Your cart is empty.
Your cart is empty.4.4 out of 5 stars
- #93,140 in Industrial & Scientific (See Top 100 in Industrial & Scientific)
- #11 in Isolation Transformers
The ART Splitcom Pro can split a single microphone signal into two outputs or combine two microphone signals into one output. As a Splitter: The SPLITCom Pro provides one direct-coupled output and one isolated output from a single microphone. Applications include sending the direct output to the main or FOH mixer, and the second isolated output to a monitor or recording mixer. The main mic output passes phantom power from the main mixer to the main mic input for use with condenser microphones. Phantom power is blocked from passing to the isolated mic output.
Sidney Park
Reviewed in the United States on February 28, 2025
Works great splitting mic signal without noise.Perfect
Jim Clayton
Reviewed in Canada on January 22, 2025
Very pleased. I regularly record audio of my solo piano/vocal performances, and use this to send my vocals to both the PA and a portable recorder. The splitter is reliable and good quality. I’m not an audio engineer so I don’t know if it’s major-label live-album quality, but I’ve been very happy with the results.
Thomas Cole
Reviewed in Canada on June 24, 2024
But it works great. I use it to take a personal monitor feed then send the isolated DI to the front of house engineer. For a small solo artist setup it’s great to get control of my mic monitoring.
DansMaRadio
Reviewed in Canada on August 29, 2023
Je l'utilise pour diviser le signal du microphone. Un branchement sur le système son PA et un autre pour le retour Intra oriculaire. J'ai gagné en volume, mais ça n'a pas éliminé re petit "rumble" que génère le processeur Voice Live Play avec du gain.
Heathcliff
Reviewed in Italy on September 3, 2021
Fa il suo lavoro perfettamente. Servizio di consegna fantastico come sempre
CB Demented
Reviewed in the United States on October 20, 2021
It's doing the job a much more expensive product does, and it's doing well. I have a weird use case, where I need one mic for 2 different computers simultaneously, and even with different impedance, it is functioning as advertised with very little additional gain required on either computer.For those who want to know, I am using a Fethead with Phantom power from the primary interface, and it is powering an SM7B with plenty of headroom on both interfaces (less than half the available gain on either).
Derick Snow, Customer
Reviewed in the United States on June 4, 2020
I use this for voiceover and A/B comparison (trying out a processor/preamp). I was looking at other options (JS-2 at a premium price) but I saw this in regular use at a well-known cartoon studio I worked in and decided to give the ART ProSplit a try.I've not detected any colorization of my mic audio and zero noise/hum/distortion added from inserting this box into my signal flow. I've never needed the ground lift or input pad.It's an EXCELLENT value for what I've gotten out of it.I go from my mic into the ART; then into my USB audio interface with one channel set to nominal levels and channel 2 set to -12 lower. When recording at home, I arm and record two separate channels. That way I can record or stream important takes to another studio or my DAW software. If I get too loud I can usually rescue any clipping in my DAW using clean channel 2 audio, sans clipping. This comes in handy with video game and cartoon projects where whispers and screams can range pretty widely in a take. It's already saved my bacon!
Dave Z
Reviewed in the United States on January 15, 2019
I used this with a Presonus rack mount system and JBL Subs/Mains. The way I utilized this is I sent an AUX feed to this unit, then split it to each of the subs. This way I could only send the low stuff (Bass Drum, Toms, Bass, Keyboards) to that channel. This kept all of the bottom end out of the mains which really helped keep the sound super clean and crisp. No more muddy stuff over the vocals and guitars. I highly recommend.
DBG
Reviewed in the United Kingdom on July 27, 2018
Good quality unit - works perfectly.. I'm using it to split an SM58 vocal mic into a focusrite audio interface and PA.
G Smith
Reviewed in the United States on June 29, 2018
Great product. I bought two of these. My drummer uses them to take his 2 tom mics and put them thru one channel on the mixer, and with the other he takes his 2 overhead mics and uses this product to go into one channel. Saves space on your mixer, especially when you can combine signals from 2 mics that are essentially picking up the same type of sound. These work really well. Great value.
Customer
Reviewed in the United States on May 1, 2017
I am using this to create my own personal monitor system (tired of haggling with the sound guys for the proper levels. I split my mic with it and send through a preamp to my wireless transmitter. This device works perfectly. No interference, sound quality is great and no detectable signal loss. If I were going to improve it I would say perhaps they could make the labeling a bit clearer because in a low light gig environment it is a little difficult to read, but overall a very good product.
Xavier Zenith
Reviewed in the United States on April 30, 2015
Nice splitter. Seems to be well built. Perfectly quiet with the isolation transformer. Solved my problem of sending the audio signal to both a live mixing board (Allen&Heath) and a recording interface (Ctrl 24 board) with excellent results. The isolation transformer also allows you to send phantom power to a mic (if needed) and isolating that power from returning to the split side. I bought 6 of them and I would reccommend them to anyone who needs to split an audio signal and is concerned about the technical problems associated with doing that. This solves those issues nicely. I would have given it 5 stars if they were designed to be attached to each other horizontally and rack mounted. Their design allows you to "stack" them (verticle) nicely though and this could be a plus if your splits are at different locations around the studio or stage.
kay bhee
Reviewed in the United States on December 15, 2011
very usefulif you need to splita single mic to recorder and onto PA...seems to work other way too...tested recording...with ittooso that is ok...NOT recommended for serious mics...tho...only recommended for typical usd 100 dollar mics or cheaper.WARNING UPDATEDO NOT USE 48Vdc condensers on this thing....does the job at least for dynamics and ribbons...thohave fun
Recommended Products
$301.89
$ 99 .00 $99.00
$73.25
$ 29 .99 $29.99