Your cart is empty.
Your cart is empty.
Product description
Product Name: Taper Reamer
Specifications:1/8” --1/2”.(3mm-12mm),1:10 (taper)
Applications: used for countersunk, chamfer, reverse taper
Features:
High Quality
Made of hardened & tempered tool steel with precision ground cutting edges, precision machined cutting edges smooth metal surfaces with little effort.
Increased Leverage
T-handle provides leverage for easier reaming with greater control and easier turning, a great tool for enlarging drilled holes in wood/wood latches/guitar/wood worker/luthier/repairman maintenance.
Removes Burrs
Remove burrs from wood, cut pipe, tubing and conduit. Inside deburring edge tool with capacity of 3mm to 12mm.
Massimo
Reviewed in Italy on February 2, 2025
Utilizzato per cambiare le meccaniche di una stratocaster, con delle Schaller dal diametro più grande 10mm. Lavoro perfetto, sono riuscito ad allargare i fori in maniera molto precisa.
Famlie Guitars
Reviewed in the United States on February 1, 2025
works great for my uses!
Matthew
Reviewed in the United States on July 15, 2024
Wood Reamer. This lil' handheld tool is legit. Handle is attached well..nice & solid. This joker is good n sharp. Balanced & even from top to bottom. I just needed to expand some smaller holes that were already drilled into an inch of some beautiful cherry plinths...so I could screw attenuators into the wood.I didn't want to spend a small fortune & the handheld gave me more control of the hole size I needed.This Reamer was of nicer quality than I expected. I guess I was expecting something light in weight with a screwy handle. For my uses this Reamer could last me forever.Came in a nice box instead of just thrown in a bag.
WildCat1
Reviewed in the United States on June 24, 2024
I just upgraded my Epiphone Les Paul pots and wiring. I needed to enlarge the wholes in body to fit the larger CTS pots. This tool worked perfectly. It is sharp and opened up the holes very cleanly. Very impressed. And feels like a quality tool that I will have in my toolbox going forward.
Cilu B.
Reviewed in Germany on June 24, 2024
simple and effective
Chuck from Chicago
Reviewed in the United States on November 3, 2024
Enlarges holes cleanly!
Alma Hylton
Reviewed in the United States on November 22, 2024
I wanted to change the machine heads on my ukulele and the holes were not big enough so I bought this tool and it did the job very well.
J. Hartman
Reviewed in the United States on October 20, 2024
I used this to install an LR Baggs HiFi Duet in my D28. There was a small hole from the strap button installed at the factory, so I used this reamer to widen the hole to the needed half inch opening. The reamer blade is very sharp. I started slowly and frequently removed the reamer and vacuumed it clean. It took several minutes to completely open the hole. You do have to go all the way in for the jack to easily fit. This was much less expensive than some of the luthier step drills I was looking at and far less scary.I would highly recommend this if you are comfortable working with wood and confident in your ability to control the reamer.
Ross V
Reviewed in the United States on May 27, 2023
This is a good tool that can easily achieve the 10 mm holes needed for many common tuners used in electric guitars. That ability makes it a good complement to the StewMac reamer, which oddly maxes out at 9.5 mm. The only downside: this reamer isn't quite as sharp as the SM model, slowing down your progress when working with a maple headstock.
Göran D
Reviewed in Sweden on October 24, 2023
som sagt fungerar bra och kostar ok
Joel C. Beaupre
Reviewed in the United States on December 25, 2022
Luthiers need the taper of a reamer expressed as a degree, since bridge pins come in either a 3 or 5 degree taper. This one appears to be just shy of 3 degrees (2.7).
Trevor McMahon
Reviewed in the United Kingdom on November 22, 2022
Very happy with this product. Bought it to ream out a 13mm hole on my precious archtop guitar to install a pick up. In my mind a drill is too rough. This reamer is just the job. You can insert it and slowly turn it until the hole is complete without chipping of paint of wood, cuts very clean. Probably won't use it again for a long time but it's nice to know it's there.
Mballj
Reviewed in France on April 29, 2022
J'ai acheté cet outil pour modifier les trous de fixation des mécaniques de mon manche de guitare Harley Benton. Il est facile d'utilisation, pour les novices comme moi, il faut y aller avec précaution et vérifier régulierement les dimensions des trous pour ne pas dépasser les dimensions souhaitées. Ça m'a permis de changer mes mecaniques facilement et de faire un travail propre sur le manche. Je suis satisfaite.
Recommended Products
