Shopping Cart

Your cart is empty.

Your cart is empty.

Ceiling Fan Remote Control Replacement, FAN-53T Remote for Harbor Breeze Hampton Bay Hunter, Replace 2AAZPFAN53T L3HFAN11T FAN-11T L3HFAN35T1 FAN-35T KUJCE9103 CHQ8BT7030T CHQ7030T UC7030T FAN-53T1

Free shipping on orders over $29.99

$15.98

$ 7 .99 $7.99

In Stock

1.Style:Receiver Only


About this item

  • Only Remote --- This FAN-53T remote is NOT universal. The item does not include a receiver or 9V battery, it's only a remote. This remote NOT have reverse button, and it works with FAN28R/FAN18R receiver. If your original transmitter looks different from this remote, please purchase a complete kit with a receiver in the store.
  • Ceiling Fan Remote Replacement --- This FAN-53T remote replacement for Harbor Breeze Hampton Bay Hunter and other compatible remotes that works at 303.9MHz. Make sure your original remote the same as the picture shows. Check the number on the back of your original remote, it need has FCC ID/Model: 2AAZPFAN53T/FAN-53T, L3HFAN11T/FAN-11T, KUJCE9103, CHQ7030T/UC7030T, L3HFAN35T1, FAN-HD. If your original remote works on a different frequency, it can not replace even they looks very similar.
  • Ceiling Fan Remote Control for Harbor Breeze --- This remote controller is designed for 3-speed ceiling fan to separately control your ceiling fan speed and light brightness. There are four buttons (HI, MED, LOW, OFF) to control the speed of the fan and off.
  • Fan Remote with Light Dimmer --- The green button is for dimming function, luminous feature of it can help you find the remote control in the dark. Light dimmer compatible with incandescent light bulbs and some dimmable LED lamps. Most LED/CFL lights are non-dimmable, and the remote only control ON/OFF function in this case.
  • Easy Installation with Wall Mount Holder --- Comes with a convenient wall mount holder for your ceiling fan remote control, ensuring easy access and a clutter-free living space. No professional help needed—set it up in minutes! Just need set the same DIP Codes on the transmitter and receiver.
  • Please NOTE --- This FAN-53T remote just can replace the remote with dip switches. If your original remote looks the same as the picture shows, and it is a learning type, then our remote control cannot be replaced. In addition, the thickness of our remote is 2.5cm/0.98'', if your original remote is thinner than this, our FAN-53T remote cannot replace yours.



4.2 out of 5 stars Best Sellers Rank
  • #7,298 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement)
  • #3 in Ceiling Fan Remote Controls
Date First Available September 1, 2022 Manufacturer Prichor Country of Origin China

Product Description

remote control for a hunter ceiling fan

Universal Ceiling Fan Remote Control with Light Dimmer

This ceiling fan remote control kit with light dimmer works most major 110V 3-speeds AC ceiling fans, compatible with Harbor Breeze, Allen Roth, Kichler, Hunter, Hampton Bay, Honeywell, Home Decorators Collection, Litex and other ceiling fan brands.

The green luminous button is for dimming, this button is made of fluorescent material, it can help you find the remote control in the dark.

This ceiling fan and light remote control has the function of dimming.

The light dimmer compatible with incandescent light bulbs and some dimmable LED lamps.

Most LED lights and all CFL lights are non-dimmable, light dimmer only supports the ON/OFF function in this case, and it may cause to flicker when using the dimming function.

Note: Not recommended for use with hugger style ceiling fan.

FAN53T remote control

FAN-53T Ceiling Fan Remote Control Replacement

This FAN-53T remote control has the FCC ID: 2AAZPFAN53T, and it working at the frequency 303.9MHz.

Check the part number on the back of your original remote, it need to have one of the FCC ID/Model numbers listed below.

FCC ID / Model:

  • 2AAZPFAN53T / FAN-53T, L3HFAN11T / FAN-11T, KUJCE9103, CHQ7030T / UC7030T
  • L3HFAN35T, L3HFAN35T1, 2AAZPFAN35TI, CHQ7202T
  • L3H2010FANHD / FAN-HD, L3H2014FANHD, FAN-HD5

These models of remote are working on the same frequency and have the same function.

If this replacement works on a different frequency than your original remote, it can not replace your original remote even they looks very similar.

Please make sure the FCC ID/Model of your original remote is suitable before purchasing.

hampton bay uc7030t

Ceiling Fan Remote Control for Harbor Breeze

It brings great convenience to our life !

It adds remote control compatibility to any fan.

This remote controller is designed for 3-speed ceiling fan to separately control your ceiling fan speed and light brightness. This RC-53T remote control have HI/MED/LO 3-speed and OFF for fan speed control.

Please note that this remote not have the Reverse button.

LIGHT/DIMMER button just controls the brightness of halogen and incandescent lamps On/Off/Dimming, it also compatible with some dimmable LED lights. Most LED lights and all CFL lights are Not Dimmable, and the remote only control the On/Off in that case.

easy to set up the code

remote control
Remote Control Electronics

Our remote's electronics is on the front of remote, if the remote control is not disassemble, the electronics cannot be seen.

Please check the above pictures. This is normal.

Just need to set the same DIP code of your original remote or receiver, and put a 9V battery, the remote can work.

Easy to Set Up the Remote Control

  1. Setting the same codes on the transmitter and the receiver.
  2. 16 different frequencies that can be set for the receiver and the transmitter.
  3. The default setting is 0000, and it is not recommended.
  • Tips: Remote control's 4 DIP switches are in the battery compartment (they are hidden behind the slot for the battery itself).
fan control remote

NOTE

1. If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.

2. If you have multiple ceiling fans in your home, please make sure that the PIN code settings are different between them, otherwise it is likely that the transmitter next door activates the ceiling fan in your bedroom. This will cause the ceiling fan to turn on strangely while you sleep.

package list

Package Includes

1 x Remote Control

1 x Wall Mount

2 x Screw

1 x User Manual

(NOTE: 9V battery is not included)

Specification

  • Input voltage: 110-120V
  • AC Frequency: 50/60Hz
  • Require Battery: 9V battery
  • Properties of Lights in Controller: Relay contact on/off
  • Transmission Mode: Radio Frequency (RF)
  • Radio Frequency Band: 303.9MHz
  • Remote Control Range: 60 ft

ToolmanJohn
Reviewed in the United States on March 9, 2025
Replaced an identical ceiling fan controller the light power button had failed to work anymore.It only needs a battery and the DIP switches changed to the same code as the old on, very easy to do.But this new one has a balky power switch and requires a significant button push to get the light on/off. Plus the 9 volt battery rattles in the remote, so I added a bit of folded paper towel to stop the rattle.Cheaper than buying an entire ceiling fan for the bedroom.
brian hall
Reviewed in the United States on March 8, 2025
Lost the controller to our ceiling fan. Don’t know how we managed to do that. I think it went the same place the socks do in the dryer. Ordered this one adjusted a couple of the toggle switches and worked perfectly.
Leslie
Reviewed in the United States on March 3, 2025
Works well, 3 speeds and a light dimmer.
Dalton R Ramsey
Reviewed in the United States on March 10, 2025
Works great for Kichler fan. Seems to be of good quality and at a great price!
Steve
Reviewed in the United States on March 10, 2025
Worked perfectly! Make sure to check the numbers on the back of the old remote to make sure it is compatible
PJ
Reviewed in the United States on February 6, 2025
My fan light now works perfectly. Easy to install.
Rman
Reviewed in the United States on February 1, 2025
This was a plug and play replacement for a 20+ year old Hampton Bay remote that no longer worked. The rubber conductive pads wear out over time and I couldn't revive them. This one even looks the same. Side note: I installed a second remote fan control unit in a different fan whose light switch had worn out. To my great surprise, the transmitter operated the other fan and not the intended one! Both were set to the factory default code, but I was astonished that the new one was compatible with a different make over 20 years old.
cozols
Reviewed in Canada on September 18, 2024
Three-month-old fan remote failed and had to be replaced with this remote. The setup and use were simple.
Marsha Engquist
Reviewed in the United States on September 12, 2024
Fans had been installed years before we purchased our home. The remote for kitchen was very difficult to operate. Found what looked like a perfect match and ordered. IT was perfect and life is now great in the kitchen
Recommended Products

$32.34

$ 16 .99 $16.99

4.5
Select Option

$9.99

$ 4 .99 $4.99

4.3
Select Option