Shopping Cart

Your cart is empty.

Your cart is empty.

breadboard Set Prototype Board - 6 PCS 400 Pin Solderless Board Kit for Raspberry pi and Arduino Project

Free shipping on orders over $29.99

$8.88

$ 4 .99 $4.99

In Stock
  • 100 % SATISFACTION GUARANTED: Consistent hole alignment; Easy Pin Insertion; Refund if you are not happy without any reason
  • NO WORRIES ABOUT CIRCUIT FAILIER: Spend the better part of your time on Creativity and fun DIY rather than debugging the unknown frailer of the poor breadboards
  • PIN HOLES ARE EXQUISITELY LINING UP: Without any intermittent connections; Holes are properly cut out;
  • PERFECT SET FOR YOUR EXPERT PROTOTYPING : A great combination for your needs; Snap together easily in groups; Excellent for Arduino Proto Shield
  • PACKAGE COMPONENT: 6 X 400 tie-points



Product Description

Started in 2018, DEYUE is a technology company that providing assistance for you to learn electronic courses and do electronic experiment.

181715

Dimensions of holes

Distance of holes: 2.54 mm / 0.1 inch

Size of holes: 1 mm / 0.04 inch

Depth of holes: 8 mm / 0.32 inch

Quantity of holes: 400 pcs

181720

Electric conduction of holes

Holes of 1a,1b,1c,1d,1e are conductive. Holes of 2a,2b,2c,2d,2e are conductive. Etc. Holes of 30a,30b,30c,30d,30e are conductive.

Holes of 1f,1g,1h,1i,1j are conductive. Holes of 2f,2g,2h,2i,2j are conductive. Etc.Holes of 30f,30g,30h,30i,30j are conductive.

There are two sets of positive electrode holes. Each set of positive electrode holes is conductive.

There are two sets of negative electrode holes. Each set of negative electrode holes is conductive

181721

Fixing the breadboards

The breadboards can be pasted and fixed to objects by tearing off the release paper on the back

181722

Connecting the breadboard

The breadboards can be connected to each other.

181723

Using the breadboards

The breadboards are used for electronic components with pins and do not require soldering.


electronics_guy_77
Reviewed in Saudi Arabia on January 15, 2025
It was good but the connectors don't go in as easily.
Glen Hayashibara
Reviewed in the United States on September 10, 2024
Works perfectly fine for basic circuits schematics, I used this for my college electrical circuits lab and it works really great for making a bunch of different small circuits. What I really like about these breadboards is how they can be put together so you can have a larger breadboard to use, but you’ll need some extra wires if you want to connect their GND and positive rails. But other than that these work perfectly fine, and I like how it comes a good multipack so that you don’t have to worry later on that you need to keep ordering more breadboards because you have flexibility in your options of configuring these breadboards. I haven’t tested the adhesives on the backs of breadboards yet, but I assume they’re pretty strong as I sometimes peels of the wrapper and it feels fairly sticky. If you’re needing some breadboards for some basic circuit making then I would definitely recommend this multipack.
Tom Szkut
Reviewed in Canada on July 28, 2024
This is the second package that I have purchased. They are of high quality and are well labeled. I use them for prototyping electronic circuits and have proven to be very dependable. They snap together for scalability. I recommend this product for any electronic hobbyist.
LazyShopper420
Reviewed in the United States on February 17, 2024
These little breadboards are perfect for the little projects I'm always fooling around with. This features nice small footprint with detachable power rails in case you need to make things just a little smaller.The clips seem to be quite sturdy if you want to expand your board as well.Easily the best choice for little projects, and I'll definitely have to buy again.
Matt
Reviewed in Australia on November 17, 2024
Not only good quality but allows one to increase the prototyping area as required.
Jerry Rutherford
Reviewed in the United States on October 7, 2024
I like these... If I need a larger circuit, I can clip them together to make whatever size I want. If web links were allowed here I would show off some of my projects... they work well, and there is another seller on Amazon who has circuit boards the same size... so I can transfer my circuits for a permanent version.
Jack
Reviewed in the United States on October 15, 2024
Nothing outstanding about this, it does everything it's supposed to as well as you could hope it does. No issues with stuff staying in the board, and the size is nice and compact. Always nice to have breadboards around for electronics.
Miguel Caballero
Reviewed in Mexico on April 28, 2024
Excelente producto y es formidable como.lo puedes usar , ya que lo puedes armar como tu lo requieras.
David
Reviewed in the United States on April 24, 2024
I bought these to tear apart for a custom breadboard I'm making to fit the BULKY ESP32 devboards. The "pin clips" match with the other breadboard I was taking from and I had no problems with those either. Very solid construction, although the metal bits were slightly more difficult to remove due to their low exposure, which would be a plus for standard use.
Randy Todd
Reviewed in Canada on March 7, 2023
Excellent breadboards for my projectsI can save my projects with out taking them apartSome of the holes are hard to insert the wires
Jenna Castellanos
Reviewed in the United States on December 10, 2023
They are your standard breadboard with power rails, a gutter, adhesive bottoms, and interlocking bits. I've had the displeasure of using terrible boards that won't let your components go. These do not do that. I popped in my ESP32 38-pin dev board. It just barely fits the width with one row on either side, stays in and is reasonably easy to take out. They are good. I will be purchasing more of these when I need them. I do wish they offered larger sizes though
George
Reviewed in the United States on April 21, 2023
Very pleased with these prototype boards. Holes are spaced properly for most ICs and dev boards such as arduino and Raspberry Pi. For larger projects the boards can be joined together in an endless number of configurations using the pins and slots along the edges. Very reasonable prices and great materials. Also the internal clips hold wires and or components snugly, but just enough to ensure good electrical contact; parts can be easily removed when needed. I use these for almost all project prototyping.
John A
Reviewed in the United States on October 7, 2022
I use these for prototyping and testing new circuits. This particular brand dosen't hold really thin wire leads on 1/8 watt chineese resistors Great buy for the price anyhow. I'm not sure whether other brands would be any better. Solution is buy 1/4 watt resistors or stick a wire jumper in the same hole on 1/8 watt ones. These, as well as other brands, are not meant for building permanent circuits. The are only meant for a quick hook up to try something before building a permanent setup on a printed circuit board or wire wrap circuit.
Recommended Products

$22.89

$ 9 .99 $9.99

4.9
Select Option

$49.00

$ 24 .99 $24.99

4.6
Select Option

$23.99

$ 10 .99 $10.99

4.5
Select Option