Your cart is empty.
Your cart is empty.Product Description
LUTIFIX HTS705 Dry ice cleaning uses compressed air as power to spray dry ice particles to the surface of the cleaned object at supersonic speed. It uses the ultra-low temperature performance of dry ice to achieve the purpose of decontamination.The cleaned dry ice will evaporate in the environment, safe and without residue, and will not damage the vehicle.
WIDELY USED
LUTIFIX HTS705 dry ice machine are suitable for removing stuck and flaking formulations, silicone and rubber residues, oils, greases, turpentine, asphalt, dirt, inks, resins, adhesives, waxes and paints, chewing gum, and graffiti. It has been widely used in rubber, casting, automobile, marine, electric power, chemical, printing, plastic, food, pharmaceutical and aviation fields.
PROTECTION AND SAFETY
LUTIFIX dry ice cleaning will not cause wear or tear on the cleaning parts . Carbon deposits will become powder instantly under the impact explosion of high-pressure air and -78.5℃ dry ice particles, and finally, the dry ice sublimation decomposes and impurities are discharged from the engine through compressed air. The whole process is non-toxic, which will not cause secondary pollution.
HIGH-EFFIENCY CLEANING
LUTIFIX Dry ice cleaners can remove adhering dirt thoroughly, while also providing good protection for the equipment to avoid interfering with the operation and use of the equipment during cleaning.
CLEANING TIME & ICE CONSUMPTION
Factors:
Cleaning degree
Carbon deposits AMT
Technician's skill
Avoid personal injury caused by hazardous substances.
OPERATION STEPS
- Step 1: Connect the air source andpower supply:
- Step 2: Connect the ice blasting gun;
- Step 3: Connect the ground wire;
- Step 4: Add in dry ice;
- Step 5: Turn on the power and adjustthe amount of dry ice;
- Step 6: Start cleaning;
PRODUCT DETAILS
LUTIFIX HTS705 Automotive Dry Ice Cleaning Machine*1 pc
Ice shovel: *1 pc
Gloves: *1pc，Earplugs: *1 pc
Safety goggles: *1 pc
Intake hose: *1 pc
Ice outlet hose: *1 pc (with signal line)
1* A set of blasting gun accessories (flat head barrel, 35cmΦ5 elbow, 35cmΦ5 elbow, 35cmΦ4 straight tube, 35cmΦ4 straight tube, 50cmΦ5 hose)
1*Hand-held spray gun
Certificate: *1 pc
User Manual: *1 pc
Intelligent microcomputer can precisely control the pressure, which can freely adjust the pressure and ice rate.
Quickly remove all kinds of intractable dirt.
MULTI- FUNCTIONS
Using dry ice cleaning instead of toxic chemicals cleaning, to avoid the harm caused by hazardous substances on the personnel;
dry ice machine can quickly clean a variety of dirt, effective cleaning equipment, improve productivity;
Adopting the intelligent microcomputer design,the pressure and the speed of dry ice spraying can be accurately adjusted through the intelligent control panel according to needs to achieve the best cleaning effect.
After the Cleaning Work:
1. Turn the dry ice volume adjusting controller to “0” and start the spray gun to spray for 30-50s until no water is sprayed.
2. The dry ice residue can be removed by extending the product’s spraying time, and manual cleaning is required if necessary.
3. Turn off the power switch, disconnect the air source, and store the spray gun and accessories.
SPECIFICATIONS
Power supply: AC110V/220V±10% 50Hz
Dry ice capacity: 5KG
Compressed air flow: >1~3.0m³/min
Dry ice particle state: 3mm
Air supply pressure: 0.3~1.0Mpa
Dry ice blasting amount (adjustable): 0~3.2KG/min
Dimensions: 460mm x 660mm x 835mm
Trachea length: 8m
Net weight: 45KG，Gross weight: 50KG
mike
Reviewed in the United States on January 27, 2025
Need a large air compressor to run.
Recommended Products