Your cart is empty.
Your cart is empty.Sand, cut, scrape, and grind with the MATRIX oscillating tool attachment. A powerful motor of up to 18,500 OPM gives this BLACK+DECKER oscillating tool the power to tackle a variety of household tasks. MATRIX power unit sold separately.
AtlantaGA
Reviewed in the United States on July 26, 2024
Easy to use, works well, priced reasonably.
B. N.
Reviewed in the United States on July 18, 2024
Worked as intended. Fits well to drill and cuts effectively
Customer
Reviewed in the United States on June 17, 2024
Another Youtube project. With this tool, not hard at all, though my knees hate the ladder work. Used this tool to cut the bad fascia out and to cut off the nails under the drip edge that I couldn't hammer down. Replaced with 1x6 hardie board that I pre-painted. It'll outlast me. The tool made the job pretty straightforward and performed perfectly.
AJ
Reviewed in the United States on January 11, 2023
The oscillating tool itself is great to replace another bulky corded item in my shop, snaps right into my matrix drill body, and the quick release is not too difficult to use with one hand, though it is not a universal fit. The hold down only accepts B+D and Porter Cable blades with a large round 12-hole pattern. Universal blades with 12 long thin slots instead of round holes, or blades which do not have a slot on the back to go around the arbor, will not fit. So, you are either restricted to purchasing maker-specific blades like the BDA1212, or adding the following magical missing piece of the puzzle, which should have been included in the box.In order to utilize your current blade collection, you must get the "Exchange-a-Blade 2070262 Adapter for Porter Cable". This goes onto the outside of the arbor of the B+D attachment with an included screw. It is a very snug friction fit, but once you screw it on for the first time, it should not come off anymore. This will let you use the B+D tool with pretty much any old blade with the 12 slot pattern (though you will have to use an included allen key to screw them on). This does not preclude use of the quick change, so you can still use Porter Cable blades after the conversion if you wish.I wish this part came with the tool, and though it is under $10, its just an annoyance to not be able to get to work right away. I believe the South African variant, the MultiEvo, does include such a screw and washer in the attachment kit in order to use other blades.
booboo
Reviewed in the United States on April 3, 2023
Quick change blade assembly. And really holds the blade securely. Cuts well sands great. Very happy with the matrix system
Mario Bouchard
Reviewed in Canada on August 31, 2020
Bon.. mais le livreur avais mêlé les clés.. alors une chance que la madame ma apporter mon colisMais contant il as même un kit pour sablé !!!
Christiane
Reviewed in Canada on November 4, 2019
Good
Arturo Navarro
Reviewed in Mexico on January 7, 2019
Excelente producto, llego a tiempo y en buenas condiciones. Yo lo voy a usar con el sistema Bolt on de Craftsman. Funciona de maravilla.
Customer
Reviewed in Canada on July 5, 2017
very good
James
Reviewed in the United States on June 13, 2017
This is a pretty cool attachment.Had never used an oscillating tool before, used this and was like "This is sweet, who wouldn't want this".Makes me want to cut holes in the wall just for fun but I don't think my landlord would be happy about that so I resist.Seems relatively well built but I wouldn't use it for all day or long term use, definitely feels like a quick home project use type item, and you would probably want a dedicated tool if you were going to be using it on a job site for hours a day.
Lobo
Reviewed in Mexico on October 20, 2016
Yo tengo el sistema Craftsman Bolt-On el cual compre muy emocionado, pero en México solo se consiguen 3 tipos de accesorios, o cuatro si tienes suerte los cuales son , desarmados (que normalmente está incluido), el rotomartillo, la cierra de disco y la caladora, cada uno tiene un costo de $1,200 MXN pero siempre se encuentran en promoción y terminan costando unos $850.00 MXN, cuando busque mas accesorios no logre encontrar en ninguna parte, y encontré que los blackandeker son idénticos y compatibles, además de que un poco mas baratos, funcionan perfectamente , solo no intenten usar las pilas de matrix en Bolt-On, ni viceversa. Exelente producto, y muy buen precio.
Vispian
Reviewed in the United States on June 26, 2015
I have never had an oscillating tool like this before, so I cannot compare it to dedicated tools of this type. What I can say however that I'm amazed at what this tool can do, and surprised at how well it does it. So versatile.Seems well made, operates well and used standard blade attachments. From flush cutting finish jobs, cutting rigid insulation, cutting plumbing pipes, sanding and shaving off some parts with just a too snug fit - this attachment is amazing. It is a joy removing grout, and much faster than manually scraping it out, and the vibration scraper blade makes tearing up old linoleum quick and easy. Even scrapes paint well. I never knew these tools could do so much. For about $30, and with many high reviews I figured I'd give it a shot - it has extended the use of my Matrix system in a big big way. My only regret is waiting to add this to my Matrix system, should've added it first thing. Amazingly versatile, effective and affordable. This is perhaps my most used Matrix accessory, seems it always comes out on every project.
Brent B.
Reviewed in the United States on February 27, 2014
I bought this as an addition to my Craftsman set. It works great with it and it very versatile.I also bought one of the multiple blade/tool sets, so I have a tool for just about everything: cutting, trimming, sanding and a whole lot more. Just buy a new blade/tool if you need it to do something else. There are some good starter sets here on Amazon for $20-40.I can't speak to long term reliability but mine has taken a beating in the time I have had it with heavy use without even a hint of hesitation.This was not the first add on attachment I bought for my Matrix system, but I wish it had been. I use it almost as much as all the other attachment combined. If you have one of these sets, get this tool!
Recommended Products
$227.90
$ 99 .00 $99.00