Your cart is empty.
Your cart is empty. Micro-SD TF Memory Card Kit Male to SD Female Extension Soft Flat FPC Cable Extender 25cm
You can extend the TF card slot from inside to outside
And Then connect the SD card for the mobile & Tablet
The memory card not included
Soft Flat FPC Cable
Length: 25cm Approx.
John Dacey
Reviewed in the United States on February 2, 2025
works as advertised. i use this on my ender 3 pro 3d printer. the sd slot on these suck to use if you dont have fingernails...hence, this item is a life (and finger) saver. highly recommend.
Jason Bilow
Reviewed in the United States on February 2, 2025
Reads like it should
stoppy
Reviewed in the United Kingdom on January 18, 2025
My 3d printer has micro sd card reader which is quite fiddly. Used this with a standard size sd card. Works perfectly
Philip Turnbull
Reviewed in Canada on May 15, 2024
great for inserting micro sd cards and lessens wear and tear on slot
jan moorlag
Reviewed in the Netherlands on November 22, 2024
mijn redder in nood, wist niet eens dat het bestond maar ik gebruik hem nu voor mn laser en probleemloos tot heden
David S.
Reviewed in Spain on November 22, 2024
Lo compré para una impresora 3D, porque la ranura de micro sd tenia mal acceso y con este adaptador la puedo usar mejor. Lo até con una brida en una de las partes superiores de la máquina y a funcionar.0 complicaciones: Sacar del embalaje, conectar y funcionar.La ranura es para sd normal, pero para mi no es ningún problema, porque casi todas las micro sd vienen con un adaptador
HAL 9000
Reviewed in the United States on August 29, 2023
This page just asked me to rate this for "Adhesion". I find that funny since one thing that struck me is that, unlike the last SD card extender I bought from another company, this one didn't come with any double-sided tape, Velcro, or any sort of way to mount it.Like I said, I had bought one of these from another company previously and it worked just fine. I went to buy one for another project and liked the delivery time for this one better so bought it instead. That turned out to be a mistake. This one wouldn't work with my Libre Le Potato (Pi clone), my Raspberry Pi 4b, my TI-99/4a FlashROM 99 or an SD to IDE device. A voltage warning is given on the Le Potatoe, there are read errors on the Pi 4B, the FlashROM doesn't acknowledge it and using it with the SD to IDE device causes multiple read and write errors.I see there are good reviews for this. Maybe the one I got was just a piece of junk, regardless. One star.
Candace Dembowski
Reviewed in the United States on June 7, 2023
Other than the sd card adapter being able to slide out it’s a great product to help on my longer lk5 pro
Phearly
Reviewed in the United States on October 10, 2023
I bought this in order to relocate the USB card socket on my Ender3v2 3D printer. In the printer's stock form it uses a micro SD card. To me using these is a bit fiddly, so in order to be able to use regular-sized SD cards & to minimize the wear & tear on the printer's own SD card slot, I decided to use this extension cable. I printed out a mounting bracket to mount this to the printer & so far it is working ok. This was the 2nd cable that I purchased since I think that I pulled a bit too hard on the 1st one & the ribbon cable pulled out of the reader section of the cable.....It was my fault for not taking more care, but maybe they could be built a bit sturdier?
Brooks W
Reviewed in the United States on April 2, 2023
This worked right out of the package. No issues and it is doing what I wanted it to do with my 3D printer. Fast delivery. No issues at all
Sergio
Reviewed in Mexico on February 22, 2022
Funciona perfectamente en mi impresora 3D Ender 3 Max, sin presentar fallos ni falsos contactos, aun que lo monte en una cubierta especial oara que no se mueva... Funciona tanto con SD, como con las micro Sd montadas en el adaptador SD, alargando el tiempo de vida del lector de la impresora 3D.
Norm N.
Reviewed in the United States on November 3, 2022
The cable attachment to the leads fell off within a week. Had to invoke warranty replacement. Because it's necessary to periodically remove unit from the printer I had to add blue tape to secure the cable to the sd insert.
Dads Hobby Room
Reviewed in the United States on April 1, 2022
Just a quick word to say, finally an extension that works in my 3d printer and let me add that I do not have to shut down my Neptune 2 3d printer to change the SD card, simply return to the main menu, swap the card , give Just a second and it's ready to print from the next card , yep happy guy here 😀
Recommended Products
