Your cart is empty.
Your cart is empty.Product Description
5.8GHz FPV Diversity Monitor Black Pearl RC801 with 7 inch 1024*600 LCD Screen
All-in-One Diversity monitor makes everything simple and easy
Flysight Black Pearl RC801, which is a kind of 5.8GHz 40channel FPV diversity receiver monitor with 7 inch 1024*600 LCD Screen,is uniquely designed with useful features as below described in Highlights for FPV applications,such as ground station for different drones like DJI phantoms,all race drones,and taking filming etc. How simple diversity works?Equipped with two antennas, constantly switching back and fourth between left and right antenna and choosing the best signal for your footage.Fully support next-wave and air-wave VTX and many other 5.8GHz transmitters due to 40channels.It is a great monitor/receiver for the DJI Phantoms. The dual receiver auto-switches to the antenna with the strongest signal or you could put two cameras on the drone.
Spefications:
- Screen size:7”
- Resolution: 1024 x 600
- Brightness: 300cd/m2
- Contrast: 700:1
- Receiver Frequency : ISM 5.8Ghz -90dBM
- Diversity: Yes
- Video Standard: NSTC/PAL (automatic switching)
- AV In: Video, stereo audio output
- HDMI input
- Power Supply: 7 ~28V (suggested to use 3S lipo battery (1000mah) with JST connector
5.8GHz FPV Diversity Monitor Black Pearl RC801
How Diversity Monitor Work :
The built-in 5.8 GHz Diversity receiver will always ensure you get the best video signal and allows you to use two different antennas. The other great feature is the integrated battery so you do not need to carry extra batteries just for your monitor.
This monitor is compatible with the 5.8 GHz transmitters we sell. If you are unsure that your transmitter is compatible with this monitor, please make sure that the channel frequencies on your transmitter match a channel on the receiver (see table below). This monitor is also compatible with Fatshark and ImmersionRC gear.
[Review]The updated 40 channel diversity receiver is a great improvement for an already great product. I purchased the Black Pearl Model RC801 based on overhelming positive feedback and reviews. The quality and performance I've experienced is on par with what others have reported. That shows me they are consistent which quality manufacturers, if anything, should be. Couldn't be happier. Screen resolution is phenomenal, the diversity receiver works exceptionally well, and the unit is solid, well made and well built. It's been perfect for my FPV hobby. Also a very great product The horizontal flip saved me when my HDMI cables were too short.Works well with PAL/NTSC camera and transmitter.
CONTENTS
- 1 x 7"FPV Receiver Monitor
- 1 x 1.1V/1000 mAh Li-Po battery
- 2 x 5.8G Antenna
- 2 x AV cables
- 1 x JST DC input cable
- 1 x JST DC output cable
- 1 x Foldable Sun Hood Shade
- 1 x 12V 2A Power Charger
Flysight Black Pearl RC801 FPV Diversity LCD Monitor 5.8Ghz 40CH Wireless Dual DVR Screen Monitor with HDMI In
Excellent Monitor
I'm using this with our production cameras and, when needed, connected to the ST16 controller for the Yuneec H. Easy to see in the sunlight, with the sunshade. The colors are good. Lots of inputs and outputs which makes it very versatile. The portability with the battery is the icing on the cake. We'll be ordering several more.
- Standard Thread Size
- Multiple Working Mode
- Video Image
FPV Diversity Monitor Black Pearl RC801
All-in-one Compact Unit ideal for the serious FPV flyers
Runs with a resolution of 1024 x 600 with a contrast of 700:1 to give you a bright high quality display, an integrated 1000mAh battery, support for connections to HDMI ,it can also receive two channels at once for better signal reception, and automatically selects the strongest signals for the best on-screen image possible.
With support for up to 7 channels over 5.8Ghz.,it is compatible with Fatshark, Boscam Eachine ,DJI TX and son on
- 5.8GHz Wireless Diversity Receivers
- HDMI in and DVR
- 7inch HD LCD Matte Screen Monitor
- Built-in 3S Li-Po Battery Pack
- A Fold-able Efficient Rigid Sun Hood
- 5 modes supported: Diversity/RX1/RX2/AV IN//HDMI mode (Video Transmitter is Required)
- Built-in 5.8Ghz Dual diversity receiver automatically for best reception ,not affect by 2.4GHz R/C Radios
Be used in Camera
The Black Pearl RC801 which can use camera , when we take the photography ,it can appear on the RC801 screen ,we can check the pic good or not . No "blue screen
Flysight Black Pearl RC801,5.8GHz
Diversity high resolution display monitor with foldable sun hood,makes signal reception and video display easily and directly, which also helps a lot on photography and filming in FPV and ent- ertainment fields
Enjoy Your Outdoor Flight
With your important safety assistant Black Pearl RC801,you can not only receive the OSD data to keep your drone safe,but also get many amazing images from your drone on the screen
Flysight Black Pearl 7" FPV LCD HD DVR Monitor with Built in Diversity Receiver 40Channel 5.8Ghz with HDMI In
Why a great choice for FPV pilots ?
If you are looking for an ideal monitor for First Person View or aerial photography, then the Flysight Black Pearl 7" LCD monitor is for you, it has been designed especially for FPV / First person View and outdoor users. The screen has twin 5.8 Ghz receivers built in which offer “diversity”, which means that the receiver with the stronger signal will be active, if the screen needs to switch back over to the other receiver you will not see any drop in picture, the only way of knowing that the screen has jumped from one receiver to the other is by the small blue LED in the top of the screen indicating which receiver is in use. The monitor will not be effected by the 2.4 Ghz RC radio controller as the systems operate on different frequencies.
The Flysight Black Pearl monitor has a very bright & clear image (adjustable brightness) and uses its own built in battery to power the screen when you are at the flight field. The monitor is supplied with a wall charger to charge the internal battery, without the need to remove the battery from the back of the screen.
One of the most important features for a monitor used for FPV / First Person View use is that there is no "blue screen", if the signal becomes weak or interrupted for short periods of time, the Flysight screen will not go to a blue screen, this give warning that you are running out of the range of the video link when the limits of your FPV setup are tested. This feature means that you are able to fly much further and never lose the image to the blue screen.
Enjoy your flying well from now on :-)
Hao P.
Reviewed in the United States on July 15, 2023
Best LCD for analog FPV system. This unit does have DVR functioning, just bad manual instruction causing confused.To use DVR: Insert microSD/TF card into a slot on top of the LCD.Long press Channel-down button (see photo) to Start record. Long press again to Stop.Long press Channel-up button (see photo) to Enter DVR playback menu. Long press again to Exit.While in DVR playback menu, press Volume-up or Volume-down to select videos. Press Mode button (see photo) to play.
Allan Silverman
Reviewed in the United States on April 13, 2023
Have a smaller 4.3 inch 800 x 600 monitor ,wanted a larger screen 7 inch screen and this one supposedly has 1024 x 600. Side by side picture quality on this is inferior by far , washed out, blurry . On the "much cheaper " smaller 4.3 screen picture quality is much better , sharper , better colors , fiddling with menu system on this did not improve anything .
Batfire
Reviewed in the United States on May 17, 2022
Well first off, I read a lot of the reviews on this unit and most said battery charger was no good and would not charge onboard battery, so.......... I bought the bigger charger for this unit. Now I have a spare charger. The one that comes with the unit works great. I find NOTHING wrong with this unit and have only good things to say. I paired it up with the spotter 2 all in one camera and couldnt ask for anything more, they are a great combination. I have the black pearl i have on a stand that i can watch while flying or use my range video headsets in combination. This is a great solution. Very well made and does what is advertised and more. Highly recommend.
Nicolas Udy
Reviewed in Canada on August 16, 2019
Good diversity receiver for the price. The instructions aren’t very clear and the DVR feature is particularly confusing, but once everything is working its works very well, even in bright daylight.
Justin Smith
Reviewed in Canada on May 14, 2016
Awsome
Brian D
Reviewed in the United States on June 8, 2015
The monitor works ok. Here are the problems I have had. The frequency of the receiver may be off or not perfectly aligned for the immersion 5.8GHz transmitter. I had to buy immersion receiver for better distance. The battery failed within 60 days of purchase.
Timothy Jay
Reviewed in the United States on April 3, 2015
Great first impression on this monitor for my Phantom 2 FPV setup - once I got a fully functioning unit. My initial order had a defective battery (would not charge or hold power at all). I returned the unit and ordered another from a different seller and 2nd time around worked great. I bought this along with the Immersion RC 600mw and DJI iOSD Mini - but be careful of faulty units. My luck on my first order of all had issues with each of them and had to return and order new ones - only reason I'm deducting a star because of the faulty battery from my first order.
pchm
Reviewed in the United States on October 6, 2014
This monitor and built in diversity receiver work very well. I bought this item after researching and finding it has very favorable reviews. Like most people, I wanted an alternative for my Fat Shark Predator v2 goggles and this monitor has performed as expected. I have used it on very bright days and with the included detachable sun hood found that I am able to see the screen clearly. No Blue screen on this so when the signal weakens you only get snow till the signal improves. The built in LiPo battery is a huge plus and it comes with all the necessary cables to also be able to use an external LiPo in case the main battery runs out. The most I have used the monitor is for about 40 minutes of flight time and the internal battery has not yet run down.I found that I can also use this monitor as an external monitor for my Canon 70D DSLR camera and works very well for that also.
JerryEl
Reviewed in the United States on October 24, 2014
This is a great monitor/receiver for the Phantom 2. I put a circular antenna on the right side of the monitor which gives better reception. The dual receiver auto-switches to the antenna with the strongest signal or you could put two cameras on the drone. I wish it had an SD Card DVR inside it but there are alternatives if you want to capture video with the iSOD info included using the video out socket. A DVR comes in handy if you happen to lose the drone you will know the approximate location it went down. Some have reported the glare screen is flimsy but I haven't had any trouble with it staying on and one could hot glue it on if it's a concern.From reading all the reviews I could find on the Net this is the best one I've seen or used.Update 11/6/14: I am now using the DJI mushroom type antenna on the left and a "Circular Wireless HELIAXIAL58 Helical Axial Mode 5.8 GHz FPV Antenna" on the right along with the "FlySight 5.8GHz 32-Channel A/V Transmitter, 1.2W (TX5812)" transmitter with a matching DJI mushroom type antenna. All purchased here on Amazon. I replaced the DJI stock transmitter with the FlySight.Definitely the way to go for further range but the high powered transmitter will cut into the flying time a bit. Before, I was starting to get video breakup at 800-850 meters (60 meters altitude) and now the video stays perfect further away but I haven't tested any further than 850 meters because I lose visual contact (Hey, I'm an old guy with poor eyesight). But once I have a "spotter" I will update this review again.I really like this diversity receiver. The ability to use two antennas and the receiver using the strongest allows for more piece of mind when using a directional antenna like the "Circular Wireless HELIAXIAL58" antenna above which must be pointed directly at the transmitter's antenna. I believe the angle with this antenna is 15 deg. on each side or a total of 30 degrees.Update 2/10/14: I was just getting ready to fly and was testing all FPV equipment and noticed the Black Pearl went off when I disconnected the charging cable. Took out the battery and checked it with a volt meter and it was only putting 2.4v so obviously it isn't charging. Checked prices and found a new battery was $59.95 here on Amazon so checked prices on the net and could only find it in a couple of places, Ebay for $45 and TroyBuiltmodels at ( https://www.troybuiltmodels.com/items/SZG-RC801-BATT1.html ) for $29 each plus shippping. I ordered 2 of them and shipping was $14.96 (FL sales tax extra) which came to $36.48 each which was the cheapest price I could find.Until I can further check into why this battery suddenly quit working (maybe charger is defective) I would recommend you watch the charge carefully and disconnect as soon as it is fully charged. LiPo batteries can be cantankerous if not charged and/or discharged carefully and I'm not sure if having to charge it while inside a device is a good idea. Also they say running one down to past 30% shortens their life so be careful.
Recommended Products