Your cart is empty.
Your cart is empty.nater kugar
Reviewed in the United States on March 7, 2025
Originally bought a Hipa brand carb kit but did not fit and was poorly machined. Got this kit and put on my ms250 and runs like new, great product and lots of stuff comes in the kit!! Highly recommend!!
Shirley
Reviewed in the United States on March 7, 2025
Worked right out of the box, all parts there to replace fuel system on MS250 Stihl saw.
James Byrd
Reviewed in the United States on February 7, 2025
Easy to install and a perfect replacement for the old Stihl 021 carburetor.
Ron
Reviewed in Canada on January 30, 2025
Got very thing that I needed to repair saw works great all parts fit.
AmyW
Reviewed in the United States on January 25, 2025
The hardest part was inserting the rubber grommet in the fuel tank. Started second pul and idled perfectly. Highly recommend
Customer
Reviewed in Canada on January 21, 2025
Replaced carb on a MS 250 and saw runs well. You will need to tune it to make saw run properly. You may have issues with fitment of rubber guard on saw that supposed to fit over idle screw ports.
Doug
Reviewed in Canada on August 5, 2024
the saw runs very well. The adjustment screws are in a different place so you can not adjust with the air filter cover in place
Elmo44
Reviewed in the United States on August 10, 2024
Parts fit and worked great with minor adjustments, air filter was to tall, other than that, no problems.
Emmanuel
Reviewed in Mexico on February 28, 2024
Funciono 4 días y de ahi empezó a afallar
Brian Harlin
Reviewed in the United States on December 16, 2024
Good quality and correct
DaniTrussell
Reviewed in the United States on April 11, 2024
Bought for an older Stihl 025. Start to finish about a 10 minute install for the carb only. Fired up on the second pull. Had to adjust the low idle about a half turn. High run was right on. Perfect fit. Way cheaper than OEM. Saw is running like new again!
Customer
Reviewed in Canada on March 25, 2022
Simply can't be beat for the price and apparent build quality.Ran perfectly right after install.The high and low oil fuel ratio adjustment screws don't match up with the OEM placements, they're too close together to fit into the rubber piece. I had to modify the rubber screwdriver ports in order to install the carburetor.
dkl
Reviewed in the United States on June 4, 2020
The fuel line is shorter than the original leaving your filter hanging in the middle of your fuel tank instead of the bottom.The fuel filter cannot be used with the original line because it is the wrong size to fit the original line diameter.The carburetor fits on the mounting bolts but the tuning screws don't line up withe the rubber boot for the saw making it difficult to tune. Even if you remove the rubber boot and plastic shield to tune the carb, it never tunes to make the saw run well. It runs, just not like it is supposed to. I went back to the Stihl brand carb purchased from a local power equipment shop for $35 and have it running like new again.The air filter is completely wrong and doesn't fit at all. It's much bigger than the original and if you use the intake manifold inlet that they provide, it doesn't fit on the mounting bolts.I didn't try the rest of the stuff in the kit because I lost all faith that it would work.
Recommended Products