Your cart is empty.
Your cart is empty.Give your chassis an instant makeover with Cooler Master’s Vertical Graphics Card Holder Kit V3! Supporting cases ranging in size from mATX to ATX, this remastered design allows unprecedented compatibility with various builds and setups. A PCIe 4.0 riser cable is included to assist the installation process and ensure high efficiency at uncompromised speeds. The GPU bracket can be toollessly adjusted up to 65mm towards the front panel, as well as up to 30mm towards the side panel for greater compatibility and flexibility during use.
Sicard
Reviewed in France on February 6, 2025
Pas très bien.La nappe n'est pas assez longue et ma carte graphique ne fonctionne pas correctement, peut-être trop puissante pour ce genre de produits.
Bres
Reviewed in the United States on February 21, 2025
Easy to install, sturdy, and minimalist steal construction. The 1st cable is grey and not purple in this model, but you don't see it, so I don't care
Eryz_Oh
Reviewed in Mexico on January 28, 2025
Sirve a la perfeccion tanto el braket como el cable para conectar la GPU tecnicamente serviria con cualquier gabinete al que le puedas retirar las bahias de expansion pero lo mas importante es que sepas que tu gpu no exeda el tamaño del gabinete dado que el braket le aumaneta unos centimetros.
Orlando Arroyo
Reviewed in the United States on January 2, 2025
The media could not be loaded.
Gosstragos
Reviewed in Mexico on September 4, 2024
The media could not be loaded.
Graeme S.
Reviewed in Canada on August 26, 2024
This thing is super sturdy and very easy to install. You’re able to adjust the distance between your side panel and GPU which makes it super convenient to make room for your mobo components and get your connector placement just where you want it. It can also move left or right parallel to your mobo. You can install it into the case and then install the GPU after also. I found that to be convenient as the last one I bought from another brand was just an absolute nightmare to install. It also put my GPU right up against my ram which I did not care for. This mount solved all those problems. I highly recommend it.
SAM
Reviewed in the United States on December 30, 2024
The Cooler Master MasterAccessory Vertical GPU Card Holder Kit is pretty awesome! It lets you mount your GPU vertically, which makes your build look super clean and unique. It's really sturdy and easy to set up, plus it helps with better airflow and cooling. If you want to show off your GPU and improve your rig's cooling, this kit is definitely worth it!
DankTank
Reviewed in the United States on December 28, 2024
Instructions were decent but not too clear, for my case I have a RTX 4070 TI super MSI expert and my CPU cooler is a small to medium sized air cooler. Maybe if you had a water cooled AIO instead you can move the mount up one slot and it will be fine but my space restrictions make that difficult. I had to do what other reviewers here have done and that's zip tie the mount on the bottom and back of the frame so that it can stay in place. The Riser cable and mounting hardware are good quality to my eye, but compatibility issues is what you can expect with this product depending on your circumstances. I bought this hoping I wouldn't have to buy a new case but this may be an eventuality.
Jerry
Reviewed in Canada on April 15, 2024
Bouught this mount because the NZXT mount for the H9 Flow is almost double the price. Overall it's rock solid. The white almost matches my case perfectly. Being able to take it apart and adjust the height made it easier to mount my 7900xt without having to take off my air cooler. Temps and performance in game were not affected at all. If anything my 4 m.2 drives are much cooler now having direct air flow from my 3 bottom fans.There are some downsides though. 1st unless you have a very wide case you won't be able to use your other pci-e ports on your motherboard. Capture cards, storage expansion cards etc won't fit with this mount. You can adjust the mount so there is a lot of space behind it, but that will push your graphics card against the glass, which you don't want to do.2nd, the included riser cable is fairly flexible, but the hole to pass it through is a bit awkward. A larger hole would make it a lot easier so you don't have to give it a tight bend.3rd, if you're using a 2 slot gpu there will be a large gap at the back of your case. It's not a huge deal, but they don't include any covers for it. However your PC's bracket covers will fit in them.
L M
Reviewed in the United States on July 7, 2023
I highly recommend this GPU holder, next to no questions asked.Bracket, Support & Positioning:VERY intuitive installation overall. Documentation is picture-based and easy to follow. I would consider this beginner-friendly and a great alternative to something from Antec, etc. As a general rule of thumb, familiarise yourself with the bracket before inserting your GPU - I was able to attach the bracket to the case, insert my GPU into the 2nd piece, and then slide the 2nd piece into the main bracket before securing. Very quick and in my opinion, easy to do.It also allows you to slide and position the GPU where you want it (i.e. more left or right, and more forwards or back). This was something unique from my original Lian Li bracket where my GPU was nearly forced againist the glass once I was able to get the dang thing in (more notes below on that). It supports my card exactly as I expect it to.Riser Cable & GPU Cabling:I was happy that this included the updated 4.0 cable as I don't have to perform witchcraft in my BIOS. It has some good length on it, while also being sturdy yet flexible. I'm very happy with it and the ease of installation itself was easy.For the power cables to the GPU, I did have to pull it out and extend to rotate around. If using a non-modular PSU and depending on your case, you will have to clean up your cable management if your power cable is not long enough. Do note that, case-depending, you will have a recess on the back of your case. This is normal and I found to be most welcome for a multitude of reasons that might be due to personal preference. Part of the back panel is also removable, which the instructions include as well.Packaging:Arrived securely and well-packaged. Bracket and sub-bracket were wrapped safely so no pre-assembly dings.Notes for clarity:I previously purchased the one specifically for my case (Lian Li PC-011D-XL) (the 3.0 variant) and it was ridiculously complicated / warped. I bought it again from another local store just in case and STILL had issues with it. I love my case but this has been a pain for a long time.This was installed on an E-ATX case and attached to an ATX motherboard, with a fully modular PSU that included pre-extended cabling. There are no cons because honestly, it works perfectly, even at this price point because you want quality for an expensive component. I'm not waiting in a 12 hour line again.
Hunter M. Billiu
Reviewed in the United States on March 8, 2023
I couldn’t find any reviews or experiences with the 4080 in a Hyte Y60 case using this Cooler Master GPU Mount. The vertical mount that came with the Hyte sat too low for my taste and wasn’t strong enough for these 40 series cards.This Cooler Master V3 mount is a great product and is very sturdy. In a typical ATX case, this thing is super simple to install and gives a clean look.While this Cooler Master mount probably does fit most cases, it didn’t just drop right into the odd shaped Hyte Y60. I had to weave some flat metal behind the case to get a sturdy grab of the mount. I also had to physically cut out one of the vertical slats on my case to allow the DP cables to plug into it. Normally you could simply slide the card forward but the 4080/4090 GPUs are so long that I had hardly any room to move it forward before it touched the front glass.Now that it’s in, I love it! But to all Hyte Y60 owners… if you aren’t handy with tools or simply don’t want to modify your case, steer clear of this mount as it’s not designed for this particular case.
Recommended Products
$28.00
$ 14 .99 $14.99