Your cart is empty.
Your cart is empty.Product Description
Universal Rotary Changeover Cam Switch 63A 3 Position 3 Phase 12 Terminals
- Rotary Cam Selector Latching Switches
- Positions : 3 Positions (1-0-2)
- Ui: 660V ; Ith : 63A
- Pole Numbers : 3 Pole
- Terminals: 12 screws terminals
- Overall Size: 4.4" x 4.4" x 7.36"(L*W*T)
- Total Weight : 757g/1.66 lbs
- Protection level: IP 65
- Material: Plastic,Metal
- Package Includes: 1 x Switch ,1 x Exterior Box ,Accessiores
- Professional Supplier for Rotary Cam Switches
- Supply for different Range of Changeover Switches from 20A to 160A
- Good Apprearance and Convenient Operation,safety and reliable with external Wiring for easy use
PRODUCT ADVANTAGES
Silver Alloy Contacts
- Low resistivity
- Good Conoductivity
- High Temperature Resistance
- Oxidation Resistance
Copper Connection
- Thick Galvanized Copper
- Good Conoductivity
- Not easy to wear & tear.
Flame Retardant PC Housing
- Reinforced Retardant material
- Good Insulation Performance
- High Temperature Resistance
- More Durable
Applications
The Cam Switches are widely implicated in the electrical control-panel-indicate.
Brian
Reviewed in the United States on August 8, 2024
Very durable
Craig Staples
Reviewed in the United States on February 24, 2024
The media could not be loaded.
The buyer
Reviewed in the United States on December 19, 2024
Works great for our electric car charger. Our circuit breaker did not have enough amperage. So I made it to where you can either run the dryer or charge the car. If I had to do it again I would get one with a bigger box, because it was a pain to close with the wires.
Jacques Delisle
Reviewed in Canada on November 8, 2024
Le produit à été rapidement livré à domicile. Il répond bien à mes besoins.
Souc
Reviewed in Canada on October 25, 2024
Très bien construit, très solide
Fernand
Reviewed in Canada on February 19, 2023
J'ai du refaire les adaptateurs de connexion des fils car ils ne serrait pas convenablement et ça devenait pas très sécuritaire et les contact sont vraiment très petit pour 63 Amp. je conseil mettre la connexion du tambour sans la charge et de mettre la charge par la suite pour ne pas endommager les contact.
nicolas tremblay
Reviewed in Canada on November 18, 2023
exactement ce que j'avais besoin
John
Reviewed in the United States on November 1, 2023
Used in an RV Solar setup, two inputs to ( shore and inverter) one output. No instructions, but I used jumper wires on one side (output), putting the shore and inverter input wires on the other, top and bottom respectively. So far the setup works for my needs.
Stealthy like a cat
Reviewed in the United States on May 7, 2022
This is useful for switching between inputs, outputs, single or split phase, depending on how you choose to wire it. The terminal screws are pretty heavy duty, no issues with connections. Mounts easy, holes for wires already there and the grommets included.
BYZ
Reviewed in the United States on May 6, 2022
This is a good deal for what it is. There are a few finer points to be aware of.1) Multiple selector switches can be expensive. Relatively speaking this switch and enclosure is a real deal.2) For the electricians among us note the contacts are not "arc or flash" proof. There is a warning to not switch under load.3) My loads are 30A, #10 stranded wire. The terminal pinch plates are arched and barely compressed the #10 copper. It was necessary to position the wire "just so" in order to make solid AND secure connections. Novices can easily experience heat damaged terminals (over time) and wires that spring free if they do not pay attention.4) The enclosure is quite deep, providing decent wire bending space but two things.a) the knockouts are not positioned properly so you'll have to drill your own...not a big deal.b) with four anchors in the back the box is "twisty" when the switch is turned...again, not a big deal.Now sure if I would purchase one of these for a professional installation unless flashing or arching was not an issue and, at that, I would use a standard nema box rather than the provided Euro/Asian sized box...the switch and cam can be easily adapt to a standard nema box.
Pascal
Reviewed in Canada on March 12, 2022
I use this switch for my windmill, so i have position 1 connected to my rectifier, and i jumped pos 1 to pos 2 and short to other side of pos 2 to have a brake, works great !
Nathan
Reviewed in the United States on January 27, 2020
Able to set up switch as a changeover between two kilns. Had to put jumpers on the right side terminals, and then wire each kiln to the left side terminals. For 6 gauge wire, the box is a bit small and it was very difficult to get the wires secured and seat the switch in the box. Switch seems sturdy, but could feel the strain on the assembly when trying to seat it in the box. So far, wires remained secure and switch appears to be working. Will have a full firing cycle later this Spring and can update later.
Austin
Reviewed in the United States on September 10, 2019
Excellent switch with a very good and audible detent in each position. Easy to wire and came with supplies to seal the switch against the environment. Only gripe I have is that the plastic was too thick around the knockouts which made them difficult to remove. Not a big thing with a quality switch.
Recommended Products