Your cart is empty.
Your cart is empty. Features:
2-in-1 oscilloscope multimeter
Handheld graph scope multimeter Rechargeable color display voltmeter
True rms digital multimeter tester
Measures capacitance, ac and dc current, diode and continuity
Measures ac and dc voltage, resistance, v-alert and live wire check
Tested data is saved and exported to your computer
Low battery indication with flashlight design
Specifications:
MAX Display: 6000 counts
Screen Size: 2.8 inch
Bandwidth: 10MHz
Real-time sample rate: 48MSa/s
Input Impedance: 1MΩ,@16pf
Maximum Input Voltage: 300V (DC+AC peak)
Horizontal SEC Range: 100ns/div -20s/div
Vertical Sensitivity: 20mV/div -100V/div
DC Voltage:
60mV 0.01mV ±(1%+5); 600mV/6V/60V 0.1mV/0.001V/0.01V/ ±(0.8%+3); 600V 0.1V ±(1%+5)
AC Voltage:
60mV 0.01mV ±(1.2%+5); 600mV/6V/60V 0.1mV/0.001V/0.01V/ ±(1%+3); 600V 0.1V ±(1.2%+5)
DC Current: 6A/10A 0.001A/0.01A ±(1.2%+3)
AC Current: 6A/10A 0.001A/0.01A ±(1.2%+3)
Resistance:
600Ω 0.1Ω ±(1.2%+5); 6kΩ/60KΩ/600KΩ 0.001KΩ/0.01KΩ/0.1KΩ ±(1.0%+3);
6MΩ 0.001MΩ ±(1.2%+5); 60MΩ 0.01MΩ ±(1.5%+5)
Capacitance: 99.99nF 0.01nF ±(5.0%+20);
999.9nF/9.999µF/99.99µF/999.9µF 0.1nF/0.001µF/0.01µF/0.1µF ±(4.5%+5);
9.999mF/99.99mF 0.001mF/0.01mF ±(5.0%+10)
Diode: Measures diodes within 3V
Continuity: Yes
V-Alert(non-contact voltage detection): Yes
Power: 2000mA battery (rechargeable)
Size: 187 x 74 x 40.5 mm
Weight: 269g
Package Includes:
1 x Handheld Oscilloscope Multimeter
1 x Test Leads
1 x Carrying Case
1 x Charging Cable
1 x User Manual
musman50
Reviewed in the United States on March 1, 2025
Thus far seems like a great tool for the price im a bit of a newbe but i guess if i can figure it out as a newb that says alot lol seems like a great tool it is rechargeable comes with a nice case and works as it should
LB
Reviewed in the United States on January 22, 2025
Fairly intuitive to setup and use compared to most low cost scopes.
David Turbeville
Reviewed in the United States on January 20, 2025
The best of both worlds. A great multimeter and a two challen scope. I put a magnetic strap on it so it's all set for hands free measuring.
Bbg
Reviewed in the United States on September 14, 2024
For the price of this particular model I really don't know if you can do much better. Yes the oscilloscope uses the regular test leads instead of an actual bnc probe, and it obviously isn't going to be as functional as some of the higher priced scope meters, but the dmm was plenty accurate for most things you're going to use it for, and the scope had no problems at all checking my fuel injector signals. If you're looking primarily for a dmm and only need the oscilloscope for the occasional lower frequency testing I'd say it's a good buy for $40.
3d printer guy
Reviewed in the United States on September 13, 2024
Great scope and multimeter capabilities
Jack
Reviewed in the United States on September 10, 2024
It works OK. The ui is a pain to manually select the mode. The meter is slow at best. The probe push up into the bottom and fall out constantly. The scope is pretty much a gimmic. No bnc. Just probes so you can't expect much there. The worst part is you have to remove the back cover to expose the charge port and "calibration" test points. If you try to use the meter while charging you can't. It just says usb mode. Have to completely turn it off. It's a very very basic meter at best and really not an oscilloscope at all . Maybe catch a few automotive signals if you're lucky and they will be noisy. Basixally, Don't buy it for the scope only and don't buy it for the meter only. So....
Alex (Los Angeles)
Reviewed in the United States on August 14, 2024
+ The display is easy to read from far and in dark environments+ The probes are super sharp and gold-plated+ It comes with a sturdy carrying case+ It tests LEDs by lighting them up and shows the voltage they need+ The oscilloscope can handle higher MHz than other scopes in that price range+ It can also drop to 1Hz, turning it into a voltmeter with a 160 second graph of AC/DC up to 300V+ It has NCV and a flashlight+ It can save screenshots of both waveforms and meter readings+ The battery life at 30% brightness is more than 10 hours in multimeter mode and 7+ in dso mode+ It is serviceable, the case uses screws, the fuse and LiPo battery can be replaced without desoldering- The silicon skin is slippery- The waveform generator and usb charging port are underneath behind a trap door that's difficult to open as there is no slot to lift it and the silicon skin is in the way (I added a piece of tape folded in a "T" to make a pull handle)- It can't be operated on USB power, only on battery- No BNC ports so regular oscilloscope probes can't be used (but the tips from regular probes fit)- There's no information on where to get firmware updates (mine has FW 2.1.12 which works fine)- The button press beep can't be turned off- There is no stand nor hook, but the viewing angle on the display is very wide so it's not that big of an issue. It also doesn't have probe holders but the carrying case keeps them tidy.Overall it's a very useful tool, it works fine, is well made and doesn't feel cheap, so for $30 I think it is a real bargain.
Von Mac
Reviewed in the United States on November 5, 2024
My first oscilloscope. Very impressed with the functionality and rechargeable battery.
Recommended Products
