Your cart is empty.
Your cart is empty.Product Description
About Taps
Straight flute design, made of 6542 high speed steel. It is used to process threads of various through holes or shallow blind holes. Can process copper, brass, A3 steel, aluminum, cast iron and other materials.
Generally used in conjunction with tapping machines, integrated bench drills, CNC lathes, machining centers, etc. Manual processing is also possible. When operating, control the speed according to the hardness of the material, the higher the hardness of the processed product, the slower the speed.
Recommended feed rate:
Hard steel: 5-10m/min, cast iron: 8-10m/min, ordinary steel: 6-15m/min.
About Dies
Made of alloy tool steel, hardness and wear resistance. Used to repair external threads. When in use, the conical locking hole of the die is aligned with the screw of the wrench and tightened. The conical keyhole has a strong locking force and is not easy to loosen.
Suggest:
Appropriate lubricating oil should be added to the die-cutting edge when cutting, It is to be reversed every 1/4~1/2 turn to facilitate chip discharge from the chip hole.
Mike
Reviewed in the United States on February 3, 2025
The quality is good. I bought this to clean up another product that had very sloppy threads.
Ty
Reviewed in the United States on February 12, 2025
Worked great
Momof5
Reviewed in the United States on January 4, 2025
I'm not a professional but I was able to fix the threads on my stripped engine mount bolt hole. I'm a satisfied customer.
James Morales
Reviewed in the United States on January 29, 2025
Cheap and sharp, helped die cut a stripped bolt for my Nissan. Didn’t realize my tap and die set didn’t come with m14, glad I was able to pick this up for really cheap
Ryan Grossman
Reviewed in the United States on January 15, 2025
This is the correct size for cleaning up the welded nuts on the front and rear frame horns on a D40 and D41 Nissan Frontier. Worked like a charm.
John Swanger
Reviewed in the United States on September 27, 2024
I had, like a dummy, cross-threaded one of the studs on my wife's wheels when putting everything back together after a CV Axle replacement. It wasn't so bad that it was irreparable, but both the nut and the stud seemed like they were done, with the nut not threading onto any of the other studs easily or the stud allowing any of the other nuts to tighten down correctly. So I ordered a heck of a deal on a Project Farm reviewed Craftsman set, and wouldn't you know it, it didn't have the size that I needed in it. It had something that almost worked, but was just a hair too large to fix the threads. So, I took a chance and ordered this little set knowing that it was the correct size. It took 2 passes through the nut and on the stud to fully clean them up, and the nuts now have a little bit of slop between them and the damaged stud, but now I can safely tighten down the nut onto that stud and not have to worry about it coming loose while driving.
Raul M.
Reviewed in the United States on June 12, 2024
Kind of hard to find size. Used it to clean up some threads on a bike. Worked just as expected
BShade
Reviewed in the United States on March 27, 2024
I was pleased with the minimal packaging and the tool met my need of clearing out the threads on some rusted frame welded nuts.
John Wetzel
Reviewed in Canada on February 13, 2023
All I could have asked for. Worked fine. You wouldn't buy these as a high-volume production tool, but did the job perfectly.
Recommended Products
$43.99
$ 19 .99 $19.99