The media could not be loaded.

Good

Not too quick to boot and not a lot of features - just the bare minimum of ports and connectors. But what more can you ask from a $60 (on sale) mobo? Works wonderfully with my 5700g

Good price point, came with the lates revisions available out of the box. One could get used to this quick, real quick. Has all the basics that micro boards have, essentially a basic, no frills starter board for everyday needs.

I'd assume its a pretty decent board, though i've always found asrocks cheaper boards to lack in the bios department.Anyways I come bearing a warning to other click happy buyers, this motherboard only supports a 4 pin CPU power per the product listing. Make sure your processor doesn't require 8 pin such as mine or you will obviously run into issues.

Produto veio muito bom, com dois cabo sata(obs: Sata 3 6gb/s), com um dvd e tinha um manual online mas não em video, veio as portas veio também manual fisico também, realmente a placa mãe b450m HDV R.0, rápido comparado com o que era para ser entregue pois é isso obrigado quem leu, só mais uma observação não veio nenhum parafuso para fizar a placa mãe não que disse que iria vim mas só para deixar avisado pois normalmente os parafusos vem com o gabinete, eu coloquei o ryzen 5 5600gt e funcionou fe boa e é isso obrigado por quem leu até aqui e agradeço se gostou do meu comentário 😃.

very good

I had a prior build since early 2020, with an Antec PSU that shorted out recently and died with a bang, and in the process killed the motherboard (MSI). Fortunately, my M.2 NVMe Intel disc (with Windows 11 Pro) was intact, and I did not know then about the CPU (Ryzen 5 3400G Picasso) or RAM (16GB Crucial Ballistix 8GBx2). Typically, a PSU outputs first to the MOBO and CPU, and next to the RAM. Older memories were notoriously susceptible to current and used to die with the MOBO. Fortunately, things have gotten better. Antec was great in sending me a new replacement PSU under warranty. I needed a new replacement MOBO and wanted to stick with AM4 chipset without spending a lot. I found this board on Amazon at a great price, and the several positive reviews were encouraging. Throughout the years, I had always used MSI boards for my builds, except once (ASUS). This was my first experience with ASRock, and I am very pleased so far. The box I received states "AMD Ryzen Desktop 2000 Ready" and had an added sticker "AMD Ryzen 5000 Desktop Ready", and another "Windows 11 Ready". I imagine some (older) stock did not have the added (Ryzen 5000) sticker, which would explain some reviewers who had to update the Bios using an earlier generation CPU. When I received it, I did a minimal basic build outside the case, with the new PSU and tested my old CPU and RAM. It booted into BIOS and I was so relieved that the CPU and RAM were fine. I then put the Intel NVMe disc, placed the board in the case, hooked my old Plextor DVDRW, case fans and all the headers. Windows 11 Pro loaded up and all is good. The Bios/set up on this ASRock board is very easy to navigate and has a lot of 'AUTO' settings in the default parameters, and I only had to change few things. For the technically savvy, there are several settings you can adjust, but for most people, you will only need the boot menu, particularly for Win 11, and very few advanced configurations. I did not even use the included support CD. The box contains the MOBO, CD, Installation guide, 2 SATA cables, a small M.2 screw and the I/O shield. The guide and illustrations are very adequate. It has 2 DIMM slots (288 pin) and supports up to 64GB, 32GBx2, per ASRock. I bought new 32GB RAM (16GBx2) which was easily recognized. ASRock states for Picasso, the frequency is 2667/2933, but the new memory is 3200 and runs as such, with or without XMP. I am not a gamer and never overclock a CPU and don't use a discrete GPU anymore. It has on board USB2 (x2) and USB3 headers. The CPU connector is only 4 pin and if you have an 8-pin cable (4+4), you just split it. The MOBO is the standard 24 pin. There are 2 chassis fan connectors (4 pin and 3 pin), 4 SATA connectors, HD audio and a standard front panel system header. There is one M.2 and 2 PCI slots. The I/O shield is as shown (Single PS2, but supports Y-splitter, 2 USB2, 4 USB3, Gigabit LAN, rear audio, VGA, DVI and HDMI). It is a basic board (No WIFI, BT, M-Flash, USB C) and is very well priced. As such, I would recommend as a budget motherboard. Even though I am biased toward MSI boards (I guess force of habit), I will definitely keep this motherboard in mind. Thank you.I bought a second one to upgrade an older computer (Athlon A6 APU and FM2+ socket MOBO). It also had the Ryzen 5000 and Windows 11 ready stickers. Very satisfied, just like the first time. Recommend. Thank you.

Recomendado en este momento para personas con bajo presupuesto ya que actualmente existe el formato AM5 pero a un precio mayor.

I bought this for my daughter for a cheap mobo to get her PC up and running. While it still works it's been 2 months and the Bluetooth is already out on it. After going through the troubleshooting it appears that the bt adapter thats built in is no good. One of the main reasons I ordered this mobo was not to worry about an external adapter.

Heel mooi product

excellent

I bought this motherboard on sale for $60 (before tax), I'm not sure if every one's motherboard will be like this, but mine was Ryzen 5000 ready out of the box, which saved me a lot of trouble since this motherboard doesn't have a way to flash the bios without a CPU like other more expensive motherboards. My only complaint is that the RAM was harder than usual to put in, you really need to push down harder to get them to click in.In the BIOS, you have the option to overlock RAM and adjust timings and voltages, I used the XMP profile to have my Silicon Power X Turbine DDR4 RAM, to have it run at 3200mhz (it was supposed to but without enabling the XMP Profile you will have 2666 MHZ).You also have the option to adjust overlock settings for cpu and gpu, and to adjust chassis fan speeds which is useful for cheaper case fans that only have 3 pins instead of 4 pins. Not including the 4 pin for cpu fan, this case has 2 ports for chassis fan, one is a 4 pin located on the middle left side, and the other is located on the lower left.Overall I am very satisfied. You can't go wrong for the price.