Your cart is empty.
Your cart is empty.From the Manufacturer
For use w/ routers that use tool-free templet guide adapter system - Features: for use w/ Bosch routers that use tool-free templet guide adapter system * Allows use w/ Porter-Cable, Black & Decker, or any similar threaded templet guides w/ older Bosch routers - Specifications: Part Number: RA1100, Used on Model No. : 1613 / 1614 / 1617 / 1618 / 1619EVS series routers & bases.
Kunde
Reviewed in Germany on January 7, 2024
Der Adapter passt gut in die Oberfräse. Allerdings muss etwas an der Absaughaube abgeschliffen werden, sonst lässt sich das Teil nicht montieren.Super Teil!
A Punter
Reviewed in Australia on October 30, 2023
A bit expensive.
Richard Thorne
Reviewed in the United Kingdom on January 20, 2022
This allows me to perfectly use my 30mm dutchman set which was designed for porter cable router base plates.
Gerard
Reviewed in the United States on August 17, 2021
I bought a new open box Bosch 2.25 hp router, the only part missing was the template guide adapter. Works great, now I can use with my dove tail jig.
Tbabij
Reviewed in Canada on March 4, 2021
Great addition to my 1613EVS Router. The adapter enables me to use everyday router guides instead of harder to find Bosch guides.
Alain SCOHY
Reviewed in France on October 22, 2021
Bague de copiage défonceuse
DAC
Reviewed in the United States on January 9, 2020
Bought this so I can use threaded template bushings from different suppliers rather than the substandard press-fit bushings that came with my Bosch router. It works well enough with quick change bushing adapter on the router and Powertec threaded bushings. There is a minuscule bit of play between the bushings and this adapter but easily overcome by tightening bushing threads and use of centering cone. Overall finish is poor but in line with the other Bosch bushing components and inline with price paid. I have only 1 router so okay with making some compromises in getting it to do everything. I like my Bosch 1817 router a lot but Bosch’s weakness in the template bushing area means my next (and smaller) router will unfortunately not be Bosch.
substrate
Reviewed in the United States on August 27, 2018
Background:I purchased this adapter in order to adapt over to other guides. Specifically, I purchased a porter-cable guide and lock nut that are used for routing shallow and deep mortises so I could install Soss invisible hinges in doors and door frames in my home that I'm currently renovating.Thoughts on the Bosch Adapter:This thing is potentially a money saver when you want to use other guides. Who wants to buy 3 or 4 different routers because of compatibility issues, right??? The problem with some adapters is fit. The adapter I received fit in the machined slots but had movement from side to side. Not good. I then tried my father's adapter (same adapter) and zero slop. What the??? Just a heads up.Is this adapter bad? Not at all. Just know that whoever is manufacturing these for Bosch is not holding to exact dimensions. Maybe a bad batch?
KTK
Reviewed in the United States on December 22, 2015
Perfect fit on my Bosch router. This makes adapting to my router templates easy. I can now use my Porter Cable dovetail jig with no problems. To install on my Bosch router there is a spring release lever on the top of the router base that you pull sideways allowing you to slip the template guide in. The adapter locks in place once you let go of the lever.
B. Roth
Reviewed in the United States on March 29, 2014
This is the part you need to use PC template guides on PC dovetail machines. You do not need the Bosch PR010 (or a centering pin). Remove the base plate, seat the lock ring (see below) in the adapter, seat the adapter in the router and reinstall the base plate. Now, you are ready to use your nifty new palm router, but suppose you have lost the template guide that came with your PC dovetail machine. if you buy the PC 42000 9 piece template guide set, none of the guides, in particular the 5/8 OD guide will work with the PC dovetail machine templates. The "distance past base" is too long, i.e., the cylinder will extend below the template. You will need to machine the guide to slightly less than 1/4 inch FROM THE BOTTOM OF THE ROUTER BASE PLATE. I did it easily with an angle grinder cutoff wheel, but I measured 1/4" from the base of the guide. Once I screwed it in to the mount it extended only 1/8" from the base plate. Enough, but making it more likely to jump the template and causing all sorts of bad things. If you are just looking for a guide for your PC template, buy the PC 42046 guide and the PC 42237 lock ring available through amazon, but not prime.
DWFree
Reviewed in the United States on December 17, 2014
A must have Bosch router accessory. This part comes as part of the Bosch template guide set, but comments are pretty negative about Bosch's template guides. This, along with the RA1125 adapter, allow use of the common threaded style template guides made by many mfr's. I use it with a 1617EVS, which has been an excellent router (I have 2, one in a table and one for hand held). Be sure to get a base plate centering cone as well (different mfr's will work) so the bit is centered in the template guide.
Carol Johnson
Reviewed in the United States on December 13, 2013
Great brass quality.Fits my Bosch router, because it's all Bosch.I Love Bosch tools.I have a planer that's really great too.And the 12v oscillating cutting tool with attachments.Bought more batteries. Good power though.We've put them to the test.Nice assortment.Nice case. Came quickly.A must have. All Bosch, All Good.
Stephen Ruback
Reviewed in the United States on January 14, 2011
The router kit did not include this. Several guide kits will fit this perfectly and make installation and removal almost like magic easy. The one thing that should come with it that does not is the centering guide. Anyone who buys or has a Bosch router kit will find this indispensable if you plan to use template guides. If you have a router and not the template guides, you are missing a large part of the functionality of the router.My daughter bought the Bosch router kit last year. I found this adapter on the internet and gave it to her for a present, along with a set of Porter Cable guide bushings. This year I visited, and we used it to build a custom door set for her barn.Very slick, even though virtually undocumented.
Recommended Products
