Your cart is empty.
Your cart is empty.Product Description
Carburetor replaces WT-286
Package list:
- 1x carburetor
- 1x fuel filter
- 1x oil filter
- 1x ignition coil
- 1x air filter
- 1x spark plug
- 1x fuel line,
- 1x oil line,1x gasket, 1x intake manifold
You will get as picture shows
Compatibility:
Compatible with Stihl
MS210 MS230 MS250 021 023 025 chainsaw
Please kindly check the models and pictures provided to ensure fitment.
- Carburetor replaces WT-286
- Air filter replaces 1123 160 1650
Fits Stihl MS210 MS230 MS250 021 023 025 chainsaw
WT-286
Scott
Reviewed in the United States on March 3, 2025
As described. Works well with no issues
Lt Dan
Reviewed in the United States on March 11, 2025
I am always skeptical of non original equipment. Read reviews. Kit was complete. I only installed the carb. Works so much better than prior carb that was clearly clogged. Background on this Stihl 210. It was at dealer a year ago and they installed new carb for $170.00. It has never worked well at high speed. This took less than 15 minutes to install and I am very happy. I am not a mechanic but pretty handy.
Keith Pennington
Reviewed in the United States on January 5, 2025
I work on several small engines, two cycle and four. I am constantly ordering parts for small engines. I have had several two cycle carbs that I have been somewhat displeased with. When I ordered this carb I didn't believe that all the part would work as suggested but let me tell you, this is the best product that I have ever ordered. They will be my permanent go too place as of now. Excellent product!!!!!
frank Montazuma
Reviewed in the United States on January 26, 2025
it gives you everything you might need !
Darren MR
Reviewed in Canada on September 28, 2024
My Stihl MS230 saw had compression and spark but it sputtered and would not idle even after I cleaned the carb.I tried this replacement carb kit as I also needed the filter. The coil would be a bonus.The good: fitment of the filter was right. Also I got the chainsaw to fire right up and idle with the new carb.The bad: the delivered coil cannot fit in the MS 230. More importantly, the carb high jet can't be adjusted so that the high jet provides proper fuel. The saw quickly bogs and is starved for fuel. Yes, I replaced the impulse line and fuel line.
Steven
Reviewed in the United States on August 27, 2024
This product is great filter fits good excellent value for money. Alignment is spot on ony thing I had was try breather was smaller then the original. Other then that good Quality.
Customer
Reviewed in Canada on December 29, 2024
le kit correspondait à sa description.
Qv
Reviewed in Canada on December 19, 2024
Great value and worked perfect without have to adjust anything. Bolt on and go
CarolB
Reviewed in the United States on November 19, 2024
Everything fit and the saw works well!
Leif
Reviewed in the United States on October 19, 2024
I was given a 025 that wasn’t running, while already having a running ms250 i robbed my good working ignition coil and carburetor. 025 fired right up. Part arrive and i figured i would just use the new parts in the ms, ignition coil doesn’t fit well enough to keep the rotor from rubbing. Swapped everything around again and got the parts to fit the 250. I could never get it to fire, adjusted the carb multiple times, checking spark it was erratic and weak at best. The new coil seemingly tested out just fine via my multimeter, it just doesn’t seem to be high enough quality to keep a consistent spark.I suggest looking elsewhere
Scott
Reviewed in Canada on April 20, 2024
Too little alterations to make it work on a MS 170 then you can adjust your high low RPMs give a little more power out of 170 and if you have a 250 you have spare parts left over for it took about eight poles to get it primed up did two adjustments after it was warmed up and runs really good now highly recommend
Jon A
Reviewed in the United States on August 19, 2023
Bought this to replace the worn out factory carb on my near 30 year old 025. Did a tune up while at it. The carb was great. The high screw needed tweaking to get to the factory WOT RPM, the low screw needed a little more too, it stalled returning to idle. After some adjustments not bad at all. Put the new plug in, after gapping it. It was close to .020 out of the box. Not bad. Didn’t use the coil or lines or wires yet. I did use the intake manifold and filter, which I had an issue with. The intake or filter is too tall by a mm or two. I can’t put the cover back on the saw. When I put back on the Stihl filter, the cover goes on like it should. This filter, it goes on with some force but you can tell it’s not lining up right. Otherwise it’s a decent kit.
Ed McGovern
Reviewed in Canada on November 1, 2023
Ignition coil wasn’t exactly like the original but it did fit ok.
Recommended Products