Your cart is empty.
Your cart is empty.4.6 out of 5 stars
- #499 in Camera & Photo Products (See Top 100 in Camera & Photo Products)
- #86 in Lab Handheld Digital Microscopes
Product Description
High-quality metal lens and focusing barrel+Unique UV filter design
Industrial-grade material, brings you an unparalleled focusing feel and a durable and solid product experience.
The UV filter is equipped in front of the metal lens to block soldering heat, smoke, and dust to protect the lens, which is very suitable for soldering and maintenance professionals.
AD407 Product Highlights
7 inch Display
AD407 digital microscope has a 7 inch display which offer you more clearance and less delay of the images and videos. Video output :UHD2880X2160 24FPS; FHD1920X1080 60FPS/30FPS; HD1280X720 120FPS;
3D visual effect
AD407 digital microscope has 4 Mega pixels HD Sensor. The display and stand is adjustable to help you get a bigger working space, keep a comfortable working pose and offer real 3D effect visual.
Metal lens and great depth of field
AD407 is equipped with metal lens which feels good and is wear-resisting. It has great depth of field. The 2 led lights are adjustable by press the dimmer switch.
Monitor and microscope display simultaneously
HDMI output is supported. The microscope can be connected to a big display. It is very convenient for a demo.
wireless remote control
The wireless remote control and the buttons on the monitor both allow you to take pictures, record videos, zoom in, zoom out, image reversal and other simple operations.
UV filter to protect the lens
The UV filter is makde of good quality and can help protecting the lens from being damaged by the dust, heat and smoke.
AD407-Basic Parameters
Image sensor: 4 Mega Pixels HD Sensor
Video output: MP4, UHD 2880X2160 24FPS, FHD1920X1080 60FPS/30FPS, HD1280X720 120FPS
Magnification Ratio: Up to 270X (27 inch HDMI monitor output)
Photo resolution: JPG, MAX 4032*3024 (12M 4032*3024)
Minimum focus distance: 5cm
Frame Rate: Max 120f/s (under 600 Lux Brightness& HDP120)
Storage: Micro-SD card (not included), up to 64G
Power source: 5V DC
Stand size: 20cm*12cm*19cm
What you can get?
AD407 Microscope host*1
UV filter*1(assembled in front of the lens)
Metal base plate*1, Metal Column*1
Wrench*1, Metal clips*2
HDMI cable*1, Switch cable*1
Power plug*1, Remote control*1
Instructions*1
Brett C.
Reviewed in the United States on January 31, 2025
The microscope, camera, and screen work very well. But I don't like the stand. It does not go as high as I would like, and every time I need to reposition it I have to loosen and tighten some screws.So I bought an Elgato Wave Mic Arm Premium: https://www.amazon.com/Elgato-Wave-Mic-Arm-Broadcasting/dp/B09737ZXMK At first I thought I would need to make an adapter to use the wave mic arm with the microscope. But it just so happens that the Elgato arm uses the same screw thread as the microscope mount! (see photo).With the above mentioned modification it is much easier to position the scope wherever I want. It saves a lot of time and greatly extends the vertical range.
Stefan
Reviewed in Germany on September 16, 2024
Ich habe das Mikroskop für den Hobbybereich (Messer schleifen) bestellt.Das Produkt ist super verpackt, lässt sich leicht aufbauen und hat eine hochwertige Haptik. Der Zoom und die Bildqualität sind für meine Zwecke gut, und die Bedienung ist intuitiv.Für den privaten bzw. Hobbybereich kann ich das Gerät auf jeden Fall weiterempfehlen.
Bernie Schellenberg
Reviewed in the United States on June 16, 2024
I use this all the time. The video quality is awesome! The size is perfect for the repairs that I bought it for. It’s very versatile, use it with my kids to see textures of other materials. The magnification range is good and the ease of use is exceptional. The performance exceeds my expectations.
Kindle Customer
Reviewed in the United States on December 23, 2024
Love this scope, for soldering and working on small electronics, it is super useful. I paired it with a nice wide angle lens.
Lori H
Reviewed in Canada on December 20, 2024
It works great!
George J. Francis
Reviewed in the United States on November 12, 2024
I wasn't expecting a lot for the price, but was pleasantly surprised. I use this for electronic circuit inspection (and other random things in the lab). Has HDMI output and writes images to a standard memory card. The lights do get really hot if you leave them on, but they're very bright, and thus very useful.
Fluffy06
Reviewed in France on October 24, 2024
Très satisfait de ce microscope que j'utilise principalement pour de la soudure
Patrik Kallback
Reviewed in Sweden on May 22, 2023
Allt funkar och man får kanonskärpa med mjuka kontraster så man ser komponenter ordentligt för ytmontering. För den som har en stadig hand går det att montera resistorer och kondensatorer ner till 0402 storlek.
PassaP
Reviewed in the Netherlands on July 17, 2022
A great piece of kit for the price. I'm very impressed by the image quality and how easy it is to use.The mounting platform is a little limited if you want to do some work underneath the microscope lens. It doesn't really go high enough.I would've preferred a more simple wire loom. There's a lot of cables going everywhere.
DC
Reviewed in the United States on February 17, 2021
After months of agonizing over not having a better microscope and being unable to justify dropping over $600 on a higher-end interchangeable-lens/autofocus camera setup + a Barlow lens, I decided to buy this as it seemed to tick all the boxes for my needs a few of my wants. Overall, I was impressed with the picture quality, but part of me still missed the high-end optics and auto-focus.Then, thanks to another reviewer (props RCJad!), I decided to add the Xit XT30WAB 30mm 0.43X Wide Angle Lens ($11.40 on Amazon) and it's made the AD407 so much better. The XT30WAB lens brings a slightly wider to see more of the PCB and it has a Depth-of-Field (DoF) of approximately 1 inch/25 mm, making PCB requiring far less refocusing while you work! Now, I can see the PCB *and* my tools, tall components, etc. while I work. Now I can tilt a PCB to inspect it WITHOUT constantly refocusing or shifting the board up and down. I'd still love to have autofocus, but with this DoF, I don't really need/miss it most of the time. (Andonstar - You need to sell these or similar as your own so buyers don't have to research them on their own.)Keep in mind, even with the additional lens, the AD407 isn't going to compete for with a $600+ microscope with interchangeable lenses, a larger/taller stand and a camera with autofocus, but this is half the cost, a great formfactor for a workbench, has a very nice display built-in and it works really well for all but really large PCBs. Just get a wide-angle/macro lens and you'll enjoy it a whole lot more.Note: There are also mods that people do mount these cameras to microphone stands/arms to allow you to raise them higher or work on larger PCBs (large motherboards, arcade PCBs, retro computer repair, etc.). It does require some rewiring of the LED lights, however.
B Haley
Reviewed in the United States on December 31, 2021
First: the screen and microscope are great. The controls might be slightly obtuse but it's good quality, low latency, and everything (including HDMI output - pair this with a BlueAVS capture card) works as intended.However, the stand sucks. It really sucks. It's not unusable per se, but it definitely gets in the way and doesn't work very well at all, and even if it did, it doesn't allow the microscope/screen assembly to raise high enough for less-micro work. The gooseneck LEDS are so-so as well. The one star off is for the stand.Get this, and when you're ready to upgrade away from the stand, mount this thing onto a mic arm and get a microscope ring light to go with it. It's way more useful and usable this way. Unfortunately there are no mounting holes; I chose to 3D print a mount and 5 min epoxy it to the back. If there were at least some sort of mounting holes on the back, I would've given this 5 stars. You can probably 3D print/mill/whatever a ring mount that secures it to the mic arm the same way as the old stand as well. Figure something out, because it's worth it to get it off the old stand.
_Customer
Reviewed in the United States on April 3, 2021
I do a lot of tinkering with electronics. For decades, I’ve relied on my trust 10x eye loupe to inspect part numbers, color codes, solder joints, whatever. Trust me when I say - this digital microscope is the best thing since... well... 10x eye loupes. No more squinting. No more trying to angle the object just right under the desk lamp. This scope just works. The ability to photograph the image for future reference or documentation is just icing on the cake.If I had one complaint, it would be that the adjustable focal distance is not optimal. I quickly found myself wanting a wider angle of view — the lense allowed it but the vertical travel topped out too soon. I solved this by designing and 3D printing a 87mm spacer and buying two 100mm screws to lift the bracket off the plate enough to fully utilize the entire focus range of the lens. Not a necessary modification by any means, but worthwhile if you have the means and desire.
Recommended Products