Your cart is empty.
Your cart is empty.Product Description
Specialty - Engine & Ignition
-
Master Harmonic Balancer Install Kit
Inclusive Coverage For Installing Balancer Pulleys On Domestic & Import Vehicles
The ARES Master Harmonic Balancer Install Kit includes a threaded driving stud, a heavy-duty driving nut with thrust bearing, 12 threaded install adapters in both metric and SAE thread sizes, four long-reach threaded press rods, and a heavy-duty case for easy storage and transport to install harmonic balancers on most domestic and many foreign vehicles. Featuring solid steel construction with a black phosphate finish for enhanced strength and durability. Note: Harmonic balancer installer only.
-
5-Piece Magnetic Swivel Spark Plug Socket Set
Easier Tune-Ups In Tighter Spaces
This ARES Magnetic Swivel Spark Plug Socket Set easily removes and replaces spark plugs with extra length and leverage for hard-to-reach areas. The interior magnet on each socket grips spark plugs tightly without wearing them down. The heavy-duty retaining ring provides superior durability and strengthens the swivel joint to keep the socket intact. Made of durable, heat treated, Chrome Vanadium Steel, with Chrome plating in addition to its 360-degree swivel action for maximum flexibility.
-
Offset Extension Wrench Set
Zero Degree Swing Arc for Confined Fasteners
The ARES Offset Extension Wrench Set is a versatile, impact-ready tool set that includes 10 low-profile sockets and can be used with impact or pneumatic wrenches to help you tackle fasteners in tight spaces. Made of sturdy steel and high-quality, lightweight aluminum, this wrench is built to last, and thanks to its zero-degree swing arc and chain-driven design, it has you covered for jobs ranging from water pumps to A/C compressors to transmissions and beyond.
-
2-Piece Offset Spark Plug Boot Removal Pliers Set
Easily Remove Hard To Reach Spark Plug Wires
The ARES 2-Piece Offset Spark Plug Boot Removal Pliers are 7.5 inches long, made of forged high carbon steel with polished nickel finish, these pliers also have double-dipped textured handles. The single offset removal pliers are perfect for spark plug wires found on GM 3.1L, 3.4L, 3.8L, while the double offset jaws give you access to spark plugs in rear boots on V6 transverse mounted engines. Their 5/8-inch hose opening also allows you to use these pliers to grip hoses, thick wire, and more.
john
Reviewed in the United States on February 9, 2025
Great product. Fast shipping!
William B.
Reviewed in the United States on February 25, 2025
Must have for replacing Subaru plugs without lifting engine 2-4 inches
Larry
Reviewed in the United States on February 18, 2025
perfect for spark plugs in my bmw, works as should would buy again
Inverse
Reviewed in the United States on June 17, 2024
This is the correct spark plug socket for a late model Mini or BMW. This makes it easy to remove the spark plug with a strong magnet to hold the plug without dropping it on the way in or out. The swivel makes installation easy without the worry or breaking the porcelain on the expensive new plugs due to side loading when torquing the plug to spec. Th product has a satin finish with knurled barrel to prevent slip while handling with a greasy hand.
Colton Myers
Reviewed in the United States on May 17, 2024
Ford tech here. I was given the unfortunate task of changing plugs on a Nissan Titan.Pros:This socket beats using a normal 14mm and magnet any day. The magnet it is pretty strong and I didn’t have to worry about the plug falling out.Cons:The detents for the 3/8 drive hole aren’t very deep and if put into a tight spot it’s very easy for the socket to fall off.The swivel portion is awesome in terms of range and mobility however it’s not as tight as other swivel sockets. If you’re not extremely gentle the socket will swing down under it’s own weight.You can’t beat this product for the price and it got the job done
moonraker
Reviewed in the United Kingdom on March 17, 2024
After some research, I purchased a set of NGK 93560 spark plugs for my 2018 Audi SQ5. When these arrived I found my existing 14mm thin wall socket could not accommodate the length of the ceramic insulator on these spark plugs. Finally located this socket which works perfectly. Recommended.
Dale
Reviewed in Australia on March 16, 2024
It was perfect for changing plugs on a 2013 Subaru Forester
Mark.L
Reviewed in the United States on October 24, 2024
This made swapping out the spark plugs a pretty simple job. The magnetic draw helps with getting them out of the spark plug tubes without having to try and fish them out yourself. Definitely a better option than the ones BMW and other companies sell at significantly higher prices.
René
Reviewed in Canada on March 22, 2023
Highly recommend this product for BMW engines. Perfect fit and very strong magnetic, which holds the spark plug securely. You won't be disappointed.
Devil Dave & Allie
Reviewed in the United States on December 7, 2023
Purchased this for removing spark plugs on a Subaru Cross Trek. The spark plugs are small, and not at all convenient to get to. A vital tool to have on-hand to reach them, but you will also need a 3" wobble extension, which I didn't have. I made it work but not without a lot of mixing and matching of tools. The magnetic feature is very helpful.
Customer
Reviewed in Canada on November 21, 2022
Worked flawlessly. Strong magnet assured I would not drop the spark plugs.
EAWreviews
Reviewed in the United States on November 18, 2022
I purchased a mini Cooper and in order to change the spark plugs I was required to buy a thin walled plug remover socket.I purchased this one based on reviews of others as well as, I liked the design and the swivel. I knew I would have to have some tilt to get The back plugs out. And boy was I right!I was immediately impressed when I open the box and saw the quality of this tool.The mini coopers spark plugs are extremely deep down in the motor. Having the magnet built-in to the plug remover is an ingenious idea and every plug remover should have one of these!The ease at which I was able to remove the original spark plugs after 130,000 miles was unforeseeable. I credit this to the tool I was using to remove these old spark plugs. This tool…Solid, extremely well-made, bonuses such as the tilt and the built-in magnet, and it was a great value for my money.My son is a mechanic and he is even impressed with how well this tool is made. He’s a very hard sale so I knew if he was impressed it really was all I thought it was in Mower.I would recommend this to to anyone that needs a steel wall socket and I assure you you will love the features this product has to offer and it won’t break your bank
Cliente de
Reviewed in Mexico on June 26, 2021
Muy buena herramienta no se caen las bujias por lo magnetico
Recommended Products