Your cart is empty.
Your cart is empty.Product Description
Mike Washburn
Reviewed in Canada on March 1, 2025
This arm has been PERFECT for my new 49" ultra-wide screen monitor. Came together easy and hasn't budged from where I set it since we got it - it's been about three months now. Very happy with this setup.
Customer
Reviewed in the United States on February 5, 2025
Using this are for my send 49 wide curved monitor. I had to really tighten it down and I was worried I would break it or strip it out. The weight of the monitor kept creeping down. After a few more turns it finally held in place and has been in use for months without any sag.
Dan Fletcher
Reviewed in Canada on February 28, 2025
I think over all this is an excellent monitor arm however mine was missing the top bushing for my monitor arm making it useless. Very disappointing, i wish the manufacture could just send me a another bushing
Customer
Reviewed in the United States on February 23, 2025
I was disappointed with this monitor arm. It IS NOT heavy-duty. It will probably hold a moderate monitor, but not like in the advertised pictures or description. I ended up returning it.
Machel Royal
Reviewed in Canada on February 20, 2025
Works as described. Easy to set up.
Shirley
Reviewed in the United States on February 2, 2025
This was easy to put together and strong enough to hold my 4 5inch monitor. Just a note, make sure you have it positioned EXACTLY where you want it. I did not and had to take it all apart to move it over about 3 inches. That was my fault.
Cristian cueva
Reviewed in the United States on January 24, 2025
Absolutely Outstanding Monitor StandI’ve been using this monitor stand with my 49-inch ultra-wide monitor, and it’s been perfect in every way. Here’s what makes it stand out: • Durability & Build Quality: This stand is incredibly sturdy, clearly made from high-quality materials, and built to last. • Ease of Setup: Setting it up was quick and straightforward—no complicated instructions or tools required. • Range of Motion: The adjustability and range of motion are fantastic! It’s easy to tilt, swivel, and adjust the height to find the perfect viewing angle. • Cable Management: The built-in cable management system is excellent, keeping everything tidy and organized. • Space-Saving Design: Despite its heavy-duty capabilities, it takes up minimal desk space, leaving me with plenty of room to work.I’ve had no issues at all—it’s held up beautifully. If you’re looking for a reliable, well-designed monitor stand with excellent adjustability, this one is an absolute winner!
Diego G.
Reviewed in the United States on January 23, 2025
The arm holds up my curved samsung odyssey G7 monitor well and is very sturdy but also pretty easy to move. i give it four stars because the first one that i got seemed to be used, the product came upside down where you mount the monitor and was very weak and unsturdy. trying to fix it, i messed it up more but the exchanged one arrived not upside down and it holds very well. looks great for sure, the instructions were a bit odd to follow but i got it down. i would recommend
Luc
Reviewed in Canada on January 21, 2025
Superbe écran. J'adore
Richard F. Weyand
Reviewed in the United States on January 15, 2025
Used for an LG 44" 32:9 monitor. Very nice durable construction. Once adjusted, allows moving the monitor around, adjusting L-R, up-down, angle up-down, even angle with the desk, easily with just your hands. Will go all the way down to the desk, and all the way back to the back of the desk (assuming one mounts the stand maybe a foot off to one side of center, which is fine).This is a very nice solution, and I'm very pleased with it. Top Quality. Heavy Duty.
Allen
Reviewed in the United States on September 8, 2024
Got this upgrading my WFH setup with a 45" Ultrawide and it definitely does the job and holds the monitor with no issues. The only reasons I took 2 stars away was because the instructions were somewhat confusing but I figured them out and the hinge that connects to the VESA mount was stuck in a tilted downward position permanently until I used edge clippers to cut a small round plastic piece jutting out preventing the hinge from moving freely. This was not listed in the instructions and may have been a defect but it was not something I accounted running into. Also, since it doesn't say in the description, if you get the USB version like I did, there is 1 USB C and 1 USB 3.0 which route through the bracket and to your PC. The end that connects to your PC are both USB 3.0 in case you were planning cable management like I was and bought adapters/hubs that I didn't end up needing. Overall a pretty good product just some hiccups.
ilyas marvhoum
Reviewed in Canada on December 5, 2024
if you are in a bad mood do not BUY TO AVOID DESTROYING your set up with your own handsif you are in a good nood do not buy to avoid thinking of how you wasted your precious timei never write reviews but this was a good waste of my time so at least let you, yes you sitting behind the sreen know that this a piece of bs.
DK
Reviewed in the United States on October 17, 2024
I made myself a new desk and I knew that I wanted to get my samsung 49" monitor off of the stand that it comes with. I wanted the slick look of a single point mount with minimal contact surface with my desk. After looking around, the one that everyone suggest to use for this monitor cost a LOT! Like between $300 - $400. Thinking that was ridiculous, I started to look and read reviews here on amazon. This one fit my needs esthetically but the price point made me think it was not going to be a quality product because it was well under $100 at the time I purchased it. I figured with free returns I could at least take a look at it. Well.... the quality is outstanding and it's more than capable of holding this beast of a monitor up and I didn't have to crank anything down to max or over tighten anything to get it to stay put. I move / adjust it to where I want and it stays in place.Now..... where the monitor attaches to the stand is NOT out of the box ready to go. I knew this going into it. I wanted it to look as integrated / factory as possible and not look like the monitor stand is obviously aftermarket. What you have to do to accomplish this is use parts of both the existing mount and the mount that comes with the stand. I had to drill 1 hole larger and use a lower profile nut and bolt I had extra laying around to get it done. If you are not at least a little bit handy I wouldn't attempt it. If you are its pretty straight forward what you need to do when you have both pieces in front of you and are looking at them. I know my photo is kind of dark but you can see the integration looks seamless. This was important to me because the back of my monitor faces the rest of the room. If yours faces the wall you might not care to do it like I did as nobody will see it. Overall I'm very happy with the stand.
Recommended Products