Your cart is empty.
Your cart is empty.You need a fuel injector nozzle adaptor.
bigdan911
Reviewed in Canada on February 10, 2025
Toutes voitures modernes sont a injectionCet instrument simule les pulsations des injecteurs afin de recréer leur fonctionnement dans le moteurJe recommandés fortement
Cero formalidad .no expiden facturas
Reviewed in Mexico on January 10, 2025
Excelente
Roman E. Johnston
Reviewed in the United States on June 18, 2024
For the money, this is really a great tool. I do recommend using a Dremel tool with a little bit on it to cut the notch where the fuel injector tab rubs up against the base when you plug it in. The injector as well as using this tool will be more stable and not try to pop out.
Customer
Reviewed in the United States on May 4, 2024
Got this for my 1999 LS1 fuel injectors. I did not know that the tester's electrical connectors were too big to fit the injector plug. So I ordered an LS1 injector pigtail and plugged it into the tester leads. That made it easy to connect. My injectors fit in perfectly to the larger adapter but with pressure from the carburetor cleaner, it pops right out. So I used a zip tie to hold it all together as shown and that helped a lot. Working in my engine bay as I plugged the tester to the battery, I taped the tester to the fender to free up one hand. Push down onto the cleaner can and aim for your catch pan. The pulsing from the tester worked great.
Dave
Reviewed in the United States on March 16, 2024
Used for 2003 Toyota 4Runner 4.7L fuel injectors. Although I'm sure the injectors were cleaned in the process, I primarily wanted to make sure an injector was working properly. Considering rebuilt Toyota injectors are more than $150 each, this device saved me a lot of money.1. You can clearly hear the injector pulsing, so you know the solenoid is working.2. Using the adapter to run throttle body cleaner through, you know the injector isn't clogged.3. When using the spray can adapter, press down firmly and it will seal against the can, fill up the adapter, but nothing will flow until you pulse the injector.4. My 4Runner injector fit the adapter perfectly and made a tight seal with the old O-rings
Crocodile
Reviewed in the United States on December 9, 2024
Best option while cleaning engine injectors.
Kahunarich
Reviewed in the United States on December 18, 2024
It did a good job cleaning the injectors on my G37. However it can be a little cumbersome for one person. The leads should be longer. Not great for ergonomics. I ended up using a portable starter booster battery for power which gave me more room to work. Also, I had to disconnect-reconnect power in order change modes. Otherwise it worked well. A couple of tips... protect the case from the brake cleaner because it will melt the plastic. And apply the spray pressure slowly and secure the injector or it will pop out of the cleaner. Good product for the price.
Customer
Reviewed in the United States on December 17, 2024
It has all the functions it claims to have. Worked decent enough. Takes a moment to get the rhythm when you are cleaning injectors by yourself. Adapters fit as well as expected.
Ted C
Reviewed in the United States on April 6, 2024
It does work, but it is really a 2 person job. One to hold the injector/adapter/carb cleaner can, and the other to press the pulse button. Tried to do it myself, but only made a mess with carb cleaner shooting everywhere. I need to rig something up to hold the injector in the adapter. You just can't hold the injector in the adapter with one hand and press down on the can, then push the pulse button with the other. I had to get a kiddo to push the button while I did the other part, and it went much smoother. NOTE, WEAR EYE PROTECTION!! CARB CLEANER CAN SHOOT EVERYWHERE. Another issue is the supplied blade connectors were too big to fit into my injectors. Ended up using small alligator clips. No big deal. Last thing, make sure carb cleaner does not contact the base unit, or it will melt the plastic. Yeah, I found out the hard way. Bottom line is, yes, I would buy this item again if I had to.
Shawn
Reviewed in the United States on August 11, 2022
Pros: Simple to use. Different pulse modes and continuous spray mode. Case included. Does the job in one little somewhat convenient package.Cons: No on/off switch. Must disconnect from battery power to turn off or to change pulse modes. To change pulse mode after initial test of injector you must disconnect for battery power to reset tool. Injector test terminals are standard size which do not fit all injector terminals. Had to use jumper wire with alligator clips to attach to injector. Slightly annoying.
masbosio
Reviewed in Italy on August 21, 2021
Funziona. Molto semplice l'utilizzo. Provato con i Landi tappo arancio e wd40. Al momento ok. 4 funzioni . Si alimenta con i cavi della batteria ma c'è anche l'alloggio per le stilo. Vediamo quanto dura. Anche se, in realtà, l'operazione andrebbe fatta una volta l'anno oppure in caso di un pieno GPL sporco. Cmq ok
John Okolisan
Reviewed in Canada on July 24, 2021
The tester arrived the day after placing my order (Prime 2-day shipping). Within 5 minutes of use, I diagnosed the cause of a lean misfire on my F150, which turned out to be a stuck fuel injector, and got it freed up by tapping the injector while pulsing it using the tester. Hopefully a couple bottles of fuel system cleaner will prevent future sticking injectors. If I never use this tool again, it will still be worth 10X the price paid!
Laszlo Budai
Reviewed in Germany on November 24, 2020
Product works as advertised no problems so for, but i have only used it for for injectors.
Recommended Products
