Your cart is empty.
Your cart is empty.Product Description
Key Features
Applicability
- 2-inch front-to-back design
- Compact design for driving screws and drilling holes in tight, difficult work areas
Durability
- All metal housing for maximum durability
- The support arm provides security and a comfortable grip. It can help you save time and get the job done easier.
Nice Torque
- Up to max. 3000 RPM and 500 in-lbs (56.5 Nm) of torque.
- For use with cordless drill and impact driver up to 18 volts.
Key Features
Good Flexibility
- 360° Collar Rotation
- 150° Support Arm Rotation
- The support arm can be adjusted to 40 positions ( 8 positions around the head of right angle drill attachment, each has 5 side angle positions).
High Compatibility
Compatible with a wide variety of 1/4 inch HEX Shank Accessories
- Drill Bits
- Spade Bits
- Nut Drivers
- Drill Chucks
Before Use
Note:
When adjusting the position of the support arm, align the edge of right angle drill attachment head with the edge of the adjustment collar. Otherwise, the support arm will be stuck. With drills up to 3,000 RPM, the support arm can be adjusted to 40 positions ( 8 positions around the head of right angle drill attachment, each has 5 side angle positions).
Warning:
- To reduce the risk of injury, the support arm must be securely tightened in the detent position. Otherwise, the adjustment collar would rotate when used.
- The angle attachment is for use with cordless drills and impact drivers up to 18 volts. Never use the attachment with impacting tool or corded tool.
How to use
- Make sure the adjustment collar is on the “free rotation” position.
- Rotate the adjustment collar until the support arm is in the desired position (45° increments).
- Unscrew the support arm 2 full turns. Position the support arm to the desired angle( 30°increments). Tighten the handle securely.
Seneschal
Reviewed in the United States on July 25, 2024
It's sturdy and smooth. I work in IT and play with woodworking so I haven't put it through it's paces like a mechanic would but still I can't find anything to complain about it. It's heavy for its size yet small enough to get in tight places and works better than expected for a drill attachment. All metal, no plastic that I've seen
IowaJames
Reviewed in the United States on June 1, 2024
It's saved me from having to dig holes by foundations to drill up through the silplate during fiber optic installs.Typically to avoid drilling through siding on people's homes I like to find the base of the siding and the sill plate that sits on top of the foundation, then drill at a 45° angle through it to enter the basement of the home and make a clean install without damaging siding.If the foundation ends just above the ground and the sill plate is within a few inches of ground level, typically you will have to dig a hole to get your drill at the appropriate angle to drill up through the sill plate, this device allows me to add in an impact rated drill bit and drill with only a few inches of clearance versus digging a hole.It seems very durable, only gripe I have is that the chuck release is a little tough to release at times, but I could probably fix that with a little good old WD.
Daryl Jernigan II
Reviewed in the United States on December 21, 2024
This tool is made out some crazy good materials and can tell when used. The handle will rotate when in the down position to be placed anywhere around the tool to make it extremely functional.The internal gear is precise and very smooth operation
Rene Hernandez
Reviewed in the United States on October 18, 2024
Better than other right angle drill attachments I've used ,quality tool.
Darryl G.
Reviewed in the United States on June 27, 2023
So it's a good solid well built tool but it's really big compared to the normal screwdriver which makes it harder to get in and out of small places which is what the tools designed for. Will handle a bit of overkill but I can see where it would come in real handy if you can get it in the spot you need it in.
Autumn
Reviewed in the United States on June 10, 2023
Drilling holes thru metal with this is doable and for its price point its not bad. All metal construction means it will hold up to most diy uses. I have had this tool break twice on me so far but it's do to an internal lock ring popping out of place. With a pair of needle nose pliers and a thim metal shim I've been able to disassemble, grease, then reassemble. Should I have to do this? No but you can fix this. I wouldn't recommend for any longterm or professional settings. Wish the handle didn't wiggle so much and was slightly longer/thicker to hold easier.
Nathan Cloyes
Reviewed in the United States on April 30, 2023
this is an awesome product. I was looking at other top brands for a good solid working right angle. let me just say this, I'm glad I kept looking. because everything about this item is so right, the weight, the looks, and most important the way it worksand the use of it. if any of ya all are hesitant about purchasing this product get over it just do it. I don't see how anybody could regret it, honestly.once you receive it and its in your hands your gonna be like "oh yeah". I mean this is top quality.
Love woodworking
Reviewed in the United States on December 27, 2022
This AUCO right angle attachment tool is heavy duty and it's a perfect tool for working in tight areas. Fits all 1/4 chucks. It has an adjustable handle that lets you dial in any position to help you guide it for any task needed. It is amazingly robust. Suit for woodworking, automotive uses abound and other DIY works.This equipment is wonderful to any woodworker or DIYer. It's a little more expensive than the others but definatly well worth the extra coin. Save myself a load of time and effort.If you are contemplating on buying this, just do it!
Recommended Products