Shopping Cart

Your cart is empty.

Your cart is empty.

ChillWaves Brass Air Hose Fittings, Hose Barb Fittings 1/2' Barb x 1/2' NPT Male Thread Adapter with Hose Clamp(6-PACK)

Free shipping on orders over $29.99

$13.99

$ 6 .99 $6.99

In Stock

1.Size:1 Barb X 1 Mnpt


2.:Pack Of 3


About this item

  • SIZE - 1/2" Barb x 1/2" NPT Male Hose Barb Fitting. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
  • MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
  • Use - The barbed end is used to connect flexible hose or tubing, the NPT end is used to connect to threaded pipe fittings, and can be used with PVC, PU, ​​rubber hose or tubing. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
  • WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65°F to +250°F (-53°C to +121°C)
  • NOTICE - NPT is a tapered pipe thread with a 60° taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.



Product Description

Product Description

77

  • Pipe fittings are the components in the pipeline system that play the roles of connection, control, direction change, diversion, sealing, support, etc. Applicable in many projects, the thread can be used for any water appliance, valve, instrument convenient Connection, industrial life is often used to butt the internal and external threads of the pipe or change the size and direction of the pipe diameter, widely used in water, oil, gas, steam, refrigeration, chemical, pharmaceutical and other industries.

22

  • The barbed end is used to connect hoses of the same inner diameter, and the hose clamp forms a tight seal between the barbed end and the hose to prevent it from falling off. The hex fittings are designed to be easily tightened or loosened.

33

  • Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.

33

  • The threads are smooth and clear, easy to install, and a sufficient number of threads are designed to ensure that the accessories are more secure after tightening and prevent loosening. To ensure a seal, Teflon tape can be used, just wrap a few turns around the threads.

TheCat1080
Reviewed in the United States on September 10, 2024
These were used for my lift pump on my Silverado specifically the PPE one. These threaded perfectly and they included very good clamps, i was able to get a tight seal and had no leaks. I would recommend these.
br549
Reviewed in the United States on August 10, 2024
Worked as it should.
Charles Bates
Reviewed in the United States on June 15, 2024
I liked the fittings. It is being used in an experimental flow measurement device.
Laura in Sarasota
Reviewed in the United States on May 27, 2024
Well machined with no sharp burrs. NPT threads are properly cut. I would buy again.
Ed, Edd, and Eddie
Reviewed in the United States on May 20, 2024
It works
Robin
Reviewed in the United States on March 19, 2024
Fittings were good, clamps were garbage. We literally threw them away and had to go to the hardware store to buy better ones
Bill
Reviewed in the United States on September 21, 2023
The brass is good grade and fits snuggly.
Bob - Just for You Today
Reviewed in the United States on November 9, 2023
Very good quality. Thicker walls than expected.