CMTOOL Fuel Injector Tester Universal Fuel Injector Cleaner Kit, DIY Fuel Injector Cleaner Tool (Grey)

Fuel Injector Tester Cleaner Kit & 3 Years After-Sales Service

• 8 Pulse Modes & Mode Lock: Press the "MODE SET" button to select the required pulse signal output mode. The LED screen will display the currently selected pulse mode, and the mode lock function can ensure test condition uniformity.
• Four-Wire Dual-Channel Design: Allows you to test each injector individually or both injectors simultaneously, helping you diagnose injector problems and quickly confirm stuck, leaked, damaged or burnt-out conditions.
• Reverse Polarity & Short Circuit Protection: This tool includes power input reverse polarity protection and output short circuit protection functions. In the event of a damaged injector or a short circuit at the pulse output, the power indicator light of the fuel injector cleaner will flash.

We provide 24-hour friendly product service and 36-month after-sales service for this fuel injector tester pulse tool to ensure your shopping experience. If you have any questions about this fuel injector test kit, please feel free to contact CMTOOL!

Comes with Four Adapters

These adapters easily clean almost all types of automotive and motorcycle injectors except cylinder direct injection nozzles.

8 Pulse Modes (Mode 1 - Mode 8)

Mode 0: Standby State, no output

Mode 1: Single Pulse Low Power Mode: the fuel injector tester will send out a pulse with a pulse width of about 255 milliseconds.

Mode 2: Short Pulse Low Power Mode: the fuel injector tester will send out 50 pulses with a pulse width of about 7 milliseconds.

Mode 3: Long Pulse Low Power Mode: the fuel injector tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds.

Mode 4: Continuous Pulse Low Power Mode: the fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds.

Mode 5: Single Pulse High Power Mode: the fuel injector tester will send out a pulse with a pulse width of about 255 milliseconds.

Mode 6: Short Pulse High Power Mode: the fuel injector tester will send out 50 pulses with a pulse width of about 7 milliseconds.

Mode 7: Long Pulse High Power Mode: the fuel injector tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds.

Mode 8: Continuous Pulse High Power Mode: the fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds.

NOTE: During the pulse output period, the MODE SET button is invalid, and the working mode can only be selected by pressing the PULSE button again to terminate the output.

Wide Compatibility:

1. The fuel injector cleaning kit works with any fuel pressure tester.

2. This fuel injector test kit can be modified for relay testing or solenoid valve testing, and other modifications should be carried out under the guidance of professionals.

Product Parameters

Easy-To-Operate Fuel Injector Tester Pulse Tool

1. Turn off the car's engine.
2. Remove the wire plug of the vehicle injector to be tested, then connect the red pulse output terminal of the fuel injector tester tool to the positive pole of the fuel injector, and the black pulse output terminal to the negative pole of the fuel injector.
3. Connect the red clip of the fuel injector cleaner tool to the positive terminal of the 12V car battery, and connect the black clip to the negative terminal of the battery.
4. Press the "MODE SET" key to select the desired pulse signal output mode, and the screen will display the currently selected mode.
5. After selecting the desired pulse signal output mode, press the "PULSE" key, the fuel injection cleaner will output pulses to the injector to be tested, and the signal indicator will light up when the pulses are output.
6. After the test is completed, if you need to repeat the test, you can press the "PULSE" button again. If you want to change the pulse mode, you need to disconnect the battery of the fuel injector tester and then reconnect it.

Packing List

NOTE

1. Wear approved safety goggles.

2. Only use this fuel injector cleaner in a ventilated place, do not inhale exhaust gas and steam from vehicles.

3. Before using this fuel injector cleaner, the car engine must be turned off.

4. Do not smoke or light a fire near the car.

5. Do not splash the fuel of the car on the hot engine parts.

6. Do not get close to any rotating (or moving) parts of the car, and do not touch any heat-generating parts of the car.

7. Do not short-circuit the positive and negative poles of the car battery.

8. Do not touch any auto parts with dangerous voltage.