I got this because I was in the classroom for way too many hours and sometimes I had wished I had a table to move up and use my standing height. I saw some automatic ones that had plug-ins and buttons but were expensive in my opinion. When I saw this one, I decided to give it a try and I absolutely love it. I can take it anywhere in my home and I can adjust the height. Heck, I've also tried it out with breakfast in bed. Every once in a while, at least for me, I have to retighten the screws at the bottom. Other than that, it is sturdy in my opinion and it's very useful for me or anything that I may need.

Nice and sturdy but you will want to check contents right after delivery for any damage. I unfortunately didn't open right away and when it came time to put it together, the top was chipped and damaged so I've gotta be careful not to scratch myself on the corners

الخامات جيده لكن تركيبه غير واضح وطلع فيه مشكله في ارتفاع الطاوله وانخفاضها قد يكون بسبب التركيب

Opened it right away when it arrived to put together. The first piece that holds things together, bolt 4 is totally smooth. It has no threads. The nut cannot screw on it to hold the column together. Incredibly disappointing. As most people do when they buy something, I really needed this right now.UPDATEThe tray is pretty easy to put together and very sturdy, perfect for a laptop desk around the house.Called the company, they don't have replacement hardware so sent me a whole new tray and said throw out the other one. What an awful waste, I went to Home Depot & got a bolt, I kind of wish I did that first but did not have a chance before calling. I did not open the replacement yet so hopefully it has no defective pieces.

I was looking for a table for sitting and for watching TV as for like a handicapped person cuz I'm a very large person. I sit higher than most people A regular table is fine but when you want something more comfortable, something where your height is what I was looking fo I was also looking if I happen to be very sick and them bed what is one of these table tops fit but over the bed with me in it that was really my big concern too I am kind of blown away how big it is. Height wise I think it's about the regular size of a hospital table top. If not, it's very close to me, however, however it doesn't till it does raise up pretty high. I was blown away with that and I was afraid being on a rug it would be hard to move or other issues and I'm having no trouble with mine at this time assembly. Yes you will have to put this together. If I can do it you can do it. Only little chip I'm going to give you is there's a little Pusg rode on the inside that you may have to push down a little bit to get your black handle inside the little opening you will have to wiggle it and jiggle it a little to get it there. That was my little hang up I installed that upside down handle. It's not a big deal you will need will need. I used a screw gun but remember not to ever tighten or strip the screws and then you will need a wrench or a crescent wrench to tighten the nuts and bolts I think a 7th grader could put this together. Maybe a little younger but for the most part it's very self-explanatory and instructions they give you I took my time. I did it under a half an hour I feel it's price wise. It was a good value. The shipment was pretty quick and awesome. Delivery person from Amazon delivered my package and with them getting it there but the way they handled it and delivered it to All access delivery point that other carriers deliberative it is a Friend of mine store runs a clothing store I left the plastic wrap on the table top while assembling even although I use my bed as a workstation to assemble it it beats one of them fold of tables that you can put next to a chair or a couch. But if you use one of those they're great cuz they fold up and you can put them out of your way. The cart is more like a piece of furniture. It will be always in the way of something but easy to move hey Sam, pretty sturdy and not too flimsy to tip over. It is big enough for a computer or laptop because it didn't be great for the kids. They play card games and stuff or to draw on or reading in bed? To playing video games and they could use that for their controllers and consoles empressed adults. We could do our work while we lay in bed or at a nice chair while we recline and relax and watch TV but still get our work done and for those who are like a mechanic in a garage it could be a good workstation for them next to a vehicle and they could put their clothes on it. I'm not saying you put 200 or 300 lb of tools on it, but however it would be great for just your regular tools or power saw it's just when you would love just to have a table on Wheels and be able to move it around in a work area because you could slide this under the car and put your wrenches and socket sets and your screwdrivers and you can do your basic tune-up of your vehicle. I mean you probably can put an alternator on your your table top if you that's what you're using it for. It's sturdy enough. I believe it could probably handle up 100 lb easy but that would probably be pushing it and I'm sure I can go on with ideas to maybe use one of these table tops for Best of luck to you people. I think it's a great value overall

I have a family member who has some bad periods. She has an adjustable hospital bed but she needed an adjustable tray table.Instructions are not easy to read. They still follow the industry custom of saving paper by making the instructions tiny combined with wasting paper by making it on shiny paper so thick it is almost cardboard. Hey, guys (and gals) out there in industry land! It won't hurt you to print on an ordinary 8½"x11" (A4 in metric). Don't bother with the shiny paper. No one is going to run to their friends, "You've just got to buy one of these! The instructions are on quality paper! I feel like I'm a member of the elite now."The statement that you can put it together with one adjustable wrench is not true. Get your cheap metric stuff out. You'll need a 15 mm. You'll need a 10mm or a 10mm socket or another 10mm wrench or a pliers or a locking wrench. You need a heavy duty Philips screwdriver.

The table size is great,(W&L) Just like in the hospital. The legs are strong overall a very good table. it's just a bit too high for my Mom. (Height) I can't lower it but sure can get higher if needed to. But overall so very nice and strong table.

The good: it’s cheap, assembles easily, arrived quickly, and works.The bad: cheap particle board top arrived damaged; the lift mechanism sticks;I needed something for a few weeks and this was inexpensive and works, but I wouldn’t buy it as a long term solution or a makeshift stand desk.

I have more a expensive bedside medical table, and read the reviews and took a chance on this one. I know a lot of people complain about putting it together. Well my husband who gets frustrated easily with fiddling/ badly designed items- he’s a tradesmen -put this together in five minutes. No frustration. Now he had done one before - a different brand, so he had a general idea what to expect. What to do. He had none of the problems other people have complained about. But I remember reading someone said you had to push something in or apply pressure to set screw in. Sorry I can’t remember the exact details, but hubby said he already knew that. So just read some of the comments for people’s advice on what worked. It doesn’t have the rubber ridge around the edges, which I wish it had, but I knew this when I bought it. I was on a budget. My old table which has it, was about $45 more than what I paid. I got this on sale. My husband surprised me though and said to definitely write a review. He says it’s far superior and in materials and build than the other table which really surprised me. The wheels/ locks are the same. But he said a whole lot of technical talk about why it’s better-summing it up that it’s just sturdier all around. He said instead of putting tiny light screws in like the last table, this one comes with long bolts and metal guides and he says it’s just completely stronger and better built than the other table. He says the handle on the side that gets the up-and-down movement of the table is better designed. I find it a little harder to push down and come up, but he thinks it’s superior and he would know. I sort of set my tables where I want them and I don’t often change them. This got to be on schedule, a few days more than 2 day shipping, and with no damage. Obviously it comes in a very big box and it might be tempting for someone if it’s left on the front step. We were able to get it once it was delivered. But it might be a little hard for some people to lift if they are disabled or not very strong. I managed to get it in the door, just. I hope that helps.

Was meant for my invalid husband who passed before I could use it. But I kept it any way. It’s a good product

We bought this table for my wife’s aunt who is in a long term care facility. It arrived quickly and was easy to put together. Great quality and works very well. I would recommend this for anyone looking for a hospital table at a reasonable price.

Las maiobras para uso de esta mesa están muy suaves y fácil de mantenerlos estables, mediante seguros en ruedas y palanca en posición de altura.Por su precio y calidad, la recomiendo como excelente producto y la volvería a comprar.

This table is so easy to put together, rolls easily even on carpet, and is super sturdy. I use it to keep my laptop on - it's like having a small desk for my bed.My only real gripe is that I have trouble adjusting the hight sometimes. I'm not very strong, my husband had no issues getting it unstuck after I raised it to it's full height. The handle that you squeeze when adjusting it was hard to install only because the instructions were a little confusing as to which way should be up. These are very minor issues that are mainly user created.