Your cart is empty.
Your cart is empty.Product Description
Adam
Reviewed in Australia on February 2, 2025
Photon Mono 2 - once I increased the Island thickness to 1.7mm - it started printing perfectly on this product. Suction between the plate and vat didn't pull the prints of their supports at medium settings either. Best results so far. Happy with this product.
JR
Reviewed in the United States on January 5, 2025
Great detail, strength and stiffness. Good quality resin.
Kessie Marie Bishop
Reviewed in Australia on January 3, 2025
It’s prints amazing, excellent price and fantastic quality, highly recommended
Andrew Zappa
Reviewed in the United States on January 23, 2025
Just purchased an Elegoo Saturn 4 Ultra this past month, this was my first resin ever in this machine. Without changing any of the stock parameters, I'd say everything has come out as nearly perfect as a beginner with resin printing could hope. All of the claims about low odor, strength, viscosity, all true. Great product, so much so I'm hesitant to write an honest review as I fear they'll jack up the price. In all seriousness, highly recommend!
Robert Williamson
Reviewed in the United States on January 17, 2025
Nice resin to print small items or items that need some flex.
KissingTaco
Reviewed in the United States on August 8, 2024
In the past, I used to use Phrozen ABS and Sunlu ABS like resins but Phrozen was too expensive and SunLu - too thick and viscous. I usually ended up thinning the SunLu with the Phrozen to get it to the viscosity that I wanted.Anycubic ABS Pro 2 - is much better than their other legacy resins. I tried Anycubic in the past and well - it didn't work.The parts in my model are all printed in the Gray ABS Pro 2. It washes off easily with IPA (99%). However, the dye does stain the IPA which is more or less expected. The parts are durable and have some flex to them. I've dropped parts from workbench height onto a cement floor and no problems.Sanding and finishing is easily done.At this price where it's currently I will say that in terms of speed, this resin is NOT the fastest. When I use my Phrozen+SunLu blend, I print at about 2.15 to 2.25 sec/layer. For PURE ABS Pro 2, I had to bump it up to 2.35 to 2.4 sec/layer. Not much but is is technically a bit slower. But I have 7 resin printers running and I really do like and would recommend this resin.
Petter Åberg
Reviewed in Sweden on August 27, 2024
28mm units for tabletop wargaming, fluid runs ok but separates very quickly after being shaken good.So make sure to start printing asap and do the pouring after slicing your files. Leaves a white residue in the bottom of the tray.In my taste its not super abs like and is a bit brittle. Parts tend to snap and break.Plus side is cost, but make sure to print larger minis.
Jeremy
Reviewed in the United States on December 4, 2024
This resin has been awesome so far! It printed great after the first test. Factory settings actually worked on my new printer. I’ve been adjusting it to get the print speed up a little bit and that seems to be going well. So far, I am very pleased with my purchase.
Customer
Reviewed in the United States on December 29, 2024
Very thick, had to lower print speed to allow time for resin to flow. Can't beat the price and lower odor than their standard resin.
Kessie Marie Bishop
Reviewed in Australia on November 9, 2024
Arrived within 24 of ordering, ordering process was easy, fast and cost effective.Product is outstanding! Easy to use, prints perfectly on my three printers (M5S & Photon mono)will definitely order more again and have recommended to others also
Bob
Reviewed in Australia on November 20, 2024
I have ordered many liters of this resin, after initial exposure time testing, it prints to my expectations.I mainly use the resin to print large models and go through the resin big time. I had one leaking bottle but the plastic bag contained the leak and I still had the majority of resin left. I would recommend storing the bottles in the upright position when in the cupboard or shelf for a long time. (just in case)
Adrian
Reviewed in the United States on November 17, 2024
This was one of the few resins I was able to find that was dinosaur green. I wanted to print some dinosaurs for my kids. At first I thought the green might be so transparent that it would lose most of the green color. That isn't the case. The transparency actually gives different shades of green. The resin is durable and doesn't break easily.
LH
Reviewed in the United States on April 1, 2024
Step aside, marble and clay, there’s a new sculptor in town, and it’s the ANYCUBIC ABS-Like Resin Pro 2. This resin is so advanced, I’m pretty sure it’s from the future. It’s the kind of material that would make a Renaissance artist weep with joy.First off, the detail this resin can capture is so precise, you could print out a miniature version of your fingerprint and use it to fool your phone’s security. Not that I’d recommend that, of course. But you could.The durability? Oh, it’s like the Hulk of resins. You could probably print a small hammer and actually use it to hang pictures on your wall. Again, not recommended, but the point stands – this stuff is tough.And let’s talk about the post-processing. Sanding down this resin is smoother than a jazz saxophone solo. It’s so satisfying, you might find yourself printing things just to have an excuse to sand them. It’s like ASMR for your hands.In conclusion, the ANYCUBIC ABS-Like Resin Pro 2 is the dream of every 3D printing enthusiast. It’s like having a mini manufacturing plant on your desk. Just remember, with great printing power comes great responsibility. Use it wisely, and maybe don’t print out a new set of house keys. 🏠🔑Remember, folks, in the world of 3D printing, this resin isn’t just a game-changer – it’s a game printer. Happy printing!
Recommended Products