Your cart is empty.
Your cart is empty.Product Description
Andrei Mallare
Reviewed in Canada on June 16, 2024
Great fit compatible with jdm cars.Strong Oem fitment
Andrei Mallare
Reviewed in Canada on June 16, 2024
Great fit compatible with jdm cars.Strong Oem fitment
Gregory M. Ravy
Reviewed in the United States on May 14, 2024
Good quality, oem fit, nice finish, good price and fast shipping.
Gregory M. Ravy
Reviewed in the United States on May 14, 2024
Good quality, oem fit, nice finish, good price and fast shipping.
melinda s
Reviewed in the United States on March 26, 2024
Fits my 2001 Subaru Forester passenger side. We were a little weary buying car parts on Amazon, but no one else had this part for my car. It fit, it came as described, and is durable. As for longevity, we just installed it last fall of 2023 and it is spring of 2024. So far so good. We also did replace the rest of the parts from here to the wheel bearing at the same time.
melinda s
Reviewed in the United States on March 26, 2024
Fits my 2001 Subaru Forester passenger side. We were a little weary buying car parts on Amazon, but no one else had this part for my car. It fit, it came as described, and is durable. As for longevity, we just installed it last fall of 2023 and it is spring of 2024. So far so good. We also did replace the rest of the parts from here to the wheel bearing at the same time.
C Phipps
Reviewed in the United States on December 8, 2024
Installed on 03 Subaru Outback. Installed new bearings in the unit. OEM specifications and bearing installed perfectly and entire unit easily bolted onto vehicle. Good price and made the repair easy to complete.
C Phipps
Reviewed in the United States on December 8, 2024
Installed on 03 Subaru Outback. Installed new bearings in the unit. OEM specifications and bearing installed perfectly and entire unit easily bolted onto vehicle. Good price and made the repair easy to complete.
Samantha
Reviewed in the United States on December 31, 2024
This part fit exactly as it should. It came quick and I was able to get my car back together. I couldn't see any difference between this one and the factory Subaru knuckle I took off that has a crack.
Samantha
Reviewed in the United States on December 31, 2024
This part fit exactly as it should. It came quick and I was able to get my car back together. I couldn't see any difference between this one and the factory Subaru knuckle I took off that has a crack.
Charlie Wade
Reviewed in the United States on November 5, 2024
Just like OEM, great fit.
Charlie Wade
Reviewed in the United States on November 5, 2024
Just like OEM, great fit.
george
Reviewed in the United States on November 27, 2024
Well made and nice machining. Just had to clean off machined surfaces. Possibly machining lubricant or some sort of rust repellant; wiped off with black color to it.
george
Reviewed in the United States on November 27, 2024
Well made and nice machining. Just had to clean off machined surfaces. Possibly machining lubricant or some sort of rust repellant; wiped off with black color to it.
Bryan
Reviewed in Canada on October 17, 2024
Every once in a while I buy an inexpensive part to see if it is any good or just cheap garbage. I have to say that I was very impressed with this piece. Considering it is about 5x cheaper than an OEM part, the quality is surprisingly good.The fitment is spot on: the bearing press fit is excellent, seals fit correctly, the machined fit to the strut is good, camber adjustment bolt functions correctly, tie rod end fits nice, the balljoint fits snug, the holes for the dust shield are in the correct spot, the caliper bracket bolts correctly to the knuckle, and all the threaded provisions are clean and smooth.If I was to be very picky I would say that the whole casting could have been de-bured, as the edges of the machined finished areas are quite sharp. The one other thing is that the machined hole for the abs sensor is slightly looser than OEM. Both these items are not an issue of function and should not deter you from buying this part.For price to quality I would give this a 10/10.In comparison to an OEM piece, I would give it a 9/10. I cannot comment on longevity yet, which could lower this rating.The alignment was very close and I was able to adjusted to spec easily. This would be required with an OEM piece as well. The only thing I cannot comment on is longevity… but maybe I will amend this in the future.I would absolutely recommend this part. You get more than what you pay for on this one.
Bryan
Reviewed in Canada on October 17, 2024
Every once in a while I buy an inexpensive part to see if it is any good or just cheap garbage. I have to say that I was very impressed with this piece. Considering it is about 5x cheaper than an OEM part, the quality is surprisingly good.The fitment is spot on: the bearing press fit is excellent, seals fit correctly, the machined fit to the strut is good, camber adjustment bolt functions correctly, tie rod end fits nice, the balljoint fits snug, the holes for the dust shield are in the correct spot, the caliper bracket bolts correctly to the knuckle, and all the threaded provisions are clean and smooth.If I was to be very picky I would say that the whole casting could have been de-bured, as the edges of the machined finished areas are quite sharp. The one other thing is that the machined hole for the abs sensor is slightly looser than OEM. Both these items are not an issue of function and should not deter you from buying this part.For price to quality I would give this a 10/10.In comparison to an OEM piece, I would give it a 9/10. I cannot comment on longevity yet, which could lower this rating.The alignment was very close and I was able to adjusted to spec easily. This would be required with an OEM piece as well. The only thing I cannot comment on is longevity… but maybe I will amend this in the future.I would absolutely recommend this part. You get more than what you pay for on this one.
Joshua S.
Reviewed in the United States on April 13, 2024
Busted a ball joint bolt doing the ball joint. Needed a wheel bearing too. Bought these a premium knuckles , along with ball joints wheel bearing and seals. Everything fit great. Car drives like new again I'm happy.
Joshua S.
Reviewed in the United States on April 13, 2024
Busted a ball joint bolt doing the ball joint. Needed a wheel bearing too. Bought these a premium knuckles , along with ball joints wheel bearing and seals. Everything fit great. Car drives like new again I'm happy.
Customer
Reviewed in the United States on October 26, 2022
they fit
Customer
Reviewed in the United States on October 26, 2022
they fit
Recommended Products