance / ThermalsThe system is just as cool compared to my micro-ATX case with 5 X 120mm fans.Even though space is cramped, channeled airflow with everything exhausting through top really shines in this case.I haven't and have no plans to overclock my CPU past base PBO of 4.2ghz, idle (35C-45C), load (60C-72C), plenty cool for my usage.GPU is very close to bottom mesh panel and gets plenty of fresh air, idle (32C - 38C), load (60C-70C).Overall this turned out much better than what I had expected.Case looks AMAZING, no regrets at all.Hope some of you find this information useful!

This is an excellent case, and one of the few mainstream and affordable small form factor PC cases. Its major relative compromise is the size, which is close to as large as "SFF" gets. The case is also heavier than most SFF cases, being mostly made of steel, versus aluminum or plastic. However, it has nearly no size or cooling limitations in its class. Aesthetically, it follows the general SFF PC trend of minimalist design. Anything I have planned for my build, be it the largest GPU I can afford, or adding some old 3.5" hard drives to my system, are possible in this case, which is easily transportable, though not quite backpack portable. I won't spend much time talking more about the positives of this case but I'll highlight some of my gripes, which should not be deal breakers, but ways that Cooler Master can improve the case without reducing its capabilities.Though the NR200 can accommodate almost any ITX hardware, its layout design is not completely perfect. I would have appreciated some gaps in the frame or motherboard area for routing cables behind the motherboard. One of my PSU cables is routed between the motherboard panel and the case's right side panel (when looking towards the case), but it's the flat kind which raises the case's side panel ever so slightly. Others with round or quality braided cables looking to route their cables behind the motherboard without raising the side case panel will need to route the cables in the gap between the motherboard and the motherboard panel. Unfortunately, they will need to do this before installing the motherboard, and uninstall the mobo every time before disconnecting. Some extra spaces or gaps that allow the cable connectors to slide through would have solved this problem. Another gap for the 24 pin connector would have improved quality of life a little, too, though I'm not sure if that would be possible in a practical spot. Having the thick 24 pin cable extending from the PSU in its default position can press down on the GPU without some careful cable management. Fortunately, Cooler Master provided some velcro straps underneath the PSU that help with this a lot, likely because they anticipated this problem for most consumers. Still, I can tell that Cooler Master intended this case to be as easy as possible for beginners, and neat cable management and avoiding pressure on the GPU will likely be a fairly difficult step of building in this case. Finally, the case could perhaps use some lengthier front I/O cables, so that they could have been routed behind the motherboard without blocking the PSU fan.Speaking of front I/O, I would have also preferred a USB type C connector on the front. I can understand that it was not included due to cost, but I would prefer a version of the NR200 with a type C port and no fans, and likely would have even paid $10 more for that tradeoff. My version of the NR200 is the base version which comes with one 92mm fan and one 120mm fan, and the included fans are fine; not exceptionally quiet but not annoyingly loud. Still, I might replace both of them with Noctua fans to get the quietest possible airflow, and the 92mm fan will definitely not fit when I upgrade to the CPU cooler I plan on getting. Though Cooler Master included fans to appeal to customers who will use stock coolers and don't want to worry about aftermarket cooling solutions, they still have an opportunity to cater to more enthusiast consumers (who constitute a large part of the SFF community). Many SFF builders will either not need the included fans, or prefer to choose their own. They likely also prefer having near to mid-term future proof features. A version of this case without fans and a type C port, offered at a small premium, would still be a great deal.My unit also came with a minor defect - the metal frame (not sure of the correct term) of one of the USB ports at the top is not completely connected. The end of the metal frame is bent inwards slightly as shown in the picture. I haven't encountered problems while plugging and unplugging USB devices, albeit carefully, into the jack multiple times over the past couple of weeks, so I didn't deduct a star or try to get it replaced. I'm optimistic that it'll stay as-is and not get bent worse over time. If this is a problem in manufacturing, hopefully Cooler Master can address this issue.