Your cart is empty.
Your cart is empty.Product Description
Who we are and What we do ?
BLCH was a manufacturer , that produce and sale pneumatic components over 20 years. We offer more than 10,000 models of pneumatic products and provide automation solutions to customers worldwide.
detail of air filter
Preparation
1. Before installation, please clean up the dirty inside the connecting pipes and joints , and avoid to carry into the air system.
2.Please make sure the Max working pressure 10bar(145PSi) can meet your needs.
Double filtration
High precision pressure gauge, Clear calibration to reading easily
Dial Reading
Install the gauge on the body tightly
Check that if the pointer rotated smoothly
installation:
bracket and screws
jeff
Reviewed in the United States on March 8, 2025
Good product!
R. C. Smith
Reviewed in the United States on February 6, 2025
Works well as a wall mounted in line application. Too large to be mounted on the tool. Good quality construction, and easy to use. Good value for the price.
Raymond Wakat
Reviewed in the United States on February 24, 2025
The regulator on my compressor was leaking. After replacing with this my compressor is back in operation.
Customer
Reviewed in Canada on September 16, 2024
travail tres bien
Customer
Reviewed in Canada on August 13, 2024
Bought this to replace the regulator on an air compressor. Had to buy a longer connecting nipple in order for the regulator to clear the tank on installation, but other than that, the new regulator worked great.
bullit-hed james
Reviewed in the United States on May 5, 2024
It is easy to use and works as it should. I use this with the latching air stems air trucks. To do air pressure on semis and trailers. Took five minutes of holding an air truck on each tire And has made it into I spend 45 seconds. Putting all 4 locking air chucks onto the tires. And walk away for 5 to ten minutes. Don't have to worry about the tires blowing up
KcKerry
Reviewed in the United States on December 31, 2024
Took a second to figure out the knob control but anyway works great on my double tank compressor.
Barkfire
Reviewed in the United States on December 21, 2024
I was surprised with the quality of this product for the price I paid. I am very satisfied and would recommend this to anyone that needs a nice air regulator.
Customer
Reviewed in Canada on November 6, 2024
The regulator is excellent. The diagram (pictures) showing the input and output ports is wrong. The ports are actually opposite to the picture. Look for the tiny embossed arrow next to the input port (hard to see).
Howard D. Gassett
Reviewed in the United States on November 16, 2024
I ordered the first one and it leaked around the adjuster knob. Amazon REPLACED IT BUT THE SECOND ONE LEAKED IN THE SAME SPOT!!! I would not recommend this item.
Gilles Boivin
Reviewed in Canada on October 20, 2024
La piece est de bonne qualité.Par contre elle n'est pas désigné pour mon compresseur.
mungo544
Reviewed in the United States on May 13, 2023
Appears to be very high quality, however because of the size of the blue knob I couldn't spin the valve on my compressor without taking the valve apart. If you need to do this here are instructions: 1) Unlock the blue knob by lifting gently until you hear a click. Turn blue knob counter clockwise until it stops 2) Remove four philips head screws. 3) carefully lift top half off the valve. There will be a spring, a brass shaft and a rubber diaphram inside. Remove all parts and note how they go together.4) There is an arrow on the bottom of the valve indicating flow direcrion. Attach a bare nipple on that side and and then a quick connect on the other side. You only need to use 4 or so turns on the nipples using teflon tape. 5) thread the assembly onto the compressor, carefull not to over tighten until the gauge hole is facing you (there are gauge holes on both sides of the housing depending if you want the knob facing up or down. A bung is supplied to plug the hole you don't use for the gauge. 6) install the gauge. Don't over tighten. 7) reassemble the valve, tightening screws in a criss cross pattern.
Recommended Products
$40.58
$ 17 .99 $17.99