Shopping Cart

Your cart is empty.

Your cart is empty.

Beduan Brass BPL Push to Connect Air Fittings Elbow 1/4' Tube OD x 1/8' NPT Male 90° Degree Adapter (Pack of 2)

Free shipping on orders over $29.99

$11.99

$ 5 .99 $5.99

In Stock

About this item

  • Type:Push in fitting/Push to connect /Size:1/4 " Tube OD x 1/8" NPT Thread
  • Fluid Admitted:Air Vacuum Water (no freezing)
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
  • Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass
  • Working Temperature:0-60°C | 32~140°F/Negative Pressure:-100Kpa | -29.5 In Hg



Product Description

Beduan Push to Connect Fitting Elbow

Type: Push to connect

Size: 1/4 " Tube OD x 1/8" NPT(Multiple sizes)

Fluid Admitted: Air Vacuum Water (no freezing)

Working Pressure: 0-2.0MPa | 0-290psi

Applicable Tube: PU / PA / PE / PVC

Working Temperature: 32~140°F

Shape: Elbow

Copper Nickel Plating

  • Resistance to high pressure
  • Corrosion resistance
  • Oxidation resistance
  • High temperature resistance
  • High Precision Processing
  • Nickel Plating Treatment

Product Feature

push in fitting

It can rotate 360° even after Installation.

PL Fittings

Bright and clean without blemish.

4

Easy installation, good sealing, reusable, no air leakage

Notes for the Connection Of Stainless Steel Quick Connector

  • 1.Make sure that the cut surface of the pipe is vertical, that there are no scars around the pipe and that the pipe is not elliptical.
  • 2. When inserting the pipe, it must be inserted to the bottom of the connector. If the pipe is not inserted in the end, it may cause air leakage.
  • 3. After the pipe is installed, pull the pipe to make sure that the pipe cannot be pulled out.
6

Installation Method

  1. After the pipe is cut off, remove the burr and insert one end of the pipe into the socket of the joint (must be inserted into the bottom) to achieve a firm connection and sealing effect.
  2. After repeatedly pulling out the pipe. The worn part of the end should be cut off. Continue to use after leveling.
  3. When disassembling the pipe, use your thumb to press the connector ferrule in and gently pull out the pipe.
  4. After installation, you just need to rotate the joint body to adjust the direction of the pipe.

Trainer Merrell
Reviewed in the United States on February 17, 2025
Broke my top air bag fitting so started searching found a couple options but they wasn’t clear on product dimensions. This one was and fit perfectly
Anthony
Reviewed in the United States on January 18, 2025
I recommend. Good quality and as described
Martin meek
Reviewed in the United States on September 1, 2024
As expected
Tyler
Reviewed in Canada on August 4, 2024
This product looks great and would likely work awesome for most people in most applications. However, I made the mistake of using it for my vacuum hose on a LS turbo engine application and it did not handle the heat on the turbo side. This was totally the fault of myself, not thinking about the heat and not the product itself. It does state that it is only rated for a certain heat temperature. However, my temperature was a lot higher. But I still would recommend for most of their applications. Looks like a decent quality part.
billy Hoover
Reviewed in the United States on August 13, 2024
Worked just like I needed them too
Rodolfo Luna
Reviewed in the United States on July 18, 2024
Love these fittings. Always keep them on hand.
edwardknapp
Reviewed in the United States on February 7, 2024
Starting up a paintball field and we getting parts and supplies and will do a lot of business with these people very fast next day delivery if not two days but very fast on delivery very well priced
Huckleberry
Reviewed in the United States on November 1, 2024
Exact fit for my air bags on my truck. I keep the listing tagged for future purchases
Everett Jackson
Reviewed in the United States on November 1, 2019
good quality
Recommended Products

$10.24

$ 4 .99 $4.99

4.8
Select Option