Your cart is empty.
Your cart is empty.Description:
- Pneumatic Foot Pedal Valve is controlled by foot, can be used in auto car, features 3 Way 2 Position, high performance.
- Widely applied to all kinds of pneumatic system.
- If you need 4 way 2 position foot pedal valve, please search ASIN: B07BVPM4L1
Gregory T Reid
Reviewed in the United States on March 21, 2024
I'm surprised at how well this works, especially given its cheap price. I've ordered two of them, and they both completely turn off when off. There is no leakage whatsoever from the on/off valve. I used a little bit of "T plus 2" thread sealant on the 8mm hose junctions (not sure if it was really necessary) but am happy to report that the input and output quick-connect junctions are also completely leak free.I have the rest of my air system (using 8mm tubing and about a dozen of the quick-connect junctions) also completely leak-free, which means that I can leave my compressor turned on and not have to worry about it "leaking down" through the night and turning itself on to re-pressurize. In fact I can leave it for weeks at a time without any leakage.Anyway, I'm very happy with the quality and effectiveness of these foot pedals, and would definitely order another if needed.
tina A.
Reviewed in the United States on February 2, 2024
it is an air valve. push it down, air goes through, let it up, air stops.
Neal Weatherford
Reviewed in the United States on November 1, 2023
The air switch is compact and ergonomically functional. It is very economically priced and the service was super.
Denis Briand
Reviewed in Canada on April 12, 2023
Pas installé encore
Joe Luke
Reviewed in Canada on March 9, 2022
Works as promised
Colton Poirier
Reviewed in Canada on February 27, 2021
Added this to my diy sandblasting cabinet and it's works great even after 12 hours of use still like new. Very happy with this product
Michael Mahoney
Reviewed in the United States on September 16, 2019
If you are looking to use this switch with multiple pieces of air equipment , you will need to make some adjustments as the inlet/outlet ports are close together, If this switch is being used for one piece of equipment it should be plumbed as expected for this style of switch. A couple swivel adapters and all is good to make it a "portable" unit. I wanted this for a DIY hand held planishing hammer, and with the air adjustable swivel it works perfect and mobile.
florian
Reviewed in Canada on May 24, 2018
hole for hose not seems to be standart, but works
axiom000
Reviewed in the United States on February 18, 2018
The operation of this device is fine, and the cost was great. However there wasnt even a basic set of intructions. I requested something, anything to show proper hookup from the Seller. They could not provide any. I have history working on sandblast cabinets so it wasnt that hard, but others might have issues. A simple IOE stamped on ea port would suffice.
Steven
Reviewed in the United States on December 15, 2018
Purchased for a media blast cabinet. After hooking air lines up and testing, I discovered the volume of air dispensed through the valve is sorely lacking. As I see someone else has stated, the ports may be 1/4", but the orifices are tiny.Already packaged and ready to go back to whence it came.
Customer
Reviewed in the United States on January 20, 2018
In/out ports are way too close together if you're going to use QD's on them. I want to be able to use this for more than just one item, so I installed QD's on it. I had to use an elbow on the 'in' port in order to get the spacing needed to connect to those. Without the elbow, there's NO way you'll be able to use the QD's.Markings for the 'in' and 'out' ports are mostly hidden by the metal body. Would have been MUCH better if the marks were ABOVE the ports, not under them.Performed a function test on the valve once QD's were attache and it works as it should. Won't know how it holds up over time until I give it more use. Right now I plan to use this on an air assisted bottle jack (20 ton) that will be the main part of a forge press.
KOB
Reviewed in the United States on December 20, 2017
I had to pick up some adapters that would let me attach this to aquarium airline tubing, but I use this switch to selectively actuate or restrict the flow of air through a vacuum system for a manual pick-and-place machine. It handles being stepped on by a big guy with large feet so, as long as your fittings are correct and you're not exceeding pressure limits or anything, it should do just fine for any pneumatic or vacuum application.
Recommended Products
$109.99
$ 51 .99 $51.99
$39.50
$ 20 .99 $20.99