Shopping Cart

Your cart is empty.

Your cart is empty.

Bandsaw Blade 1/2' X 105', 4 TPI

4.8 (16) Write Review
Free shipping on orders over $29.99

$23.00

$ 9 .99 $9.99

In Stock

About this item

  • Milled teeth are 50 PERCENT SHARPER than competitors stamped or crush ground blades
  • Precision Induction hardening throughout the blade vs competitors flame hardening
  • Tooth edge is 20 PERCENT harder than any high carbon steel resulting in extended sharp time
  • More ductile steel than any high carbon steel leads to extended flex life and a cooler running blade


Timber Wolf's use of premium Swedish steels, proprietary induction hardening methods and exclusive tooth milling processes has created some of the finest woodworking blades in the world. Milling the teeth of the blades into a piece of strip steel produces a finished, razor sharp edge without ever having to stamp or grind the teeth. Induction hardening allows for different but more precise hardness throughout the blade. These unique manufacturing techniques along with the use of Swedish Silicon steel and the highest quality alloys set these blades apart from all other wood blades. This PC (Positive Claw) blade has sixty percent of the feed speed capabilities of a hook tooth, while at the same time giving you the great finish of a skip tooth. The depth and roundness of the gullet increases sawdust removal and cutting speed while the milled teeth help to reduce consumption of horsepower. Couple all this with our unique 6.5 degree rake angle and special 5 tooth set pattern and you have an awesome cutting blade that glides through the wood and produces an excellent finish and gives you great overall life.


Morrison Fisher
Reviewed in the United States on January 14, 2025
There’s no better blade in the biz
Morrison Fisher
Reviewed in the United States on January 14, 2025
There’s no better blade in the biz
Customer
Reviewed in the United States on July 14, 2024
Very sharp blade. We’ll see how long it lasts
Customer
Reviewed in the United States on July 14, 2024
Very sharp blade. We’ll see how long it lasts
William K.
Reviewed in the United States on February 6, 2024
Relatively low tension blade. Follow the instructions and tension your blade correctly. This thing cuts amazingly well but is a rougher cut due to the type of blade it is. Also it is exceptionally quiet compared to the 6tpi Olsen I was previously running. Expect to do some serious sanding as it leaves a quarter-sawn-like surface. Highly recommend this blade if it fits your purpose.Follow-up: Rip cuts on 4x4 pine are ok. Cross cuts are amazing and fast. Still recommend.
William K.
Reviewed in the United States on February 6, 2024
Relatively low tension blade. Follow the instructions and tension your blade correctly. This thing cuts amazingly well but is a rougher cut due to the type of blade it is. Also it is exceptionally quiet compared to the 6tpi Olsen I was previously running. Expect to do some serious sanding as it leaves a quarter-sawn-like surface. Highly recommend this blade if it fits your purpose.Follow-up: Rip cuts on 4x4 pine are ok. Cross cuts are amazing and fast. Still recommend.
Larry
Reviewed in the United States on December 16, 2024
Has performed well, ripping 2x3x8 into 1x3. Lubricate with cooking spray. Loosen tension between uses.
Larry
Reviewed in the United States on December 16, 2024
Has performed well, ripping 2x3x8 into 1x3. Lubricate with cooking spray. Loosen tension between uses.
randomdigits
Reviewed in the United States on November 13, 2024
This was my first blade from Timber Wolf, and I can say it is the first of many. I am impressed. Since I received it I have cut quite a bit of aged oak, including many pieces up to ~3-4 inches thick, and it is still sharp and cuts well.From the sheet that came with the blade it is clear that the folks at Timber Wolf are not just manufacturers, but have lots of experience cutting wood, and understand the use. That matters.Using this on a Delta model 28-206 14" saw with a 6" riser. The saw manual says 105.5" but this 105" fits perfectly.
randomdigits
Reviewed in the United States on November 13, 2024
This was my first blade from Timber Wolf, and I can say it is the first of many. I am impressed. Since I received it I have cut quite a bit of aged oak, including many pieces up to ~3-4 inches thick, and it is still sharp and cuts well.From the sheet that came with the blade it is clear that the folks at Timber Wolf are not just manufacturers, but have lots of experience cutting wood, and understand the use. That matters.Using this on a Delta model 28-206 14" saw with a 6" riser. The saw manual says 105.5" but this 105" fits perfectly.
David Norris
Reviewed in the United States on April 29, 2024
Fantastic resaw blade and a great price. Would recommend.
David Norris
Reviewed in the United States on April 29, 2024
Fantastic resaw blade and a great price. Would recommend.
Carfunkle
Reviewed in the United States on October 17, 2023
I've become fond of Timber Wolf band saw blades and when I needed some more and saw the price on these, I stocked up. Although rated for kiln dried hardwood, they seem to be working perfectly on green maple and birch. I use them to cut 4 foot logs to shorter lengths (cross cutting) and then to rip those shorter sections to create bowl blanks for wood turning. I have found them to track well on the machine and cut well on everything I put in front of them. Highly recommend.
Carfunkle
Reviewed in the United States on October 17, 2023
I've become fond of Timber Wolf band saw blades and when I needed some more and saw the price on these, I stocked up. Although rated for kiln dried hardwood, they seem to be working perfectly on green maple and birch. I use them to cut 4 foot logs to shorter lengths (cross cutting) and then to rip those shorter sections to create bowl blanks for wood turning. I have found them to track well on the machine and cut well on everything I put in front of them. Highly recommend.
Dr Attie Goosen
Reviewed in the United States on February 28, 2014
I bought this blade on a vague recommendation from a salesperson at a woodworking shop. It has proven easy to install and maintain and gives a good cut. It is the blade of choice for general work. A more advanced blade with skip teeth would get a 5 star rating.
Dr Attie Goosen
Reviewed in the United States on February 28, 2014
I bought this blade on a vague recommendation from a salesperson at a woodworking shop. It has proven easy to install and maintain and gives a good cut. It is the blade of choice for general work. A more advanced blade with skip teeth would get a 5 star rating.